Journal of Shanghai Jiaotong University ›› 2011, Vol. 45 ›› Issue (05): 762-766.
• Architechural Science • Previous Articles Next Articles
LIU Fang, SUN Hong, GE Xiu-Run
Received:
2010-11-22
Online:
2011-05-30
Published:
2011-05-30
CLC Number:
LIU Fang, SUN Hong, GE Xiu-Run. Glass Fiber-reinforced Sand Studied by Triaxial Experiments[J]. Journal of Shanghai Jiaotong University, 2011, 45(05): 762-766.
[1]熊有言. 土工合成纤维土[J].中国公路学报,1990,3(4):8488.XIONG Youyan. Texsol[J]. China Journal of Highway and Transport,1990,3(4):8488.[2]Prabakar J, Sridhar R S. Effect of random inclusion of sisal fibre on strength behaviour of soil[J]. Construction and Building Materials, 2002, 16(2): 123131.[3]Garry D H, Ohashi H. Mechanics of fiber reinforcement in sand[J]. Journal of Geotechnical Engineering, 1983, 109(3): 335353.[4]Sivakumar G L, Vasudevan A K, Sumanta H. Numerical simulation of fiberreinforced sand behavior [J]. Geotextiles and Geomembranes, 2008, 26(5): 181188.[5]Yetimoglu T, Inanir M, Inanir O E. A study on bearing capacity of randomly distributed fiberreinforced sand fills overlying soft clay[J]. Geotextiles and Geomembranes, 2005, 23(1): 174183. [6]Tang Chaosheng, Shi Bin, Zhao Lizheng. Interfacial shear strength of fiber reinforced soil[J]. Geotextiles and Geomembranes, 2010, 28(5): 5462.[7]张旭东,战永亮,张艳美. 纤维土强度特性的试验研究[J]. 路基工程,2001(1):3638. ZHANG Xudong,ZHAN Yongliang,ZHANG Yanmei. Test research of geotechnique textile soil[J]. Subgrade Engineering,2001(1):3638.[8]张艳美,张旭东,张鸿儒. 土工合成纤维土补强机理试验研究及工程应用[J]. 岩土力学,2005,26(8): 13231326.ZHANG Yanmei,ZHANG Xudong,ZHANG Hongru. Test research of geotechnique textile soil reinforcement mechanism and engineering application[J]. Rock and Soil Mechanics,2005,26(8):13231326.[9]姜肇中. 玻璃纤维应用技术[M]. 北京:中国石化出版社,2003:348349.[10]张孟喜,闵 兴. 单层立体加筋土性状的三轴试验研究[J]. 岩土工程学报,2006,28(8):931936.ZHANG Mengxi,MIN Xing. Triaxial tests on sand reinforced with onelayer 3D reinforcement[J]. Chinese Journal of Geotechnical Engineering,2006,28(8):931936.[11]中华人民共和国行业标准编写组. JTG E40—2007, 公路土工试验规程[S]. 北京:人民交通出版社,2007. 收稿日期:20101112 |
[1] | LIUYongfei. Simulation Analysis of a Subsea Hydraulic Control System Based on SimulationX [J]. Ocean Engineering Equipment and Technology, 2022, 9(1): 1-7. |
[2] | WANGJuan, ZHENG Maoyao, ZHANGZiliang, SONGGuangxing, ZHANGLei. Precision Control Technology for Large Semi-Submersible Platforms [J]. Ocean Engineering Equipment and Technology, 2022, 9(1): 21-26. |
[3] | WANGJuan, YANG Mingwang, ZHENG Maoyao, LIULingyun, ZHAOLijun. Application of High Strength Steelin Construction of Large Semi-Submersible Platforms [J]. Ocean Engineering Equipment and Technology, 2022, 9(1): 27-31. |
[4] | LIU Hao , ZHANGNing , WANG Huoping , ZHU Liyun , ZHANG Yu . A Method for Improving the Motion Performance of Steel Catenary Riser by Adding Inertia Bodies to the Sagbend Section #br# [J]. Ocean Engineering Equipment and Technology, 2022, 9(1): 37-45. |
[5] | YIN Yankun, YI Difei. Engineering Criticality Assessment of Key Joint for Hull Structure of Semi-Submersible Floating Production Unit [J]. Ocean Engineering Equipment and Technology, 2022, 9(1): 52-57. |
[6] | LUO Ruiqiao. Application of Down hole Throttle Technology in High Temperature Gas Fields in Eastern South China Sea [J]. Ocean Engineering Equipment and Technology, 2022, 9(1): 58-66. |
[7] | MA Qunsheng (马群圣), CEN Xingxing (岑星星), YUAN Junyi (袁骏毅), HOU Xumin (侯旭敏). Word Embedding Bootstrapped Deep Active Learning Method to Information Extraction on Chinese Electronic Medical Record [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 494-502. |
[8] | ZHANG Shengfa (张胜发), TANG Na (唐纳), SHEN Guofeng (沈国峰), WANG Han (王悍), QIAO Shan (乔杉). Universal Software Architecture of Magnetic Resonance-Guided Focused Ultrasound Surgery System and Experimental Study [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 471-481. |
[9] | KONG Xiangqiang (孔祥强), MENG Xiangxi (孟祥熙), LI Jianbo (李见波), SHANG Yanping (尚燕平), CUI Fulin (崔福林) . Comparative Study on Two-Stage Absorption Refrigeration Systems with Different Working Pairs [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 155-162. |
[10] | ZHUANG Weimin (庄蔚敏), WANG Pengyue (王鹏跃), AO Wenhong (熬文宏), CHEN Gang (陈刚) . Experiment and Simulation of Impact Response of Woven CFRP Laminates with Different Stacking Angles [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 218-230. |
[11] | ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉). Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 1-9. |
[12] | HUANG Ningning (黄宁宁), MA Yixin (马艺馨), ZHANG Mingzhu (张明珠), GE Hao (葛浩), WU Huawei (吴华伟). Finite Element Modeling of Human Thorax Based on MRI Images for EIT Image Reconstruction [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 33-39. |
[13] | WANG Xianjin, GAO Xu, YU Kuigang . Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body [J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 706-713. |
[14] | QIAO Xing, MA Dan, YAO Xuliang, FENG Baolin. Stability and Numerical Analysis of a Standby System [J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 769-778. |
[15] | WU Jin, MIN Yu, YANG Xiaodie, MA Simin . Micro-Expression Recognition Algorithm Based on Information Entropy Feature [J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(5): 589-599. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||