Piston Skirt Mixed Lubrication Analysis Considering the Effects of
Lubricant Shear-Thinning

doi:10.16183/j.cnki.jsjtu.2018.05.002

Abstract

Abstract: A mixed lubrication of the piston skirt-liner system is presented, considering the effects of lubricant shear-thinning, to investigate the friction characteristics of the piston skirt for both monograde and multigrade lubricants, and the validity of the model and the effect of the lubricating oil shear-thinning are verified by the experiment. The results show that the multistage lubricating oil has a significant shear-thinning effect, and a decrease in the lubricant viscosity is an effective way to reduce the friction loss of piston skirt, although it may increase the boundary friction, especially at the expansion stroke. The effect of shear-thinning on the piston secondary motion is not obvious, and the measured value of the experiment is in good agreement with the predicted value of the mixed lubrication model.

Key words: engine, piston skirt, shear-thinning, mixed lubrication

CLC Number:

NING Lipu1,NING Xin2,MENG Xianghui3. Piston Skirt Mixed Lubrication Analysis Considering the Effects of Lubricant Shear-Thinning[J]. Journal of Shanghai Jiaotong University, 2018, 52(5): 511-517.

References

［1］WONG V W, TUNG S C. Overview of automotive engine friction and reduction trends-effects of surface, material, and lubricant-additive technologies［J］. Friction, 2016, 4 (1): 1-28. ［2］GANGOPADHYAY A. A review of automotive engine friction reduction opportunities through technologies related to tribology ［J］. Transactions of the Indian Institute of Metals, 2017, 70(2): 527-535. ［3］PATIR N, CHENG H S. Application of average flow model to lubrication between rough sliding surfaces［J］. Journal of Lubrication Technology, 1979, 100(1): 220-229. ［4］TAYLOR R I, KITAHARA T, SAITO T, et al. Piston assembly friction and wear: The influence of lubricant viscometry［C］∥Proceedings of the International Tribology Conference. Yokohama: ［s.n.］, 1995: 1423-1428. ［5］MA M T. Incorporation of lubricant shear-thinning in a two-dimensional lubrication analysis for automotive piston-ring packs ［EB/OL］. ［2017-10-20］. https:∥saemobilus.sae.org/content/2000-01-1786. ［6］GU C X, MENG X H, ZHANG D, et al. Transient analysis of the textured journal bearing operating with the piezoviscous and shear-thinning fluids［J］. Journal of Tribology, 2017, 139(5): 051708-1-20. ［7］ZHU D, CHENG H S, ARAI T, et al. A numerical analysis for piston skirt in mixed lubrication. Part I: Basic modeling［J］. ASME Journal of Tribology, 1992, 114(3): 553-562. ［8］宁李谱. 内燃机活塞-缸套系统低摩擦技术应用及摩擦力测量方法研究［D］. 上海: 上海交通大学机械与动力工程学院, 2014. NING Lipu. Piston-liner system low friction tech-nology applications of internal combustion engine and research on friction force measurement method［D］. Shanghai: School of Mechanical Engineering, Shanghai Jiao Tong University, 2014. ［9］张执南, 谢友柏. 考虑连杆-曲轴变惯性影响的活塞二阶运动分析［J］. 上海交通大学学报, 2010, 44(4): 555-559. ZHANG Zhinan, XIE Youbai. Effects of connecting rod-crankshaft variable inertia on piston secondary motion［J］. Journal of Shanghai Jiao Tong University, 2010, 44(4): 555-559. ［10］孙军, 刘广胜, 苗恩铭, 等. 内燃机活塞裙部-缸套间润滑油输送状况［J］. 机械工程学报, 2016, 52(22): 138-145. SUN Jun, LIU Guangsheng, MIAO Enming, et al. Transport of lubricating oil between piston skirt and cylinder liner for internal combustion engine［J］. Journal of Mechanical Engineering, 2016, 52(22): 138-145. ［11］MENG X H, FANG C C, XIE Y B. Transient tribodynamic model of piston skirt-liner systems with variable speed effects［J］. Tribology International, 2016, 94: 640-651. ［12］宁李谱, 孟祥慧, 谢友柏. 基于无线传输的内燃机活塞组-缸套摩擦力测量方法［J］. 上海交通大学学报, 2014, 48(9): 1297-1302. NING Lipu, MENG Xianghui, XIE Youbai. Measurement method for piston assembly-cylinder friction force based on wireless transmission in an internal combustion engine［J］. Journal of Shanghai Jiao Tong University, 2014, 48(9): 1297-1302.

