Dynamic Analysis of TwoLink Flexible Manipulators Based on
 the Absolute Nodal Coordinate Formulation

doi:10.16183/j.cnki.jsjtu.2017.10.002

Abstract

Abstract: A dynamic model of the flexible manipulator with variable crosssection is established based on the absolute nodal coordinate formulation. Variable boundary conditions of the link are described with some functions which are used as the upper and lower limits in the integrations to calculate mass matrix and stiffness matrix of the element. With these matrices the dynamic model of the manipulator is proposed by using the Newton equations. Manipulators with different materials and variable crosssections are employed in the numerical simulations. Results show that the increase of elastic modulus can improve the stiffness of structure and reduce its deformation. Kinematic accuracy of the structure can be improved by optimizing crosssection shape without changing its mass.

Key words: flexible link manipulator; variable crosssection; dynamic behavior; absolute nodal coordinate formulation (ANCF)

CLC Number:

TH 132

ZHAO Jun1,YU Haidong2. Dynamic Analysis of TwoLink Flexible Manipulators Based on
the Absolute Nodal Coordinate Formulation [J]. Journal of Shanghai Jiao Tong University, 2017, 51(10): 1160-1165.

References

［1］SHAKER M C, GHOSAL A. Nonlinear modeling of flexible manipulators using nondimensional variables［J］. Journal of Computational and Nonlinear Dynamics, 2006, 1（2）: 123134.
［2］DUBAY R, HASSAN M, LI C, et al. Finite element based model predictive control for active vibration suppression of a onelink flexible manipulator［J］. ISA Transactions, 2014, 53(5): 16091619.
［3］ZHANG X P, MILLS J K, CLEGHORN W L. Coupling characteristics of rigid body motion and elastic deformation of a 3PRR parallel manipulator with flexible links［J］. Multibody System Dynamics, 2009, 21(2): 167192.
［4］KHAIRUDIN M, MOHAMED Z, HUSAIN A R, et al. Dynamic characterisation of a twolink flexible manipulator: Theory and experiments［J］. Advances in Robotics Research, 2014, 1(1): 6179.
［5］YANG Z, ZHANG F B. Dynamics analysis of space robot manipulator with joint clearance［J］. Acta Astronautica, 2011, 68(7/8): 11471155.
［6］卢剑伟, 陈昊, 孙晓明, 等. 考虑减速机构间隙的机械臂动力学建模分析［J］. 机械工程学报, 2013, 49(15): 1521.
LU Jianwei, CHEN Hao, SUN Xiaoming, et al. Dynamic modeling and analysis of robot arm with consideration of clearance in gear reducer［J］. Journal of Mechanical Engineering, 2013, 49(15): 1521.
［7］NACHBAGAUER K, PECHSTEIN A S, IRSCHIK H, et al. A new lockingfree formulation for planar, shear deformable, linear and quadratic beam finite elements based on the absolute nodal coordinate formulation［J］. Multibody System Dynamics, 2011, 26(3): 245263.
［8］李彬，刘锦阳. 大变形柔性梁系统的绝对坐标方法型［J］.上海交通大学学报, 2005, 39(5): 827831.
LI Bin，LIU Jinyang. Application of absolute nodal coordination formulation in flexible beams with large deformation［J］. Journal of Shanghai Jiao Tong University, 2005, 39(5): 827831.
［9］赵春璋, 余海东, 王皓, 等. 基于绝对节点坐标法的变截面梁动力学建模与运动变形分析［J］. 机械工程学报, 2014, 50(17): 3845.
ZHAO Chunzhang, YU Haidong, WANG Hao, et al. Dynamic modeling and kinematic behavior of variable crosssection beam based on the absolute nodal coordinate formulation［J］. Journal of Mechanical Engineering, 2014, 50(17): 3845.
［10］NACHBAGAUER K, GRUBER P, GERSTMAYR J. Structural and continuum mechanics approaches for a 3D shear deformable ANCF beam finite element: Application to static and linearized dynamic examples［J］. Journal of Computational and Nonlinear Dynamics, 2013, 8(2): 92110.
［11］ZHAO C, YU H, LIN Z, et al. Dynamic model and behavior of viscoelastic beam based on the absolute nodal coordinate formulation［J］. Proceedings of the Institution of Mechanical Engineers. Part K: Journal of Multibody Dynamics, 2014, 229(1): 8496.
［12］刘铖，田强，胡海岩. 基于绝对节点坐标的多柔体系统动力学高效计算方法［J］. 力学学报, 2010, 42(6): 11971205.

