Effects of Refrigerant-Side Structure on Heat Transfer and Flow Performance of Multiple Micro-Channel Parallel Flow Condenser

Abstract

Abstract:

The theoretical model of the multiple micro-channel parallel flow condenser was established based on the method of distribution parameters, and the validity of the model was verified by comparison with the experimental data. Based on this model, the effects of flat tube inner hole numbers, proportion of height and width of the inner hole, flow paths arrangement, flat tubes distribution of different flow path on the heat transfer and flow performance of multiple micro-channel parallel flow condenser were investigated. The results show that, as the flat tube inner hole numbers increase, the heat transfer rate and air-side pressure drop increase, while the refrigerant-side pressure drop decreases; when the proportion of the height and width of the inner hole increases, the heat transfer rate and refrigerant-side pressure drop decrease, and the air-side pressure drop remains constant; as the flow paths number increases, the heat transfer rate and refrigerant-side pressure drop increase; when the flow paths number remains constant, the principle of flat tubes distribution is that the tube number in every flow path should be decreased in turn, the decreasing speed should be gradually slowed down, and the tube numbers in the subcooling section should not be too few.

Key words: multiple micro-channel, parallel flow condenser, heat transfer and flow performance, variable structure

CLC Number:

TB 657.5

FANG Jihua1，GU Bo1，TIAN Zhen1，ZHAO Pengcheng2. Effects of Refrigerant-Side Structure on Heat Transfer and Flow Performance of Multiple Micro-Channel Parallel Flow Condenser[J]. Journal of Shanghai Jiaotong University, 2014, 48(09): 1315-1322.

References

［1］Lee G H, Yoo J Y. Performance analysis and simulation of automobile air conditioning system ［J］. International Journal of Refrigeration, 2000, 23(3):243254.

［2］Sanaye S, Dehghandokht M. Modeling and multiobjective optimization of parallel flow condenser using evolutionary algorithm ［J］. Applied Energy, 2011, 88(5):15681577.

［3］Ye L, Tong M W, Zeng X. Design and analysis of multiple parallelpass condensers ［J］. International Journal of Refrigeration, 2009, 32(6):11531161.

［4］Chang Y J, Wang C C. A generalized heat transfer correlation for louver fin geometry［J］. International Journal of Heat and Mass Transfer，1997，40(3): 533544.

［5］Kim M H, Bullard C W. Airside thermal hydraulic performance of multilouvered fin aluminum heat exchanger［J］. International Journal of Refrigeration, 2002, 25(3):390400.

［6］包涛，陈蕴光，董玉军，等.多元平行流冷凝器传热流动性能研究［J］. 制冷学报，2005，26(3)：15.

BAO Tao, CHEN Yunguang, DONG Yujun, et al. Study on heat transfer and flow characteristics of a multiparallelflow type condenser［J］. Refrigeration Journal, 2005, 26(3):15.

［7］黄晓峰，曹小林，潘雯，等.多元平行流冷凝器的数值模拟研究［J］. 流体机械，2012,40（9）：7275.

HUANG Xiaofeng, CAO Xiaolin, PAN Wen, et al. Simulation study of a multiunit parallelflow condenser［J］. Fluid Machinery, 2012, 40(9):7275.

［8］邵世婷，王文.微型通道冷凝器数值模拟与分析［J］. 上海交通大学学报，2009，43（2）：251255.

SHAO Shiting, WANG Wen. Numerical simulation and analysis of microchannel condenser ［J］. Journal of Shanghai Jiaotong University, 2009, 43(2):251255.

［9］胡浩茫，陈焕新，王彦忠，等.基于两相流流型的平行流冷凝器整体仿真模型与实验验证［J］. 化工学报，2012,63（3）：806811.

HU Haomang, CHEN Huanxin, WANG Yanzhong, et al. Simulation model and experimental study on parallel flow condenser based on twophase flow regime ［J］. CIESC Journal, 2012, 63(3): 806811.

［10］舒朝辉，李从来，陈焕新，等.扁管结构对平行流冷凝器制冷剂侧性能的影响［J］. 化工学报，2008,59（S2）:129133.

