Dynamic Similarity Analysis and Experimental Verification on a Quayside Container Crane

Abstract

Abstract: Based on the dynamic similitude theory, a detailed deduction process on the similarity scale factors between the prototype and 1∶50 scale model was presented. A hammering modal test and a series of seismic shaking table tests were successively carried out to obtain the dynamic characteristics and the seismic responses of this 1∶50 scale model. Meanwhile, the corresponding dynamic behaviors of the prototype were also systematically analyzed by the use of the ANSYS software. The investigation results indicate that the 1∶50 scale model can accurately predict the dynamic performances and seismic responses of the prototype with small error and can provide a reliable testing model for the following studies.

Key words: quayside container crane, dynamic similitude theory, shaking table tests, earthquake action, finite element analysis

CLC Number:

JIN Yu-Long, WU Tian-Xing. Dynamic Similarity Analysis and Experimental Verification on a Quayside Container Crane [J]. Journal of Shanghai Jiaotong University, 2012, 46(10): 1609-1615.

References

［1］金玉龙, 吴天行, 李增光. 基于极限状态法的岸桥结构抗震可靠性分析［J］. 振动与冲击, 2009, 28(12): 180186.
JIN Yulong, WU Tianxing, LI Zengguang. Analysis on antiseismic reliability of a container crane based on the limited state method ［J］. Journal of Vibration and Shock, 2009, 28(12): 180186.
［2］Viot P, Balle’re L, Guillaumat L, et al. Scale effects on the response of composite structures under impact loading ［J］. Engineering Fracture Mechanics, 2008, 75(9): 27252736.
［3］Zhu W D, Teppo L J. Design and analysis of a scaled model of a highrise, highspeed elevator ［J］. Journal of Sound and Vibration, 2003, 264(3): 707731.
［4］Kima N S, Lee J H, Chang S P. Equivalent multiphase similitude law for pseudodynamic test on small scale reinforced concrete models ［J］. Engineering Structures, 2009, 31(4): 834846.
［5］刘鸿文. 材料力学［M］. 4版.北京：高等教育出版社，2004: 140142.
［6］Wu J J. Finite element analysis and vibration testing of a threedimensional crane structure ［J］. Measurement, 2006, 39(8): 740749.
［7］郑海霞, 张淑珍, 杨萍, 等. 基于ANSYS 水轮机修复专用机器人模态分析［J］. 上海交通大学学报, 2008, 42(Sup.): 155157.
ZHENG Haixia, ZHANG Shuzhen, YANG Ping， et al. Modal analysis of special robot hydraulic turbine repair based on ANSYS［J］. Journal of Shanghai Jiaotong University, 2008, 42(Sup.): 155157.
［8］Jacobs L D, DesRoches R, Leon R T. Shake table testing of container cranes ［C］∥Proceedings of the 14th World Conference on Earthquake engineering. Beijing: China Seismological Press, 2008: 1217.
［9］Ghaemmaghami A R, Ghaemian M. Experimental seismic investigation of Sefidrud concrete buttress dam model on shaking table ［J］. Earthquake Engineering and Structural Dynamic, 2008, 37(5): 809823.
［10］JTJ 22598, 水运工程抗震设计规范［S］.

