Controlling Method for Edge Wave in Flexible Roll Forming

Abstract

Abstract:

A novel flexible roll forming method, which is a complex process of repetitive loading, was proposed for manufacturing large curved and thinwalled metal plates. Edge wave is one of the significant defects in flexible roll forming due to its complex forming variables. A finite element model was established to analyze the effect of main forming variables, such as forming path, the number of forming stations and the distance between stations, on edge wave in flexible roll forming. The simulation results show that forming path has a great influence on edge wave. The increase of the number of roll stations and the distance between roll stations could result in reducing edge wave.

Key words: roll forming, edge wave, forming path, controlling

CLC Number:

TG 335

WANG Zhenxiao,ZHAO Yixi,KONG Qingshuai,YU Zhongqi. Controlling Method for Edge Wave in Flexible Roll Forming[J]. Journal of Shanghai Jiaotong University, 2014, 48(05): 624-628.

References

［1］李明哲，胡志清，蔡中义，等. 自由曲面工件的连续高效塑性成形方法［J］. 吉林大学学报（工学版）, 2007, 37(3): 489494.

LI Mingzhe, HU Zhiqing, CAI Zhongyi, et al. Method of efficient continuous plastic forming freeform surface part ［J］. Journal of Jilin University (Engineering and Technology Edition), 2007, 37(3): 489494.

［2］Cai Z Y, Li M Z, Lan Y W. Threedimensional sheet metal continuous forming process based on flexible roll bending: Principle and experiments ［J］. Journal of Materials Processing Technology, 2012, 212 (1): 120127.

［3］Yoon S J, Yang D Y. An incremental roll forming process for manufacturing doubly curved sheets from general quadrilateral sheet blanks with enhanced process features ［J］. CIRP AnnalsManufacturing Technology, 2005, 54(1): 221224.

［4］Shim D S, Yang D Y, Kim K H, et al. Numerical and experimental investigation into cold incremental rolling of doubly curved plates for process design of a new LARS (line array roll set) rolling process ［J］. CIRP AnnalsManufacturing Technology, 2009, 58(1): 239242.

［5］Shim D S, Yang D Y, Kim K H, et al. Investigation into forming sequences for the incremental forming of doubly curved plates using the line array roll set (LARS) process ［J］. International Journal of Machine Tools and Manufacture, 2010, 50：214218.

［6］Kong Q S, Yu Z Q, Lai X M, et al. Flexible roll forming with staggered arranged rollers for the large curved metal plates based on numerical simulation ［C］ // The 11th International Conference on Numerical Methods in Industrial Forming Process. Shenyang: AIP Publishing LLC, 2013: 689694.

［7］Tehrani M S, Hartley P, Naeini H M, et al. Localised edge buckling in cold roll forming of symmetric channel section ［J］. Thin Walled Structures, 2006, 44(2): 184196.

［8］罗晓亮，曾国，李淑慧，等. 材料参数对高强钢辊弯成形边波影响的有限元分析［J］. 上海交通大学学报，2008, 42(5): 744747.

LUO Xiaoliang, ZENG Guo, LI Shuhui, et al. Finite element analysis of the effect of material properties on wavy flange in high strength steel roll forming ［J］. Journal of Shanghai Jiaotong University, 2008, 42(5): 744747.

［9］Han Z W, Liu C, Lu W P, et al. The effects of forming parameters in the rollforming channel section with an outer edge ［J］. Jounal of Materials Processing Technology, 2001, 116(23): 205210.

［10］Nishioka F, Nishimaki K, Matsuishi M, et al. On automatic bending of plates by the universal press with multiple piston heads (first report): Fundamental study)［J］. Journal of the Society of Naval Architects of Japan, 1972, 132: 481501.

［11］钱直睿. 多点成形中的几种关键工艺及其数值模拟研究［D］. 长春：吉林大学材料科学与工程学院，2007.

[1]	ZHANG Qiang, CHEN Zhenhua, WANG Wenlong, SU Huaiwei, CHI Dejian. Numerical Simulation Study on Damage Characteristics of Reinforced Concrete T-Beam Bridge Under Blast Point Control [J]. Air & Space Defense, 2025, 8(5): 83-90.
[2]	PENG Zhigang,OUYANG Hua,WU Yadong,TIAN Jie. Discrete Noise Control of Automobile Cooling Fan by Combining Rotor and Stator Phase Modulation Principle [J]. Journal of Shanghai Jiaotong University, 2019, 53(4): 396-404.
[3]	XU Tangyun1,YANG Dongwei2,ZHANG Yilun3,LIU Ran3,JIANG Zhibin3. A TimeofUse Tariff Setting Strategy Based on Controlling Parameters and Feedback Regulation [J]. Journal of Shanghai Jiao Tong University, 2017, 51(2): 251-.
[4]	YAN Yu,WANG Haibo,ZHAO Wei. Establishment of Strain Rate Dependent Constitutive Model for Roll Forming Process [J]. Journal of Shanghai Jiaotong University, 2015, 49(01): 7-11.
[5]	CHEN Xia,ZHANG Jing，XU Guangyan. Three-Dimension Path Planning for Unmanned Aerial Vehicle Under Moving Threat [J]. Journal of Shanghai Jiaotong University, 2014, 48(10): 1400-1405.
[6]	SHAN Tiebing,YANG Jianmin,LI Xin,XIAO Longfei. Current Effects on Wave Run-Up Characteristics Around Column [J]. Journal of Shanghai Jiaotong University, 2014, 48(1): 116-124.
[7]	CHAO Can1,ZHAO Yixi1,KANG Wen1,YAN Peijie2,MA Yuefeng2. Strain Hardening Effect of QSTE700 Cold-Formed High Strength Steel Square Tube [J]. Journal of Shanghai Jiaotong University, 2014, 48(05): 605-609.
[8]	YAN Yu1 (阎昱), WANG Hai-bo1* (王海波), WAN Min2 (万敏). Forming Path Optimization for Press Bending of Aluminum Alloy Aircraft Integral Panel [J]. Journal of shanghai Jiaotong University (Science), 2012, 17(5): 635-642.
[9]	SHEN Wei. Risk Controlling Technology of Super Deep Excavation in Urban Metro Hub Construction [J]. Journal of Shanghai Jiaotong University, 2012, 46(07): 1168-1172.
[10]	WANG Zhuo-a, FENG Xiao-Ning-b, WAN Lei-a, PANG Yong-Jie-a. A Framework of Collaborative Simulation for Autonomous Underwater Vehicles [J]. Journal of Shanghai Jiaotong University, 2012, 46(04): 613-619.
[11]	WEI Changhe1,2，WANG Zhong1，LIANG Lei1，XU Guangju1 . Dynamic Torque Coordination Control Strategy of Integrated Starter Alternator Damper (ISAD) Hybrid [J]. Journal of Shanghai Jiaotong University, 2010, 44(10): 1356-1361.