Simulation Analysis of VibroAcoustic Characteristics of Traditional Guzheng

Abstract

Abstract: Abstract： Based on the vibroacoustic principle, the simplified model of traditional Guzheng was proposed. A 3D finite element model (FEM) of the Guzheng structure was established to analyze the vibration frequency response with the force of the strings and bridge acting on the panel as the vibration condition. The acoustic FEM and its analysis were established with vibration frequency response as the acoustic boundary conditions, and the frequency response characteristics of radiated sound pressure were obtained. The results show that the simulation results of Guzheng vibration are consistent with the experiment while the peak frequency of the radiated sound pressure of Guzheng is consistent with the simulation results. The acoustic radiation efficiency between 350 and 550 Hz is higher than that before 350 Hz. The upward acoustic radiation of Guzheng vibration is stronger than the downward one.

Key words: Key words： traditional Guzheng, vibroacoustic, finite element model (FEM), structure design

CLC Number:

O 329
TB 532

DENG Xiaowei1，YU Zhengyue1，YAO Weiping1，CHEN Minjie2. Simulation Analysis of VibroAcoustic Characteristics of Traditional Guzheng [J]. Journal of Shanghai Jiaotong University, 2016, 50(02): 300-305.

References

［1］陈通，郑敏华，蔡秀兰．琵琶的声学特性［J］．声学学报，1995，20（1）：6065． CHEN Tong，ZHENG Minhua，CAI Xiulan．The acoustic characteristics of the pipa［J］．Chinese Journal of Acoustics，1995，20（1）：6065．［2］王仲林，樊文博．古筝的结构、原理及设计建模［J］．东华大学学报，2012，38（5）：564571． WANG Zhonglin，FAN Wenbo．The structure，principle and design modeling of Guzheng［J］．Journal of Donghua University，2012，38（5）：564571．［3］李云芳．扬琴弦振动的力学分析［J］．青岛理工大学学报，2008，29（3）：8486． LI Yunfang．Mechanical analysis of dulcimer chord vibration［J］．Journal of Qingdao Technological University，2008，29（3）：8486．［4］和江燕．20世纪中国民族乐器改进研究［D］．太原：山西大学音乐学院音乐系，2011．［5］范冉．当代古筝形制改革述评［D］．北京：中央音乐学院民乐系，2008．［6］SHORTER P J, LANGLEY R S. Vibroacoustic analysis of complex systems［J］．Journal of Sound and Vibration, 2005, 288(3)：669699．［7］VERGOTE K, VAN GENECHTEN B, VANDEPITTE D, et al．On the analysis of vibroacoustic systems in the midfrequency range using a hybrid deterministicstatistical approach［J］．Computers and Structures, 2011, 89(1112): 868877．［8］杨德庆，王德禹，刘洪林．舰艇振动声学特性数值分析［J］．上海交通大学学报，2002，36（11）：15371539，1543． YANG Deqing，WANG Deyu，LIU Honglin．Numerical analysis of vibroacoustic characters of ship［J］．Journal of Shanghai Jiaotong University，2002，36（11）：15371539，1543．［9］靳小雄，白胜勇．车声板件振动声学贡献的计算机模拟［J］．汽车工程，2000，22（4）：235239． JIN Xiaoxiong，BAI Shengyong．Computer simulation on acoustic contribution of vibrating body panels［J］．Automotive Engineering，2000，22（4）：235239．［10］增泽君，邵忍平．齿轮结构振动声学特性数值分析［J］．科学技术与工程，2007，7（12）：29502952． ZENG Zejun，SHAO Renping．Numerical analysis of vibroacoustic characters of gear structure［J］．Science Technology and Engineering，2007，7（12）：29502952．［11］王静．结构声学设计的可听化技术［D］．西安：西北工业大学航天学院，2004．［12］韩宝强．乐器声学系统与空间音乐声学［J］．演艺设备与科技，2007（2）：6468． HAN Baoqiang．Acoustics system of musical instruments and musical acoustics of space［J］．Entertainment Technology，2007(2)：6468．［13］李司单．民族乐器用木质泡桐面板振动特性与模态分析［D］．哈尔滨：东北林业大学材料系，2011．［14］OBATAYA E, ONO T, NORIMOTO M. Vibrational properties of wood along the grain［J］．Journal of Materials Science，2000，35：29933001．［15］徐有明．木材学［M］．北京：中国林业出版社，2006：182194．［16］王治国．工程声学有限元分析理论与应用［M］．北京：国防工业出版社，2007．［17］许肖梅．声学基础［M］．北京：科学出版社，2003．

[1]	KE Linda, ZHANG Xiaolong, CUI Zhe, GU Mingfeng, LAI Caifang, LIU Yong. Review of Missile Structural Optimization Design for Additive Manufacturing [J]. Air & Space Defense, 2023, 6(2): 28-34.
[2]	LI Yulin, AN Qingsheng, YANG Kunhao, TANG Xiaofeng, LIU Longtao. Analysis and Validation of Integrated Thermal Protection and Load Bearing for Composite Material Cable Cover [J]. Air & Space Defense, 2019, 2(3): 1-7.
[3]	WANG Kuo, ZHANG Shuai, QIN Jiang, LIU Lei, XU Xin-gang, GUAN Hong-sen. Design and Practice of LNG Module Tertiary Structure in Arctic Region [J]. Ocean Engineering Equipment and Technology, 2018, 5(增刊): 87-92.
[4]	ZHANG Dongming1 (张东明), ZHANG Xiaoyun1* (张晓云), YANG Zhichun1 (杨智淳), YU Junwei2 (俞俊威). Design of Car Battery Protection Device Based on Torsion Spring [J]. Journal of shanghai Jiaotong University (Science), 2017, 22(5): 517-522.
[5]	Wang H.; Liu Y.; Chen Z.; Wan M.; Nie H.. Investigation of the capabilities of yield functions on describing the deformation behavior of 5754O aluminum alloy sheet under combined loading paths [J]. J Shanghai Jiaotong Univ Sci, 2016, 21(5): 562-568.
[6]	WANG Chunxiao,LI Xiang,LUO Yun. Design and Strength Analysis of Porous Titanium Scaffold [J]. Journal of Shanghai Jiaotong University, 2016, 50(02): 165-168.
[7]	. Simulation and Optimal Design of High-Pressure-Differential and High-Solid-Phase Relief Valves [J]. Journal of Shanghai Jiaotong University, 2011, 45(11): 1597-1601.