Formation Law of Surface Defects in Stretch-Bending Formamtion of Aluminum Trim Strip for Automobile Body

doi:10.16183/j.cnki.jsjtu.2020.323

Abstract

Abstract:

Surface defects refer to the local undulation of the parts in the forming process. The variable cross-section and variable-curvature aluminum trim parts are prone to local surface defects during the stretch-bending process, which has a great impact on the appearance of the whole vehicle. Research on the formation mechanism of surface defects has important guiding significance for the prevention and control of surface defects. In this paper, the formation mechanism of the deformation defects of the stretch-bending forming surface of aluminum trim is studied, the stretch-bending forming test and the surface defects measurement are conducted, and the simulation model of the stretch-bending forming of aluminum trim is established by using the Abaqus software platform. In addition, the forming process of surface defects is analyzed. The results show that when the ratio of section width to bending radius is larger than 35%, the part will have a warping tendency, and the joint action of section shape, upper die, and padding will cause local surface defects.

Key words: aluminum trim, surface defects, stretch-bending forming, numerical simulation

CLC Number:

TG386

ZHENG Gaoyuan, ZHAO Yixi, CUI Junhui. Formation Law of Surface Defects in Stretch-Bending Formamtion of Aluminum Trim Strip for Automobile Body[J]. Journal of Shanghai Jiao Tong University, 2022, 56(1): 53-61.

Figures/Tables 23

Fig.1

Fig.2

Fig.3

Fig.4

Fig.5

Fig.6

Tab.1

Fig.7

Fig.8

Fig.9

Fig.10

Fig.11

Fig.12

Fig.13

Fig.14

Fig.15

Fig.16

Fig.17

Fig.18

Fig.19

Fig.20

Fig.21

Fig.22

References 8

[1]	ZHANG D F, SONG K C, XU J, et al. Unified detection method of aluminium profile surface defects: Common and rare defect categories[J]. Optics and Lasers in Engineering, 2020, 126:105936. doi: 10.1016/j.optlaseng.2019.105936 URL
[2]	DE PAULSEN F, WELO T. Cross-sectional deformations of rectangular hollow sections in bending: Part II—Analytical models[J]. International Journal of Mechanical Sciences, 2001, 43(1):131-152. doi: 10.1016/S0020-7403(99)00107-1 URL
[3]	谷诤巍, 徐虹, 赵立辉, 等. 基于PS2F软件的型材拉弯成形工艺研究[J]. 电加工与模具, 2009(3):69-71.
	GU Zhengwei, XU Hong, ZHAO Lihui, et al. Research on profiles stretch bend forming process by PS2F software[J]. Electromachining & Mould, 2009(3):69-71.
[4]	GU Z W, JIA L, LI X, et al. Stretch bending defect control of L-section SUS301L stainless-steel components with variable contour curvatures[J]. Journal of Iron and Steel Research International, 2019, 26(12):1376-1384. doi: 10.1007/s42243-019-00256-4 URL
[5]	叶凌, 邹炳燕, 魏青. 钢管折弯畸变原因分析[J]. 机械设计, 2018, 35(Sup.1):267-269.
	YE Ling, ZOU Bingyan, WEI Qing. Analysis on the causes of distortion in the process of pipe bending[J]. Journal of Machine Design, 2018, 35(Sup.1):267-269.
[6]	万里翔, 刘杰, 李志超, 等. 汽车门框上条拉弯分析及截面变形评价方法[J]. 华南理工大学学报(自然科学版), 2018, 46(4):16-21.
	WAN Lixiang, LIU Jie, LI Zhichao, et al. Analytical methods for stretch and bending deformation of car door sash and evaluation of cross section shape[J]. Journal of South China University of Technology (Natural Science Edition), 2018, 46(4):16-21.
[7]	SHEN H Q, LI S H, CHEN G L. Quantitative analysis of surface deflections in the automobile exterior panel based on a curvature-deviation method[J]. Journal of Materials Processing Technology, 2012, 212(7):1548-1556. doi: 10.1016/j.jmatprotec.2012.03.005 URL
[8]	WANG H P, XU S G, CAO J. Prelimilary study on a surface distortion predictor for sheet metals: Validation in Yoshida buckling problems[C]// Institute of Virtual Manufacturing. Switzerland: Numisheet, 2008: 787-795.