[1]	ZHAO Ziren1, DU Shichang1, HUANG Delin1, REN Fei2, LIANG Xinguang2. Modelling and Bottleneck Analysis of Product Quality in Transient Phase#br# of MultiStage Manufacturing Systems Based on Markovian Chains [J]. Journal of Shanghai Jiao Tong University, 2017, 51(10): 1166-1173.
[2]	ZHOU Penghui, MA Hongzhan, CHEN Dongping, CHEN Mengyue, CHU Xuening. Identification of Product Redesign Modules Based on#br# Fuzzy Random Failure Mode and Effects Analysis [J]. Journal of Shanghai Jiao Tong University, 2017, 51(10): 1189-1195.
[3]	WANG Xing, ZHOU Yipeng, TIAN Yuanrong, CHEN You, ZHOU Dongqing, HE Jiyuan. Sparse Decomposition for Frequency Modulation Radar Signal Based on#br# Advanced Genetic Algorithm and SinChirplet Atom [J]. Journal of Shanghai Jiao Tong University, 2017, 51(9): 1124-1130.
[4]	LI Changxi1, 2, ZHOU Yan1, LIN Han3, LI Lingzhi1, GUO Ge1. TemporalSpatial Sequential Fusion Recognition Method of#br# Ballistic Missile Target Based on MIMOFNN Model [J]. Journal of Shanghai Jiao Tong University, 2017, 51(9): 1138-.
[5]	FENG Mingyue, HE Minghao, HAN Jun, YU Chunlai. High Resolution Direction of Arrival Estimation Based on#br# Covariance Fitting Estimation of Signal Parameters by#br# Rotational Invariance Technique Algorithm [J]. Journal of Shanghai Jiao Tong University, 2017, 51(9): 1145-.
[6]	?YANG Ping1,SHENG Jie1,WANG Yucheng2,LI Zhuyong1,JIN Zhijian1,HONG Zhiyong1. Quench Propagation Characteristics Influenced by NonUniform Properties of YBa2Cu3O7δ High Temperature Superconducting Tape [J]. Journal of Shanghai Jiaotong University, 2017, 51(9): 1090-1096.
[7]	XIA Hailiang1, 2, LIU Yakun1, 2, LIU Quanzhen3, LIU Baoquan3, FU Zhengcai1, 2. Metal Ablation Affected by Electrode Shapes Under#br# Long Continuing Lightning Current [J]. Journal of Shanghai Jiao Tong University, 2017, 51(8): 903-908.
[8]	ZHANG Liangjun1, 2, LI Xiaoci1, WU Jingyi1, CAI Aifeng1. ThermalStructure Coupling Analysis of #br# Microgravity Environment Simulation Suspension Structure for #br# Large Space Deployable Mechanisms [J]. Journal of Shanghai Jiao Tong University, 2017, 51(8): 954-961.
[9]	GU Jiayang, XIE Yulin, TAO Yanwu, HUANG Xianghong, WU Jie. Numerical Simulation and Experimental Study on VortexInduced#br# Motion of a New Type of Floating Drilling Production Storage Offloading [J]. Journal of Shanghai Jiao Tong University, 2017, 51(7): 878-885.
[10]	LIN Da, ZHU Yijia, WEI Xiaodong, WANG Zhiyu, ZHANG Wugao. Combustion and Particle Emission Characteristics Affected by#br# Fuel Supply Parameters for a Diesel Engine Fuelled with#br# Polyoxymethylene Dimethyl Ethers/Diesel [J]. Journal of Shanghai Jiao Tong University, 2017, 51(7): 787-795.
[11]	MENG Qingyang1, YAN Weiwu1, HU Yong1, CHENG Jianlin1, CHEN Shihe2, ZHANG Xi2. Model Identification Based on Subspace Model Identification of#br# Superheated Steam System in UltraSupercritical CoalFired Power Unit [J]. Journal of Shanghai Jiao Tong University, 2017, 51(6): 672-678.
[12]	JIANG Huajuna, CAI Yana, b, LI Chaohaoa, LI Fanga, b, HUA Xueminga, b. Recognition Method for Gas Pores on XRay Image of Lap Joints#br# Based on the Improved Sobel Algorithm [J]. Journal of Shanghai Jiao Tong University, 2017, 51(6): 665-671.
[13]	DONG Guanhua,YIN Qin,YIN Guofu,XIANG Zhaowei. Identification and Modeling of Coupling Dynamic Stiffness in Joints of Machine Tool [J]. Journal of Shanghai Jiaotong University, 2015, 49(09): 1263-1434.
[14]	XIE Qijiang,YU Haidong. Coupling Relationship Between Loads on Cutterhead of Tunnel Boring Machine and Contact Stiffness of Gripper Shoes and Rocks [J]. Journal of Shanghai Jiaotong University, 2015, 49(09): 1269-1275.
[15]	ZHONG Jianlin1,MA Dawei1,REN Jie1,LI Shijun2,WANG Xu3. Static Compression Analysis of Rubber Hollow Cylinder Based on Plane Strain Assumption [J]. Journal of Shanghai Jiaotong University, 2015, 49(09): 1276-1280.