Geometrical Distortion Simulation Analysis of Data Matrix Code on Tool Cylinder

Abstract

Abstract: The theory and process of geometrical distortion of Data Matrix (DM) code on tool cylinder were analysed. And the distortion modeling and simulation of DM code image were induced based on the perspective projection. The result shows that the model can better simulate the distortion of DM code on the tool cylinder. Through simulation analysis, appropriate size of DM code marked on certain curvature tool cylinder and appropriate geometric parameters of camera in acquisition process were obtained.

Key words: tool cylinder, Data Matrix (DM) code, perspective projection, geometrical distortion, simulation

CLC Number:

TP 391.75

LI Xia-Shuang, HE Wei-Ping, LEI Lei, WANG Wei, LIN Qing-Song. Geometrical Distortion Simulation Analysis of Data Matrix Code on Tool Cylinder[J]. Journal of Shanghai Jiaotong University, 2012, 46(09): 1349-1354.

References

［1］王苏安, 何卫平, 张维, 等. 直接激光标刻和二维条码技术在刀具标识中的应用研究［J］. 中国机械工程, 2007, 18(6): 676680.
WANG Suan, HE Weiping, ZHANG Wei, et al. Application research on the direct laser marking and 2D barcode technology on tool marking and identification ［J］. China Mechanical Engineering, 2007, 18(6): 676680.

［2］王苏安，何卫平，张维，等. 刀具直接标刻与识别技术研究［J］ .计算机集成制造系统，2007，13(6): 11691174.
WANG Suan, HE Weiping, ZHANG Wei, et al. Direct tool marking and identification method［J］. Computer Integrated Manufacturing Systems, 2007, 13(6): 11691174.
［3］WANG Quandai, DUAN Yugang, DING Yucheng, et al. Mark image geometric distortion calibration in alignment system for multilevel imprint lithography ［J］. Optics and Precision Engineering, 2007, 15(3): 424427.
［4］张广军，尚鸿雁，魏振忠. 激光自准直测角中零位畸变模型及仿真［J］ . 机械工程学报, 2006, 42(5): 6468.
ZHANG Guangjun，SHANG Hongyan，WEI Zhenzhong. Distortion error model of the reference zero of laser autocollimation angel measurement and its simulation ［J］. Chinese Journal of Mechanical Engineering, 2006, 42(5): 6468.
［5］胡礼勇, 缪栋, 杨小冈. 景象匹配实时图模拟生成中几何畸变的建模与仿真［J］ . 导箭与制导学报, 2006, 26(2): 743749.
HU Liyong, MIAO Dong, YANG Xiaogang. Modeling and simulation of geometric distortion in realtime image synthesis for scene matching ［J］. Journal of Projectiles, Rockets, Missiles and Guidance, 2006, 26(2): 743749.
［6］Liang Yinghong, Wang Zhiyan, Cao Xiaoye, et al. Real time recognition of 2D bar codes in complex image conditions ［C］ // Proceedings of the Sixth International Conference on Machine Learning and Cybernetics. Tokyo, Japan: IEEE Press, 2007: 16991704.
［7］Ohbuchi E, Hanaizumi H, Hock L A. Barcode readers using the camera device in mobile phones ［C］ // Proceedings of the 2004 International Conference Cyberworlds. Hong Kong, China: IEEE Press, 2004: 260265.
［8］徐长青，许志闻，郭晓新. 计算机图形学［M］. 2版. 北京：机械工业出版社, 2010: 2060.

