Flow Field Dynamic Characteristics of Slit Cylinders

doi:10.16183/j.cnki.jsjtu.2019.99.002

Abstract

Abstract: The particle image velocimetry (PIV) experiments are carried out to qualitative and quantitative study the flow field dynamic characteristics for different slit cylinders in order to reveal the influence of the Re, the slit position, the incline angle and width of the slit on the overall flow characteristics. The transient flow field, the time-averaged flow field and the Sr are obtained and the detailed overall flow structures and its transformation disciplines are studied. The results show that the interactions of the shedding vortex and the circumflux around the cylinder surface induce the blow-suction effect of the 120° and 180° slits, which makes the wake shedding vortex coupling happen significantly earlier. The 240° slit is close to the cylinder trailing edge so that the flow separation already happens before the fluid reach the slit, which fails to generate the effective blow-suction effect. The wake flow resistances for the 120° and 180° slit cylinders are higher because the motion trajectory amplitudes of shedding vortex are higher than that of the basic and 240° types. Sr values for the slit cylinder with α=180° and s/d=0.15 (α is the slit angle, s is the gap width, d is the cylinder diameter) are in the range of 0.218～0.225, which exhibits the strongest linear stability.

Key words: slit cylinder; particle image velocimetry (PIV); blow-suction effect; shedding vortex

CLC Number:

O 357.1

ZHU Rui,LI Shang,CHEN Ziyu,LIU Jinsheng,BAO Feng,LIU Zhirong. Flow Field Dynamic Characteristics of Slit Cylinders[J]. Journal of Shanghai Jiaotong University, 2019, 53(10): 1238-1248.

References

［1］GAO D L, CHEN W L, LI H, et al. Flow around a circular cylinder with slit［J］. Experimental Thermal and Fluid Science, 2017, 82: 287-301.
［2］RAHMANI A M, SHAO Y, JUPITERWALA M, et al. Nanoscale flow past a colloidal cylinder confined in a slit channel: Lubrication theory and mole-cular dynamics analysis［J］. Physics of Fluids, 2015, 27(8): 082004.
［3］ORDIA L, VENUGOPAL A, AGRAWAL A, et al. Vortex shedding characteristics of a cylinder with a parallel slit placed in a circular pipe［J］. Journal of Visualization, 2017, 20(2): 263-275.
［4］LIU D, CHAO C Q, WANG Y Z, et al. Axial slit wall effect on the flow instability and heat transfer in rotating concentric cylinders［J］. Journal of Mechanical Science and Technology, 2016, 30(12): 5513-5519.
［5］WANG J S, WANG C. Heat transfer and flow cha-racteristics of a rectangular channel with a small circular cylinder having slit-vent vortex generator［J］. International Journal of Thermal Sciences, 2016, 104: 158-171.
［6］MA H L, KUO C H. Control of boundary layer flow and lock-on of wake behind a circular cylinder with a normal slit［J］. European Journal of Mechanics-B/Fluids, 2016, 59: 99-114.
［7］WANG J S, DONG Y W. The numerical investigation of flow and heat transfer characteristics of flow past a slit-cylinder［J］. Science China Technological Sciences, 2017, 60(4): 602-612.
［8］刘志荣, 邹赫, 刘锦生, 等. 开缝圆柱缝隙倾斜角对脱落涡的影响［J］. 北京航空航天大学学报, 2017, 43(1): 128-135.
LIU Zhirong, ZOU He, LIU Jinsheng, et al. Effect of angle of slit on shedding vortex of slotted circular cylinder［J］. Journal of Beijing University of Aeronautics and Astronautics, 2017, 43(1): 128-135.
［9］江建华, 鲍锋. 基于POD方法开缝圆柱绕流流场的研究［J］. 气体物理, 2017, 2(2): 28-36.
JIANG Jianhua, BAO Feng. POD analysis of a slit circular cylinder near wake［J］. Physics of Gases, 2017, 2(2): 28-36.
［10］WANG J S, WANG C. Features of flow past a circular cylinder with a slit［J］. Scientia Iranica. Transaction B, Mechanical Engineering, 2016, 23(5): 2097-2112.
［11］LIU D, ZHU J, WANG Y Z, et al. Study of slit wall aspect ratio effect on the flow stability and heat transfer in rotating concentric cylinders［J］. Journal of Engineering Research, 2017, 5(3): 216-229.
［12］ZHU H Y, WANG C Y, WANG H P, et al. Tomographic PIV investigation on 3D wake structures for flow over a wall-mounted short cylinder［J］. Journal of Fluid Mechanics, 2017, 831: 743-778.
［13］冯俊杰, 孙冰, 姜杰, 等. 射流场中单个气泡破裂的CFD模拟与PIV实验研究［J］. 高校化学工程学报, 2018, 32(2): 286-294.
FENG Junjie, SUN Bing, JIANG Jie, et al. CFD simulation and PIV investigation on single bubble breakup in turbulent jet flow［J］. Journal of Chemical Engineering of Chinese Universities, 2018, 32(2): 286-294.
［14］贾宇鹏, 王景甫, 郑坤灿, 等.应用粒子图像测试技术测量球床多孔介质单相流动的流场［J］. 物理学报, 2016, 65(10): 106701.
JIA Yupeng, WANG Jingfu, ZHENG Kuncan, et al. Measurement of single phase flow in porous media using PIV technique［J］. Acta Physica Sinica, 2016, 65(10): 106701.

[1]	QIN Suyang,XIANG Yang,LIU Hong. Comparative Study of Kinematics Characteristics of Vortex Rings Generated by Piston and Disc [J]. Journal of Shanghai Jiaotong University, 2016, 50(02): 294-299.
[2]	LI Chun-Xi, SHEN Lei, YE Xue-Min, TONG Jia-Lin. Investigation on Dewetting Dynamics of Thin Liquid Film Containing Insoluble Surfactant [J]. Journal of Shanghai Jiaotong University, 2013, 47(04): 572-578.
[3]	SUN Xue-Yao-a, ZHANG Huai-Xin-a, b , PAN Xu-Jie-a. A Technique of Reduction Pressure Fluctuation for Moving-Particle Semi-implicit Method [J]. Journal of Shanghai Jiaotong University, 2011, 45(10): 1450-1454.
[4]	PAN Xujiea,ZHANG Huaixina,b,SUN Xueyaoa. A Free SurfaceTraced Method for Moving Particle Semiimplicit Method [J]. Journal of Shanghai Jiaotong University, 2010, 44(01): 134-0138.
[5]	PAN Xu-jie,ZHANG Huai-xin. MovingParticle SemiImplicit Method for Simulation of Liquid Sloshing on Roll Motion [J]. Journal of Shanghai Jiaotong University, 2008, 42(11): 1904-1907.
[6]	TU Jiahuang，ZHOU Dai，MA Jin，LU Jiabao. Two-Degree-of-Freedom Flow-Induced Vibration of an Isolated Cylinder Structure in Planar Shear Flow [J]. Journal of Shanghai Jiaotong University, 2014, 48(02): 252-259.
[7]	LIU Qiang,XIE Wei,QIU Liaoyuan,XIE Xueshen. Graphic Processing Unit Computing of Lattice Boltzmann Method on a Desktop Computer [J]. Journal of Shanghai Jiaotong University, 2014, 48(09): 1329-1333.