Modelling and Simulation of Temperature and Humidity Distribution
 in Curing Rooms of Concrete

doi:10.16183/j.cnki.jsjtu.2018.12.001

Abstract

Abstract: Temperature and humidity distribution of curing rooms which are mainly used in the production line of concrete component factory are studied by simulation. Considering high temperature and high humidity in the curing room, wall condensation and mist condensation are used to simulate the condensation in the room. The simulation results show that the relative humidity of most areas reaches 100% very fast, but the temperature distribution is extremely uneven and temperature difference is up to 26℃. In addition, by changing the nozzle orientation, position and quantity, it is found that the temperature is more uniform when the nozzle is downward; when the nozzle is located in 46% to 65% of the total height of the room, the temperature distribution achieves the best uniformity; the increase in the number of nozzles can improve the temperature distribution between the nozzles.

Key words: curing rooms of concrete, temperature and humidity distribution, numerical simulation, condensation simulation, optimization analysis

CLC Number:

TANG Jiedong,ZHAI Xiaoqiang. Modelling and Simulation of Temperature and Humidity Distribution in Curing Rooms of Concrete[J]. Journal of Shanghai Jiao Tong University, 2018, 52(12): 1543-1551.

References

［1］祁建, 霍光, 李宣, 等. PC自动化生产线养护工艺及养护系统研究［J］. 建筑机械化, 2016(4): 21-24. QI Jian, HUO Guang, LI Xuan, et al. Research on technology and system of PC automatic production line［J］. Construction Mechanization, 2016(4): 21-24. ［2］田耀刚, 彭波, 丁庆军, 等. 蒸养参数对高强混凝土抗硫酸盐侵蚀性能的影响［J］. 混凝土与水泥制品, 2010(3): 1-4. TIAN Yaogang, PENG Bo, DING Qingjun, et al. Effects of steam-cured parameters on sulfate resistance performance of high strength concrete［J］. China Concrete and Cement Products, 2010(3): 1-4. ［3］LI M Y, WANG Q, YANG J. Influence of steam curing method on the performance of concrete containing a large portion of mineral admixtures［J］. Advances in Materials Science and Engineering, 2017, 2017: 1-11. ［4］LONG G C, HE Z M, OMRAN A. Heat damage of steam curing on the surface layer of concrete［J］. Magazine of Concrete Research, 2012, 64(11): 995-1004. ［5］WANG Q, LI M Y, ZHANG B. Influence of pre-curing time on the hydration of binder and the properties of concrete under steam curing condition［J］. Journal of Thermal Analysis and Calorimetry, 2014, 118(3): 1505-1512. ［6］HWANG S D, KHATIB R, LEE H K, et al. Optimization of steam-curing regime for high-strength, self-consolidating concrete for precast, prestressed concrete applications［J］. Pci Journal, 2012, 57(3): 48-62. ［7］杨江朋. 晋陕黄河特大桥节段箱梁冬季蒸养方案设计［J］. 高速铁路技术, 2015, 6(3): 94-96. YANG Jiangpeng. Design of steam curing scheme in winter for segmental box girder of high-speed railway passenger dedicated line［J］. High Speed Railway Technology, 2015, 6(3): 94-96. ［8］ZHANG Y H, SUN H, LI X, et al. Study of steam-cured system impact on concrete compressive strength and prediction of strength model［J］. Materials Review, 2015, 29: 554-564 ［9］LI X, NIU W Y. Effect of supplementary curing after steam-curing on performance of concrete［J］. Materials Science Forum, 2015, 852: 1376-1382. ［10］中国建筑科学研究院.混凝土质量控制标准: GB50164-2011［S］.北京: 中国建筑工业出版社, 2004. China Academy of Building Research. Standard for quality control of concrete: GB50164-2011 ［S］.Bejing: China Architecture& Building Press, 2004. ［11］朱红钧. FLUENT 15.0流场分析实战指南［M］. 北京: 人民邮电出版社, 2015. ZHU Hongjun. FLUENT 15.0 flow field analysis practical guide［M］.Beijing: People’s Posts and Telecommunications Press, 2015. ［12］FU W, LI X W, WU X X, et al. Numerical investigation of convective condensation with the presence of non-condensable gases in a vertical tube［J］. Nuclear Engineering & Design, 2016, 297: 197-207. ［13］刘晖, 康勇. 新的水饱和压力与饱和温度计算方法［J］. 压缩机技术, 2005(6): 26-27. LIU Hui, KANG Yong. New method for calculating saturated pressure and saturation temperature［J］. Compressor Technology, 2005(6): 26-27. ［14］余徽, 朱家骅, 杜怀明, 等. 高湿度工业废气冷凝脱湿模型研究与数值模拟［J］. 化工学报, 2005, 56(8): 1389-1396. YU Hui, ZHU Jiahua, DU Huaiming, et al. Modeling and simulation of condensation and dehumidifying of high humidity industrial exhaust gases［J］. Journal of Chemical Industry & Engineering (China), 2005, 56(8): 1389-1396.