SHU Zhaohui, LI Conglai, CHEN Huanxin, et al. Flat tube structure on refrigerantside performance of parallel type condenser ［J］. CIESC Journal, 2008, 59(S2): 129133.

［11］彭明，张雪平.不同流程布置的平行流式冷凝器实验研究［J］. 制冷与空调，2008，22（2）：15.

PENG Ming, ZHANG Xueping. Experimental investigation of parallelflow type condenser with various refrigerant circulation ［J］. Refrigeration and Air Conditioning, 2008, 22(2):15.

［12］吴业正.制冷原理及设备［M］. 西安：西安交通大学出版社，2010.

［13］Didi Ould M B, Kattan N, Thome J R. Prediction of twophase pressure gradients of refrigerants in horizontal tubes ［J］. International Journal of Refrigeration, 2002, 25(7): 935947.

［14］Yang C Y, Webb R L. Condensation of R12 in small hydraulic diameter extruded aluminum tubes with and without microfins［J］. International Journal of Heat Mass Transfer, 1996, 39(4): 791800.

［15］成剑，金听祥，郑祖义.平行流换热器换热性能影响因素的分析［J］. 家电科技，2009，265(1)：4950.

CHENG Jian, JIN Tingxiang, ZHENG Zuyi. Analysis on the effect factors for heat transfer performance of parallel heat exchanger ［J］. China Appliance Technology, 2009, 265(1):4950.第48卷第9期2014年9月上海交通大学学报JOURNAL OF SHANGHAI JIAO TONG UNIVERSITYVol.48 No.9Sep. 2014

[1]	HAO Liang, HUANG Yinghao, YAO Lixiu, CAI Yunze. An Adaptive Maneuvering Target Tracking Algorithm Based on Fuzzy Inference [J]. Journal of Shanghai Jiao Tong University, 2024, 58(4): 468-480.
[2]	HUANG Yinghao1,2 (黄颖浩), WU Yi3 (吴怡), YAO Lixiu2 (姚莉秀), CAI Yunze1,2∗ (蔡云泽). A Class of Distributed Variable Structure Multiple Model Algorithm Based on Posterior Information of Information Matrix [J]. J Shanghai Jiaotong Univ Sci, 2022, 27(5): 671-679.
[3]	LI Qianglin, ZENG Weijie, TIAN Zhen, GU Bo. Adaptability of Multi-Structure of Finned Tube Heat Exchanger Under Variable Operation Conditions Based on Back Propagation Neural Network [J]. Journal of Shanghai Jiaotong University, 2020, 54(7): 668-673.
[4]	ZANG Yuejin, LI Renjun, ZENG Liang. Research on Terminal Guidance Law for Space Kill Vehicle Based on Variable Structure [J]. Air & Space Defense, 2019, 2(1): 37-41.
[5]	Zang Yuejin, Li Renjun, An Guochen. Research on Variable Structure Terminal Guidance Law for Exoatmospheric Anti-TBM Interceptor [J]. Air & Space Defense, 2018, 1(2): 22-26.
[6]	ZHANG Ping1,GU Bo1，WANG Ting1,ZHAO Pengcheng2,MA Hongtao2. Theoretical Model and Experimental Research on Multiple Micro-channel Parallel Flow Condenser [J]. Journal of Shanghai Jiaotong University, 2013, 47(11): 1738-1744.
[7]	WANG Neng-Jian, ZHOU Li-Jie, LIU Hong-Bo. Study on Stability Control for Tractor-Helicopter System on Deck [J]. Journal of Shanghai Jiaotong University, 2012, 46(07): 1146-1152.
[8]	DUAN Chao-Yang, ZHANG Yan, SHAO Lei, LEI Hu-Min, CHEN Zong-Ji. Sliding Mode Variable Structure Control Based on Multimodel Online Identification [J]. Journal of Shanghai Jiaotong University, 2011, 45(03): 403-407.
[9]	LIU Xiao-Dong, WU Yun-Jie, TIAN Da-Peng, WANG Jun-Feng. Research of Sliding Mode Controller for Flight Simulator Based on Disturbance Observer [J]. Journal of Shanghai Jiaotong University, 2011, 45(03): 393-397.