截面编号	D_zj/mm
1	0.021
2	0.053
3	0.089
4	0.114
5	0.083
6	0.041
7	0.028
8	0.012

[1]	JIN Tao, GAO Bin, WANG Qiangqiang, ZHOU Hang, HE Wen, FENG Shaokong. Inversion and Simulation Algorithm of High-Density Surface Wave Method for Pseudo Co-Seismic Source and Its Application [J]. Journal of Shanghai Jiao Tong University, 2025, 59(7): 1029-1040.
[2]	CHEN Anran, JIA Dao, HE Wei. Numerical Simulation Research on the Characteristics and Influence Factors of High-Velocity Fragment Penetrating Panel [J]. Air & Space Defense, 2025, 8(6): 53-61.
[3]	ZHANG Qiang, CHEN Zhenhua, WANG Wenlong, SU Huaiwei, CHI Dejian. Numerical Simulation Study on Damage Characteristics of Reinforced Concrete T-Beam Bridge Under Blast Point Control [J]. Air & Space Defense, 2025, 8(5): 83-90.
[4]	WANG Ziyang, WANG Xiaohua, GUO Chongxiao, et al. Study on Oil Flushing Process and Method Optimization [J]. Ocean Engineering Equipment and Technology, 2025, 12(4): 104-115.
[5]	GONG Chao, HOU Yuanhang, ZHANG Yuqi, LIU Dianyong, WAN Yuejin. Characterization of Surface Motion of Submerged Unmanned Ship in Freak Waves Environment [J]. Journal of Shanghai Jiao Tong University, 2025, 59(4): 447-457.
[6]	WU Xiaolong, XIA Kailong, MENG Dejun, HAO Shengchun, ZHU Mingmin. Experimental and Numerical Simulation Study of Compressors with Non-Axisymmetric Layouts [J]. Journal of Shanghai Jiao Tong University, 2025, 59(12): 1916-1928.
[7]	LI Yi, OU Shuyan, LIANG Weidong, DONG Jiabao, ZHUANG Zhidong. Numerical Simulation of Rocket Fairing Spin Separation in Low-Altitude High-Dynamic-Pressure Environment [J]. Air & Space Defense, 2025, 8(1): 102-108.
[8]	XU Haodong, YU Tongzhen, FAN Wei, LI Mingguang, LIU Nianwu. Influence of Slurry Diffusion on Drag Reduction During Pipe Jacking Cnstruction [J]. Journal of Shanghai Jiao Tong University, 2024, 58(7): 1067-1074.
[9]	DENG Hefang (邓贺方), XIA Kailong (夏凯龙), TENG Jinfang (滕金芳), QIANG Xiaoqing (羌晓青), ZHU Mingmin^∗ (朱铭敏), LU Shaopeng (卢少鹏). Performance Effect of Trench Casing on a Transonic Compressor at Different Rotating Speeds [J]. J Shanghai Jiaotong Univ Sci, 2024, 29(6): 1151-1160.
[10]	LIU Yibo1, BI Yuqin1, MA Qiang2, 3, XIAO Huaping1, LIU Shuhai1. Design and Optimization of Impeller for Underwater Helico-axial Multiphase Pump [J]. Ocean Engineering Equipment and Technology, 2024, 11(4): 14-20.
[11]	FENG Yangyang, DING Haoliang, HU Pingshan, YAN Bo. Steady-State Temperature Field Simulation of Injection Mold Based on Finite Volume Method [J]. Journal of Shanghai Jiao Tong University, 2024, 58(4): 461-467.
[12]	WANG Hui, DU Dengxuan, LIU Haichao, YU Guoliang, ZHANG Minxi. Numerical Study on Local Scour at Composite Piles with Collars in Uniform Flows [J]. Ocean Engineering Equipment and Technology, 2024, 11(3): 1-9.
[13]	HONG Lei¹ (洪蕾), XIAO Hao¹ (肖皓), YE Jia² (叶佳), MA Guohong^1* (马国红). Numerical Simulation of Radial Ultrasonic Assisted MIG Welding Arc [J]. J Shanghai Jiaotong Univ Sci, 2024, 29(2): 330-338.
[14]	LI Shuxun (李树勋), SHEN Hengyun^* (沈珩云), LIU Bincai (刘斌才),HU Yinggang (胡迎港), MA Tingqian (马廷前). Pressure Pulse Response of High Temperature Molten Salt Check Valve Hit by Crystal Particles [J]. J Shanghai Jiaotong Univ Sci, 2024, 29(2): 271-279.
[15]	GUO Tongbiao, ZHANG Ji, LI Xinliang. Direct Numerical Simulation of Strong Shock Wave and Boundary Layer Interactions in a Compression Corner [J]. Air & Space Defense, 2024, 7(2): 29-35.