[1]	GONG Chao, HOU Yuanhang, ZHANG Yuqi, LIU Dianyong, WAN Yuejin. Characterization of Surface Motion of Submerged Unmanned Ship in Freak Waves Environment [J]. Journal of Shanghai Jiao Tong University, 2025, 59(4): 447-457.
[2]	LI Yi, OU Shuyan, LIANG Weidong, DONG Jiabao, ZHUANG Zhidong. Numerical Simulation of Rocket Fairing Spin Separation in Low-Altitude High-Dynamic-Pressure Environment [J]. Air & Space Defense, 2025, 8(1): 102-108.
[3]	XU Haodong, YU Tongzhen, FAN Wei, LI Mingguang, LIU Nianwu. Influence of Slurry Diffusion on Drag Reduction During Pipe Jacking Cnstruction [J]. Journal of Shanghai Jiao Tong University, 2024, 58(7): 1067-1074.
[4]	DENG Hefang (邓贺方), XIA Kailong (夏凯龙), TENG Jinfang (滕金芳), QIANG Xiaoqing (羌晓青), ZHU Mingmin^∗ (朱铭敏), LU Shaopeng (卢少鹏). Performance Effect of Trench Casing on a Transonic Compressor at Different Rotating Speeds [J]. J Shanghai Jiaotong Univ Sci, 2024, 29(6): 1151-1160.
[5]	LIU Yibo1, BI Yuqin1, MA Qiang2, 3, XIAO Huaping1, LIU Shuhai1. Design and Optimization of Impeller for Underwater Helico-axial Multiphase Pump [J]. Ocean Engineering Equipment and Technology, 2024, 11(4): 14-20.
[6]	FENG Yangyang, DING Haoliang, HU Pingshan, YAN Bo. Steady-State Temperature Field Simulation of Injection Mold Based on Finite Volume Method [J]. Journal of Shanghai Jiao Tong University, 2024, 58(4): 461-467.
[7]	WANG Hui, DU Dengxuan, LIU Haichao, YU Guoliang, ZHANG Minxi. Numerical Study on Local Scour at Composite Piles with Collars in Uniform Flows [J]. Ocean Engineering Equipment and Technology, 2024, 11(3): 1-9.
[8]	LI Shuxun (李树勋), SHEN Hengyun^* (沈珩云), LIU Bincai (刘斌才),HU Yinggang (胡迎港), MA Tingqian (马廷前). Pressure Pulse Response of High Temperature Molten Salt Check Valve Hit by Crystal Particles [J]. J Shanghai Jiaotong Univ Sci, 2024, 29(2): 271-279.
[9]	ZHANG Nianfan, XIAO Longfei, CHEN Gang. A Review of Numerical Studies of Wave Impacts on Marine Structures [J]. Journal of Shanghai Jiao Tong University, 2024, 58(2): 127-140.
[10]	GUO Tongbiao, ZHANG Ji, LI Xinliang. Direct Numerical Simulation of Strong Shock Wave and Boundary Layer Interactions in a Compression Corner [J]. Air & Space Defense, 2024, 7(2): 29-35.
[11]	HONG Lei¹ (洪蕾), XIAO Hao¹ (肖皓), YE Jia² (叶佳), MA Guohong^1* (马国红). Numerical Simulation of Radial Ultrasonic Assisted MIG Welding Arc [J]. J Shanghai Jiaotong Univ Sci, 2024, 29(2): 330-338.
[12]	HAN Xueyang, WU Lin, LIU Zhibing, YU Dongwei, KONG Xiangyi, ZHANG Dayong. Influence of Convection Heat Transfer of Tread Plate in Polar Environment [J]. Journal of Shanghai Jiao Tong University, 2024, 58(11): 1687-1697.
[13]	HE Wenxuan, YE Maosheng, ZHANG Yu, ZHANG Yatai, DAI Xiaohui, ZHANG Qi. Evaluation of the Ultimate Strength of Suspension Chains under Wear Conditions [J]. Ocean Engineering Equipment and Technology, 2024, 11(1): 23-29.
[14]	ZHU Xiaodong, ZHOU Dongrong, GAO Dingquan. Numerical Simulation of Coupled Dynamic Response of Integral Salvage of Large Tonnage Wreck [J]. Journal of Shanghai Jiao Tong University, 2023, 57(S1): 203-212.
[15]	LI Muzhi, BAO Wenqian, WANG Xiucheng, ZHANG Yiming, YUAN Yuchao, TANG Wenyong. Collision Simulation Method and Protection Mechanism of Composite Fenders for Ships [J]. Journal of Shanghai Jiao Tong University, 2023, 57(6): 680-689.

Modelling and Simulation of Temperature and Humidity Distribution in Curing Rooms of Concrete

PDF (PC)

Knowledge

Cited

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments