A Mixed EHL Model of Finite-Length Line Contact Considering Asperity
 Elasto-Plastic Deformation and the Lubricant Properties

doi:10.16183/j.cnki.jsjtu.2018.05.004

Abstract

Abstract: The thermal mixed lubrication model of finite-length line contacts is established, which takes account of the elasto-plastic deformation of the asperities and boundary-film tribo-chemistry properties.The model is verified by comparing the infinite-length theoretical model, the elastohydrodynamic lubrication (EHL) test rig and double-disk experimental data.Then the effect of surface roughness and the lubricant properties on the lubrication and friction are preliminarily discussed. The results show that reducing the surfuce roughness can effectively improve the scuffing resistance under the current operating conditions.

Key words: finite-length line contact; mixed lubrication; boundary film; elasto-plastic deformation

CLC Number:

TH 117.2

WANG Zhijian,CHEN Xiaoyang,SHEN Xuejin. A Mixed EHL Model of Finite-Length Line Contact Considering Asperity Elasto-Plastic Deformation and the Lubricant Properties[J]. Journal of Shanghai Jiao Tong University, 2018, 52(5): 525-532.

References

［1］JOHNSON K L, GREENWOOD J A, POON S Y. A simple theory of asperity contact in elasto-hydrodynamic lubrication［J］. Wear, 1972, 19(1): 91-108. ［2］GREENWOOD J A, WILLIAMSON J B P. Contact of nominally flat surfaces［J］. Proceedings of the Royal Society A, 1966, 295(1442): 300-319. ［3］PATIR N, CHENG H S. An average flow model for determining effects of three-dimensional roughness on partial hydrodynamic lubrication［J］. Journal of Lubrication Technology, 1978, 100(1): 12-17. ［4］ZHAO Y, MAIETTA D M, CHANG L. An asperity micro-contact model incorporating the transition from elastic deformation to fully plastic flow［J］. Journal of Tribology, 2000, 122(1): 86-93. ［5］MASJEDI M, KHONSARI M M. Film thickness and asperity load formulas for line-contact elasto-hydrodynamic lubrication with provision for surface roughness［J］. Journal of Tribology, 2012, 134(1): 011503-1-10. ［6］BOWDEN F P, TABOR D, PALMER F. The friction and lubrication of solids［M］. Oxford: Clarendon Press, 1954. ［7］ROELANDS C J A. Correlation aspects of the viscosity-temperature-pressure relationship of lubricating oils［D］. Delft, Netherlands: Technische Hogeschool Delft, 1966. ［8］DOWSON D, HIGGINSON G R. Elasto-hydrodynamic lubrication［M］. Oxford: Pergamon Press, 1977. ［9］MCCOOL J I. Relating profile instrument measurements to the functional performance of rough surfaces［J］. Journal of Tribology, 1987, 109(2): 264-270. ［10］HIRST W, HOLLANDER A E. Surface finish and damage in sliding［J］. Proceedings of the Royal Society A, 1974, 337(1610): 379-394. ［11］CHANG L, JENG Y R. A mathematical model for the mixed lubrication of non-conformable contacts with asperity friction, plastic deformation, flash temperature, and tribo-chemistry［J］. Journal of Tribology, 2014, 136(2): 022301-1-9. ［12］TIAN X F, KENNEDY F E. Maximum and average flash temperatures in sliding contacts［J］. Journal of Tribology, 1994, 116(1): 167-174. ［13］CHIPPA S P, SARANGI M. Study of surface roughness effects in elastohydrodynamic lubrication of a finite line contact using probabilistic model［C］∥Proceedings of the 1st International and 16th National Conference on Machines and Mechanisms. Roorkee, India: Indian Institute of Technology, 2013: 857-863. ［14］JACKSON A, WEBSTER M N, ENTHOVEN J C. The effect of lubricant traction on scuffing［J］. Tribology Transactions, 1994, 37(2): 387-395.

[1]	JIANG Huasheng1，2，PENG Xudong1，MENG Xiangkai1，SHEN Mingxue1. Numerical Analysis of Reverse Pumping Rate of Rotary Lip Seal by Finite Element Method [J]. Journal of Shanghai Jiaotong University, 2014, 48(08): 1194-1199.
[2]	YANG Xiao,PENG Xudong,MENG Xiangkai,WANG Yuming. Mechanical Seal Performance of Rough Surface Influenced by Tilt [J]. Journal of Shanghai Jiao Tong University, 2017, 51(6): 748-755.
[3]	NING Lipu1,NING Xin2,MENG Xianghui3. Piston Skirt Mixed Lubrication Analysis Considering the Effects of Lubricant Shear-Thinning [J]. Journal of Shanghai Jiao Tong University, 2018, 52(5): 511-517.
[4]	LIU Jun,ZHANG Zhinan,XIE Youbai. Effect of Low Viscosity Oil and Surface Texture on Friction Characteristics of Piston Ring-Liner [J]. Journal of Shanghai Jiao Tong University, 2018, 52(5): 505-510.
[5]	ZANG Shuyan,GUO Feng,LI Chao,LI Xinming. Characteristics of Lubrication Film in Slider-on-Disc Contact Under Limited Lubricant Supply [J]. Journal of Shanghai Jiao Tong University, 2018, 52(5): 533-537.
[6]	WU Xingyang,GE Zhou,RUAN Jingjie,YANG Yi,NIU Haozhi,CHEN Teng,ZHANG Jianhua. Edge-Profiling Effect on the Tribological Properties of Protrusion Textured N-Si-DLC Films in Air [J]. Journal of Shanghai Jiao Tong University, 2018, 52(5): 554-560.
[7]	LI Xingliang1,2,YUE Wen1,3,PANG Changtao2,XU Changyu2,KANG Jiajie1,3,TIAN Bin1,4. Effect of Tribological Behavior of Nitriding Treatment on the Texturing Titanium Surface in Lunar Soil [J]. Journal of Shanghai Jiao Tong University, 2018, 52(5): 561-567.

A Mixed EHL Model of Finite-Length Line Contact Considering Asperity Elasto-Plastic Deformation and the Lubricant Properties

PDF (PC)

Knowledge

Cited

Abstract

Cite this article

share this article

References

Related Articles 7

Recommended Articles

Metrics

Comments