Zero Wear of Internal Combustion Engine Sliding Bearing Based on Mixed Thermo-Elastohydrodynamic Lubrication

Abstract

Abstract:

Abstract： A zero wear model was established for the design of internal combustion engine sliding bearing, with the consideration of the lubrication model, the asperity contact model, the multibody dynamics model and the zero wear experiment criterion. The safety factor for zero wear was calculated to predict the reliability of wear. The zero wear model was applied to the main bearing design for a sixcylinder diesel engine. The results show that the distribution of zero wear safety factor can be predicted by using this method. This paper can provide theoretical guidance for zero wear design of bearing.

Key words: multibody dynamics, internal combustion engine, sliding bearing, zero wear, mixed thermoelastohydrodynamic lubrication

CLC Number:

TK 402

LIU Xiaori1,2,LI Ming1,ZHANG Tiechen1,ZHENG Qingping1,LI Su1,LI Guoxiang2. Zero Wear of Internal Combustion Engine Sliding Bearing Based on Mixed Thermo-Elastohydrodynamic Lubrication[J]. Journal of Shanghai Jiaotong University, 2017, 51(1): 62-.

References

［1］温诗铸，黄平. 摩擦学原理［M］. 4版. 北京：清华大学出版社，2012：329-330.
［2］BAYER R G, CLINTON W C, NELSON C W, et al. Engineering model for wear［J］. Wear, 1962, 5(5)：378-391.
［3］ARCHARD J F. Contact and rubbing of flat surfaces［J］. Journal of Applied Physics，1953，24(8)：981-988.
［4］MOSEY N J, MUSER M H, WOO T K. Molecular mechanisms for the functionality of lubricant additives［J］.Science,2005,307:1612-1615.
［5］ZHENG X, ZHU H T, TIEU A K, et al. A molecular dynamics simulation of 3D rough lubricated contact［J］. Tribology International,2013,67(27):217-221.
［6］ZHONG J, SHAKIBA R, ADAMS J B. Molecular dynamics simulation of severe adhesive wear on a rough aluminum substrate［J］. Journal of Physics D: Applied Physics,2013,46(5):55307-55316.
［7］OFFNER G. Modelling of condensed flexible bodies considering nonlinear inertia effects resulting from gross motions［J］. Proceedings of the Institution of Mechanical Engineers，Part K：Journal of MultiBody Dynamics，2011，225(3)：204-219.
［8］刘晓日，李国祥，胡玉平，等.考虑空穴和微观弹流润滑效应的连杆大头轴承热弹流混合润滑分析［J］.上海交通大学学报，2015,49(5)：626-632.
LIU Xiaori, LI Guoxiang, HU Yuping, et al. Mixed thermoelastohydrodynamic lubrication of connecting rod big end bearing considering cavitation and microelastohydrodynamic conditions［J］. Journal of Shanghai Jiao Tong University, 2015,49(5)：626-632.
［9］王刚志，郝延明，马维忍，等. 内燃机主轴承热弹性流体动力润滑研究［J］. 内燃机工程，2010，31(5)：63-68.
WANG Gangzhi, HAO Yanming, MA Weiren, et al. Thermoelastohydrodynamic lubrication research of main bearing in IC engines［J］. Chinese Internal Combustion Engine Engineering, 2010,31(5):63-68.
［10］ALLMAIER H，PRIESTNER C，REICH F M，et al. Predicting friction reliably and accurately in journal bearings—extending the EHD simulation model to TEHD［J］. Tribology International, 2013,58(4):20-28.
［11］BUKOVNIK S, OFFNER G, CAIKA V, et al. Thermoelastohydrodynamic lubrication model for journal bearing including shear ratedependent viscosity［J］. Lubrication Science, 2007, 19(4): 231-245.
［12］KANGO S, SHARMA R K, PANDEY R K. Thermal analysis of microtextured journal bearing using nonNewtonian rheology of lubricant and JFO boundary condition［J］. Tribology International, 2014,69(3):19-29.
［13］SHARMA N, KANGO S, TAYAL A, et al. Investigations on the influence of surface texturing on a couple stress fluid based journal bearing by using JFO boundary conditions［J］. Tribology Transactions, 2016, 59(3): 579-584.
［14］SLOETJES J W. Microelastohydrodynamic lubrication in concentrated sliding contacts［D］. The Netherlands：University of Twente, Enschede, 2006.
［15］GREENWOOD J A, TRIPP J H. The contact of two nominally flat rough surfaces［J］. Proceedings of the Institution of Mechanical Engineers，1970，185：625-633.
［16］HU Y Z, CHENG H S, ARAI T, et al. Numerical simulation of piston ring in mixed lubricationa nonaxisymmetrical analysis［J］. Journal of Tribology,1994,116(3):470-478.

[1]	KONG Chao, WANG Jun, CHEN Jianping, SHA Zhaoming. Launch Stability Analysis of a Missile Electromagnetic Ejection Device [J]. Air & Space Defense, 2019, 2(4): 65-68.
[2]	ZHAO Xiuliang,CHENG Yong,WANG Limei. Improvement of SNR of Vibration Response Signal Excited by In-Cylinder Pressure Using Pattern Recognition Method [J]. Journal of Shanghai Jiaotong University, 2015, 49(05): 637-643.
[3]	BAO Tang-tang (包堂堂), ZHOU Bo (周波), DENG Jun (邓俊), WU Zhi-jun* (吴志军). Research on the Physical Property of Diesel-Gasoline Blend Fuel [J]. Journal of shanghai Jiaotong University (Science), 2014, 19(6): 721-727.
[4]	LI Deli,CHEN Xiaoling,WU Jiao,QIN Ping,ZHANG Wugao. Experimental Study of NOx Storage/Reduction Performance of Perovskite Catalysts, with H2 as Reductant [J]. Journal of Shanghai Jiaotong University, 2013, 47(11): 1778-1782.
[5]	ZHANG Zhinan,XIE Youbai. Effects of Connecting RodCrankshaft Variable Inertia on Piston Secondary Motion [J]. Journal of Shanghai Jiaotong University, 2010, 44(04): 555-0559.