[1]	WANG Kai∗ (汪凯), WANG Xianliang (王宪良), ZHU Jiazan (朱加赞), OU Daisong (欧代松), PAN Daifeng (潘代锋). System Life and Reliability Modeling of a Multiple Power Takeoffs Accessory Gearbox Transmission [J]. J Shanghai Jiaotong Univ Sci, 2022, 27(6): 855-866.
[2]	WANG Ziyao, GUO Fengxiang, CHEN Li. Engine Emission Prediction Based on Extrapolated Gaussian Process Regression Method [J]. Journal of Shanghai Jiao Tong University, 2022, 56(5): 604-610.
[3]	LI Zeyao, ZHOU Jie, TIAN Wanjun, PEI Wansheng. Accumulative Plastic Deformation of Saturated Soft Clay Under Variable Frequency Cyclic Loading for Subway [J]. Journal of Shanghai Jiao Tong University, 2022, 56(4): 454-463.
[4]	DENG Chen, KONG Yinan, WANG Qing, CHEN Gong. Research on Empirical Engineering Correction Algorithm Integrating Physical Laws [J]. Air & Space Defense, 2022, 5(3): 73-79.
[5]	XU Tianyi (徐天意), XIA Ming (夏明), JIANG Hong (姜虹). Advances in Medicine-Engineering Crossover in Automated Anesthesia [J]. J Shanghai Jiaotong Univ Sci, 2022, 27(2): 137-143.
[6]	HUA Fangfang, YAN Guozheng, WANG Lichao, CHAI Chuanye, XIAO Dunxi. Transcutaneous Wireless Energy Transmission of Biaxial Actuated Artificial Anal Sphincter [J]. Journal of Shanghai Jiao Tong University, 2022, 56(11): 1502-1508.
[7]	YIN Yankun, YI Difei. Engineering Criticality Assessment of Key Joint for Hull Structure of Semi-Submersible Floating Production Unit [J]. Ocean Engineering Equipment and Technology, 2022, 9(1): 52-57.
[8]	DING Xianting. What Is Functioning Machinery of SingleCell Organism? [J]. Journal of Shanghai Jiao Tong University, 2021, 55(Sup.1): 14-15.
[9]	LIU Hailong. Can Humans Control Climate? [J]. Journal of Shanghai Jiao Tong University, 2021, 55(Sup.1): 74-75.
[10]	ZHANG Hengrui. Demand-Driven Materials Design [J]. Journal of Shanghai Jiao Tong University, 2021, 55(Sup.1): 93-94.
[11]	DUAN Yiling, LIU Zuolin, LIN Shangchao. Can Solid-State Thermoelectric Generators Acquire Efficiency of Carnot Engines? [J]. Journal of Shanghai Jiao Tong University, 2021, 55(Sup.1): 112-115.
[12]	ZHANG Chenya, KOU Yufeng, LÜ Haining, XIAO Longfei, LIU Mingyue. Comparative Test of Characteristics of Vortex-Induced Motion and Galloping of Classic Spar Platform [J]. Journal of Shanghai Jiao Tong University, 2021, 55(5): 497-504.
[13]	SUN Binbin (孙彬彬), HAN Yu (韩煜), JIANG Wenbo (姜闻博), DAI Kerong(戴尅戎). 3D Printing Bioink Preparation and Application in Cartilage Tissue Reconstruction in Vitro [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(3): 267-271.
[14]	WANG Wenhao, (王文豪), DENG Qian(邓迁), LI Tao (李涛), LIU Yuehua (刘月华), LIU Yang (刘洋), SUN Yeye (孙叶叶), DENG Changxu (邓昌旭), ZHOU Xiaojun (周小军), MA Zhenjiang (马振江), QIANG Lei (强磊), WANG Jinwu, (王金武), DAI Kerong, (戴尅戎). Research Update on Bioreactors Used in Tissue Engineering [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(3): 272-283.
[15]	WANG Yunlong, JIANG Yunbo, GUAN Guan, XING Jiapeng, YU Guangliang. Design of Three-Dimensional Layout of Ship Engine Room Equipment Based on Knowledge Based Engineering [J]. Journal of Shanghai Jiao Tong University, 2021, 55(10): 1219-1227.

Piston Skirt Mixed Lubrication Analysis Considering the Effects of Lubricant Shear-Thinning

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles 0

Metrics

Comments