Quality Analysis of Correlated MultiStage Manufacturing Systems Based on Markov Model

Abstract

Abstract:

Abstract： In manufacturing systems, the complex parts like astronautical valve are often processed through several correlated stages. It is absolutely of great importance to evaluate and analyze the quality of such correlated multistage systems. This paper, based on the Markov chain method and incorporating iteration, presented an analytical model to evaluate the quality of the correlated multistage system. The model took machine states as well as the quality of the incoming parts into consideration. It emphasized the quality propagation between adjacent stages, revealed the quality changes after each stage and proposed to improve the quality of the final product from the aspect of the parameters of the processing machine. The effectiveness of this model was validated by a case of multistage manufacturing system of astronauticalvalve used in a domestic rocket manufacturing company.
Key words：

Key words: multistage processing, Markov model, manufacturing system, quality control

CLC Number:

TH 161+.5

XU Rui1,DU Shichang1,REN Fei2,LIANG Xinguang2,LIU Weihong2. Quality Analysis of Correlated MultiStage Manufacturing Systems Based on Markov Model[J]. Journal of Shanghai Jiaotong University, 2015, 49(05): 669-674.

References

［1］Shi J, Zhou S. Quality control and improvement for multistage systems: a survey［J］. IIE Transactions, 2009, 41(9): 744753.

［2］AbellanNebot J V, Liu J, Subirón FR, et al. State space modeling of variation propagation in multistation machining processes considering machininginduced variations ［J］. Journal of Manufacturing Science and Engineering, 2012, 134(2): 021002102100213.

［3］杜世昌，奚立峰，潘尔顺. 多阶段制造系统中尺寸偏差建模与控制［J］. 上海交通大学学报，2006，40(4): 583587.

DU Shichang, XI Lifeng, PAN Ershun. Modeling and controlling of dimensional variation in multistage manufacturing system ［J］. Journal of Shanghai Jiaotong University, 2006, 40(4): 583587.

［4］杜世昌，王猛，奚立峰. 多工序加工系统产品尺寸误差传递建模［J］. 机械工程学报，2011,47(16)：143149.

DU Shichang, WANG Meng, XI Lifeng. Modeling of dimensional errors propagation in multistage machining system ［J］. Journal of Mechanical Engineering, 2011, 47(16): 143149.

［5］姚旭峰，杜世昌，王猛，等. 航天阀门多工序加工过程误差传递分析与建模［J］. 工业工程与管理，2014，19(1): 4351.

YAO Xufeng, DU Shichang, WANG Meng, et al. Variation transmission analysis and modeling in multistage machining process of astronautical valve ［J］. Industrial Engineering and Management, 2014, 19(1): 4351.

［6］Inman R R, Blumenfeld D E, Huang N, et al. Survey of recent advances on the interface between production system design and quality ［J］. IIE Transactions, 2013, 45(6): 557574.

［7］Inman R R, Blumenfeld D E, Huang N, et al. Designing production systems for quality: Research opportunities from an automotive industry perspective ［J］. International Journal of Production Research, 2010, 41(9): 19531971.

［8］Colledani M, Tolio T. Joint design of quality and production control in manufacturing systems ［J］. CIRP Journal of Manufacturing Science and Technology, 2011, 4(3): 281289.

［9］Li J S, Huang N J. Quality evaluation in flexible manufacturing systems:Amarkovian approach［J］. Mathematical Problems in Engineering, 2007: 5712824.

［10］Kim J, Gershwin S B. Analysis of long flow lines with quality and operational failures［J］. IIE Transaction, 2008, 40(3): 284296.

［11］Ju F, Li J, Xiao G, et al. Quality flow model in battery manufacturing systems for electric vehicles［J］. IEEE Transactions on Automation Science and Engineering, 2014, 11(1): 230244.

［12］Ju F, Li J, Xiao G, et al. Quality flow model in automotive paint shops ［J］. International Journal of Production Research, 2013, 51(21): 64706483.

［13］Wang J, Li J, Arinez J, et al. Quality analysis in flexible manufacturing systems with batch productions: Performance evaluation and nonmonotonicproperties［J］. IEEE Transactions on Automation Science and Engineering, 2010, 7(3): 671676.

［14］Wang J, Li J, Arinez J, et al. Quality bottleneck transitions in flexible manufacturing systems with batch productions ［J］. IIE Transactions, 2013, 45(2): 190205.

［15］郑立，江平宇，乔立红，等. 制造系统研究的挑战和前沿［J］. 机械工程学报, 2010, 40(21): 124136.

ZHENG Li, JIANG Pingyu, QIAO Lihong, et al. Challenges and frontiers of manufacturing systems ［J］. Journal of Mechanical Engineering, 2010,40(21):124136.