[1]	DING Enbao, CHANG Shengming, SUN Cong, ZHAO Leiming, WU Hao. Hydrodynamic Characteristics of a Surface Piercing Propeller Entering Water with Different Radiuses [J]. Journal of Shanghai Jiao Tong University, 2022, 56(9): 1188-1198.
[2]	WU Huaina, FENG Donglin, LIU Yuan, LAN Ganzhou, CHEN Renpeng. Anti-Uplift Portal Frame in Control of Underlying Tunnel Deformation Induced by Foundation Pit Excavation [J]. Journal of Shanghai Jiao Tong University, 2022, 56(9): 1227-1237.
[3]	WANG Xiaoliang, YAO Xiaosong, GAO Shuang, LIU Guohua. Aerodynamic Drag Characteristics of Ultra-Low Orbit Satellites [J]. Journal of Shanghai Jiao Tong University, 2022, 56(8): 1089-1100.
[4]	LIU Jinhao, YAN Yuanzhong, ZHANG Qi, BIAN Rong, HE Lei, YE Guanlin. Centrifugal Test and Numerical Analysis of Impact of Surface Surcharge on Existing Tunnels [J]. Journal of Shanghai Jiao Tong University, 2022, 56(7): 886-896.
[5]	CHEN Yonglin (陈永霖), YANG Weidong (杨伟东), XIE Weicheng (谢炜程), WANG Xiaoliang (王晓亮), FU Gongyi∗ (付功义). Meso-Scale Tearing Mechanism Analysis of Flexible Fabric Composite for Stratospheric Airship via Experiment and Numerical Simulation [J]. J Shanghai Jiaotong Univ Sci, 2022, 27(6): 873-884.
[6]	HUO Qianjun (霍前俊), LIU Sheng∗ (刘胜), XU Qingyu (徐青瑜), ZHANG Yuanfei (张远飞), ZHANG Yaoyao (张耀耀), LI Xu (李旭). Bending Prediction Method of Multi-Cavity Soft Actuator [J]. J Shanghai Jiaotong Univ Sci, 2022, 27(5): 631-637.
[7]	LI Jia, LI Huacong, WANG Yue. Transient Characteristics of a High-Speed Aero-Fuel Centrifugal Pump in Variable Gas-Liquid Ratio Conditions [J]. Journal of Shanghai Jiao Tong University, 2022, 56(5): 622-634.
[8]	SUN Jian, PENG Bin, ZHU Bingguo. Numerical Simulation and Experimental Study of Oil-Free Double-Warp Air Scroll Compressor [J]. Journal of Shanghai Jiao Tong University, 2022, 56(5): 611-621.
[9]	ZHOU Xirui, WANG Ping, ZENG Haixiang, ZHANG Yang, PRASHANT Shrotriya, ANTONIO Ferrante, QI Haotian. Large Eddy Simulation on Blow-Off Limit of Methane and Hydrogen-Mixed Gas [J]. Journal of Shanghai Jiao Tong University, 2022, 56(5): 635-647.
[10]	WANG Ning, FU Yunpeng, LI Ting, LI Tie, YI Ping. Optimization of Control Scheme for Large Flow Seawater Cooling System Based on FloMaster-Simulink Co-Simulation [J]. Journal of Shanghai Jiao Tong University, 2022, 56(3): 379-385.
[11]	ZHANG Shaoguang, XIAO Maochao, ZHANG Yufei, CHEN Haixin. Study on Perturbation Introduction Method of Asymmetric Vortex Simulation of Slender Body at High Angle of Attack [J]. Air & Space Defense, 2022, 5(3): 10-16.
[12]	QIN Han, WU Bin, SONG Yuhui, LIU Jin, CHEN Lan. Numerical Analysis of Support Interference for a Slender Configuration at Super Large Angles of Attack in High Speed Wind Tunnel [J]. Air & Space Defense, 2022, 5(3): 44-51.
[13]	XUE Fei, WANG Yuchao, WU Bin. Study on Backward Separation Characteristics of High-Speed Air Vehicle [J]. Air & Space Defense, 2022, 5(3): 80-86.
[14]	XU Zhendong, DUAN Yuxuan, XU Huasong, YANG Fan, LI tie. Extension of the Local Domain-Free Discretization Method to Large Eddy Simulation of Turbulent Flows [J]. Air & Space Defense, 2022, 5(3): 93-98.
[15]	XU Huilia (许慧丽), ZOU Zaojiana,b∗ (邹早建). Numerical Simulation of the Flow in a Waterjet Intake Under Different Motion Conditions [J]. J Shanghai Jiaotong Univ Sci, 2022, 27(3): 356-364.