Journal of Shanghai Jiaotong University ›› 2011, Vol. 45 ›› Issue (08): 1240-1245.
• Electrotechnology • Previous Articles Next Articles
LI Jun-1, 2 , LIU Xiao-Ning-2, ZHANG Guang-Ming-1
Received:
2011-03-25
Online:
2011-08-30
Published:
2011-08-30
[1]李鹏,张玲,王伟,等.微网技术应用与分析[J].电力系统自动化,2009,33(20):109115. LI Peng, ZHANG Ling, WANG Wei, et al. Application and analysis of microgrid[J]. Automation of Electric Power Systems, 2009,33(20):109115. [2]肖立业, 林良真.构建全国统一的新能源电网,推进我国智能电网的建设[J].电工电能新技术, 2009, 28(4): 5459. XIAO Liye, LIN Liangzhen. Construction of unified new energy based power grid and promotion of China smart grid[J]. Advanced Technology of Electrical Engineering and Energy, 2009, 28(4): 5459. [3]丁明,张颖媛,茆美琴. 微网研究中的关键技术[J].电网技术,2009,33(11):611. DING Ming, ZHANG Yingyuan, MAO Meiqin. Key technologies for microgrids being researched[J]. Power System Technology, 2009, 33(11):611. [4]王成山,王守相.分布式发电供能系统若干问题研究[J].电力系统自动化, 2008, 32(20):14. WANG Cheng shan, WANG Shouxiang. Study on some key problems related to distributed generation systems[J]. Automation of Electric Power Systems, 2008, 32(20):14. [5]颜晓庆,杨君,王兆安.并联型电力有源滤波器的数学模型和稳定性分析[J].电工技术学报, 1998, 13(1): 4145. YAN Xiao qing, YANG Jun, WANG Zhaoan. The mathematical model and stabil ity analysis of shunt active power filter[J]. Transactions of China Electrotechnical Society, 1998,13(1):4145. [6]Park SangYoung, Park JongKeun. The modeling and analysis of shunt type custom power device[C]//IEEE Power Engineering Society Winter Meeting. Columbus, USA: IEEE, 2001: 186191. [7]王建,吴捷. 统一潮流控制器的建模与控制研究综述[J].电力自动化设备, 2000, 20(6): 4145. WANG Jian, WU Jie. Overview of UPFC modeling and control[J]. Electric Power Automation Equipment, 2000, 20(6): 4145. [8]Muthu S. Analysis and control of unified active power filter[D]. Canada: University of Victoria, 1998. [9]Corrêa J M, Chakraborty S, Simes M G, et al. A single phase high frequency AC microgrid with an unified power quality conditioner[C] //Proc 38th IEEEIAS Co. USA: IEEE, 2003: 956962. |
[1] | LIUYongfei. Simulation Analysis of a Subsea Hydraulic Control System Based on SimulationX [J]. Ocean Engineering Equipment and Technology, 2022, 9(1): 1-7. |
[2] | WANGJuan, ZHENG Maoyao, ZHANGZiliang, SONGGuangxing, ZHANGLei. Precision Control Technology for Large Semi-Submersible Platforms [J]. Ocean Engineering Equipment and Technology, 2022, 9(1): 21-26. |
[3] | WANGJuan, YANG Mingwang, ZHENG Maoyao, LIULingyun, ZHAOLijun. Application of High Strength Steelin Construction of Large Semi-Submersible Platforms [J]. Ocean Engineering Equipment and Technology, 2022, 9(1): 27-31. |
[4] | LIU Hao , ZHANGNing , WANG Huoping , ZHU Liyun , ZHANG Yu . A Method for Improving the Motion Performance of Steel Catenary Riser by Adding Inertia Bodies to the Sagbend Section #br# [J]. Ocean Engineering Equipment and Technology, 2022, 9(1): 37-45. |
[5] | YIN Yankun, YI Difei. Engineering Criticality Assessment of Key Joint for Hull Structure of Semi-Submersible Floating Production Unit [J]. Ocean Engineering Equipment and Technology, 2022, 9(1): 52-57. |
[6] | LUO Ruiqiao. Application of Down hole Throttle Technology in High Temperature Gas Fields in Eastern South China Sea [J]. Ocean Engineering Equipment and Technology, 2022, 9(1): 58-66. |
[7] | MA Qunsheng (马群圣), CEN Xingxing (岑星星), YUAN Junyi (袁骏毅), HOU Xumin (侯旭敏). Word Embedding Bootstrapped Deep Active Learning Method to Information Extraction on Chinese Electronic Medical Record [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 494-502. |
[8] | ZHANG Shengfa (张胜发), TANG Na (唐纳), SHEN Guofeng (沈国峰), WANG Han (王悍), QIAO Shan (乔杉). Universal Software Architecture of Magnetic Resonance-Guided Focused Ultrasound Surgery System and Experimental Study [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 471-481. |
[9] | KONG Xiangqiang (孔祥强), MENG Xiangxi (孟祥熙), LI Jianbo (李见波), SHANG Yanping (尚燕平), CUI Fulin (崔福林) . Comparative Study on Two-Stage Absorption Refrigeration Systems with Different Working Pairs [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 155-162. |
[10] | ZHUANG Weimin (庄蔚敏), WANG Pengyue (王鹏跃), AO Wenhong (熬文宏), CHEN Gang (陈刚) . Experiment and Simulation of Impact Response of Woven CFRP Laminates with Different Stacking Angles [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 218-230. |
[11] | ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉). Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 1-9. |
[12] | HUANG Ningning (黄宁宁), MA Yixin (马艺馨), ZHANG Mingzhu (张明珠), GE Hao (葛浩), WU Huawei (吴华伟). Finite Element Modeling of Human Thorax Based on MRI Images for EIT Image Reconstruction [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 33-39. |
[13] | WANG Xianjin, GAO Xu, YU Kuigang . Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body [J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 706-713. |
[14] | QIAO Xing, MA Dan, YAO Xuliang, FENG Baolin. Stability and Numerical Analysis of a Standby System [J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 769-778. |
[15] | WU Jin, MIN Yu, YANG Xiaodie, MA Simin . Micro-Expression Recognition Algorithm Based on Information Entropy Feature [J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(5): 589-599. |
Viewed | ||||||||||||||||||||||||||||||||||||||||||||||||||
Full text 661
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||
Abstract 4366
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||