［16］左延红. 现代制造系统的研究现状及发展趋势［J］. 现代制造过程, 2014 (4): 132136.

ZUO Yanhong. The status and development trends of modern manufacturing system’s research［J］. Modern Manufacturing Engineering, 2014(4): 132136.

[1]	PANG Ce∗ (庞策), SHAN Ganlin (单甘霖). Game Theory Based Sensor Management in Reducing Target Threat Level Assessment Risk [J]. J Shanghai Jiaotong Univ Sci, 2022, 27(5): 649-659.
[2]	GAO Yingming, CHEN Zhen, ZHANG Xiufang, PAN Ershun. Reliability Modeling and Maintenance Optimization of Manufacturing System Based on Stochastic Flow Network and Markov Process [J]. Journal of Shanghai Jiao Tong University, 2021, 55(3): 229-235.
[3]	ZHU Mixin, GE Yaxiong, ZHOU Xiaojun. Preventive Maintenance Strategy for Multi-Stage Flexible Manufacturing System with Dynamic Production Planning [J]. Journal of Shanghai Jiaotong University, 2020, 54(11): 1124-1133.
[4]	LI Shaoyong* (李绍勇), WU Zongli (吴宗礼), LI Hailin (李海林), WEI Xianhong (魏先宏), CAI Ying (蔡颖), HOU Caiqin (厚彩琴). Control Algorithm Using a Revised MIP Method to Deal with Livelocks in S4R of Petri Nets [J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(2): 190-195.
[5]	CHEN Yong-gang, PANG Pei-rong, YANG Guang, HE Xin. Quality Control about the Subsea Manifold Piping System [J]. Ocean Engineering Equipment and Technology, 2018, 5(增刊): 136-139.
[6]	LI Yaping (李亚平), HUANG Mengdie (黄梦蝶), PAN Ershun (潘尔顺). Residual Chart with Hidden Markov Model to Monitoring the Auto-Correlated Processes [J]. Journal of Shanghai Jiao Tong University (Science), 2018, 23(Sup. 1): 103-108.
[7]	SONG Tingting1,ZHAO Ziren1,DU Shichang1,REN Fei2,LIANG Xinguang2. Quality Analysis of Multi-Stage Assembly Systems Based on Markov Model [J]. Journal of Shanghai Jiaotong University, 2018, 52(3): 324-331.
[8]	GAO Xiaoting,YANG Dongsheng. Research on Operation Condition Monitoring Method of Intellectual Apparatus Based on Data Driven [J]. Journal of Shanghai Jiaotong University, 2017, 51(9): 1104-1110.
[9]	ZHAO Ziren1,DU Shichang1,HUANG Delin1,REN Fei2,LIANG Xinguang2. Modelling and Bottleneck Analysis of Product Quality in Transient Phase of MultiStage Manufacturing Systems Based on Markovian Chains [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1166-1173.
[10]	LI Qing1,LIANG Steven Y1,2,YANG Jianguo1. Bearing Fault Pattern Recognition Using Harmonic Wavelet Sample Entropy and Hidden Markov Model [J]. Journal of Shanghai Jiaotong University, 2016, 50(05): 723-729.
[11]	MI Jin-hua1 (米金华), LI Yan-feng1* (李彦锋), HUANG Hong-zhong1 (黄洪钟),LI Ai-feng2 (李爱峰), WANG Xiao-ming2 (王晓明). Reliability Analysis of Excavator Rectifier Feedback System with Multi-State Components Based on Belief Universal Generating Function Method [J]. Journal of shanghai Jiaotong University (Science), 2015, 20(3): 344-348.
[12]	LI Cheng,LI Shuang,FENG Yiping,RONG Gang. Scheduling Flexible Manufacturing System Based on Timed Petri Net and Heuristic Search [J]. Journal of Shanghai Jiaotong University, 2015, 49(05): 708-713.
[13]	ZHANG Zhifeng1,2，DAVID Janet2. Measurement of States of Cellular Manufacturing Systems Based on Entropy Models [J]. Journal of Shanghai Jiaotong University, 2015, 49(01): 109-115.
[14]	SU Xian-li1,2 (苏先礼), ZHAN Xing-qun1* (战兴群), NIU Man-cang1 (牛满仓), ZHANG Yan-hua1 (张炎华). Receiver Autonomous Integrity Monitoring Availability and Fault Detection Capability Comparison Between BeiDou and GPS [J]. Journal of shanghai Jiaotong University (Science), 2014, 19(3): 313-324.
[15]	HONG Jiang-tao1,2* (洪江涛), CHEN Jun-fang2 (陈俊芳). Game Theory Analysis of Quality Control in Two-Echelon Supply Chain [J]. Journal of shanghai Jiaotong University (Science), 2013, 18(4): 508-512.