[1]	FENG Pengfei, ZHOU Mi, LI Zhixuan, ZHU Guoqiang. Probability Statistical Model for Measured Ground Motion Based on Generalized Extreme Value Distribution [J]. Journal of Shanghai Jiao Tong University, 2025, 59(8): 1133-1144.
[2]	MAO Liang, SHOU Jianlin, LIU Xuchen. Analysis of the Influence of Vibration-Blocking Mass on Vibration Transmission Performance of Marine Auxiliary Machinery [J]. Ocean Engineering Equipment and Technology, 2025, 12(3): 128-131.
[3]	LIU Yixiang, LI Peng, LIU Jiannan, WANG Kun, SHI Hemu. Finite Element Analysis and Monitoring Scheme Design for the MCM of a Submerged Turret Production Single-Point Mooring System [J]. Ocean Engineering Equipment and Technology, 2025, 12(2): 120-126.
[4]	HUANG Zhidi, GAO Jianxiong, MENG Lingchao, CHENG Qin, LI Miaomiao. Prediction of Tensile Strength of Open-Cell Composite Laminates Considering Stress Relief Effects [J]. Journal of Shanghai Jiao Tong University, 2025, 59(12): 1929-1941.
[5]	XU Yang, XIAO Qian, JIA Hongjie, JIN Yu, MU Yunfei, LU Wenbiao. Junction Temperature Algorithm of IGBT for Interface Converter in Optical Storage Microgrid System Considering Three-Dimensional Transverse Heat Conduction [J]. Journal of Shanghai Jiao Tong University, 2025, 59(10): 1533-1545.
[6]	YE Peng (叶鹏), FU Rongchang^∗ (富荣昌), WANG Zhaoyao (王召耀). Adjacent Segment Biomechanical Changes After Implantation of Cage Plus Plate or Zero-Profile Device in Different Segmental Anterior Cervical Discectomy and Fusion [J]. J Shanghai Jiaotong Univ Sci, 2025, 30(1): 166-174.
[7]	YE Junxian (叶俊贤), HUANG Weixuan (黄维璇), LI Siping (李四平). Natural Vibration Characteristics for Prestressed Concrete-Filled Rectangular Steel Tube Simply Supported Beam [J]. J Shanghai Jiaotong Univ Sci, 2024, 29(5): 940-944.
[8]	NIE Dongqing^1∗ (聂东清), ZHAI Zhiyang¹ (翟之阳), ZHANG Wei¹ (张威), LI Zhi² (李志). Finite Element Analysis of Effects of Improvement of Soil Between Double-Row Piles [J]. J Shanghai Jiaotong Univ Sci, 2024, 29(5): 919-929.
[9]	XU Rongxia, GAO Jianxiong, ZHU Pengnian, WU Zhifeng. A Fatigue Life Prediction Method for Fiber-Reinforced Composite Laminates [J]. Journal of Shanghai Jiao Tong University, 2024, 58(3): 400-410.
[10]	CHEN Yi, JIANG Zhe, ZHANG Jinfei, LUO Gaosheng, WANG Huanhuan, CHEN Zhaohui. Structural Finite Element Analysis Study of Underwater Automatic Matress Release System for Oil and Gas Pipeline Protection Structures [J]. Ocean Engineering Equipment and Technology, 2024, 11(1): 82-89.
[11]	XU Yuanjing, GAO Haifeng, WU Yuncheng, LIU Yihao, ZHANG Ziyan, HUANG Chenglan, WANG Zanbo, LIU Tongyou, WANG Caiping, MIAO Weiqiang, WANG Jinwu. Finite Element Analysis of Decompression Effect of Custom Additively Manufactured Knee Orthosis Compartments [J]. Journal of Shanghai Jiao Tong University, 2023, 57(5): 560-569.
[12]	LIU Yixun, LIU Zhihao, GAO Qinhe, HUANG Tong, MA Dong. Vertical Force Estimation of Heavy-Loaded Radial Tire Based on Circumferential Strain Analysis [J]. Journal of Shanghai Jiao Tong University, 2023, 57(10): 1273-1281.
[13]	JIA Mizhi, XU Liming, LIN Nan, NAN Bohua, WANG Kun, CAI Deng’an, ZHOU Guangming. Structural Design and Mechanical Properties of Fissile Cover with Rebound and Reset Functions [J]. Air & Space Defense, 2022, 5(2): 8-16.
[14]	PAN Shengxuan (潘晟轩), ZOU Diyang (邹第洋), PAN Xiaogang(潘晓岗), TSAI Tsung-Yuan (蔡宗远). Effect of Attachment on Movement Control of the Central Incisor Using Invisible Orthodontics: In-Silico Finite Element Analysis [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(3): 383-390.
[15]	FENG Qiping (冯齐平), CHU Fengting (储沨婷), CHEN Rongjing (陈荣敬), PAN Xiaogang (潘晓岗). Effects of Mandibular Extractions with Clear Aligners: A Finite Element Analysis [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(3): 377-382.