Analysis of PostBreakage Strength of Laminated Glass

Abstract

Abstract: Abstract： In this paper, a novel method to determine the postbreakage strength of laminated glass was proposed based on the three stage model by incorporating the yield line theory. The influences of different design parameters on the post breakage strength of laminated glass were analyzed using the proposed method. The results show that the glass thickness, supporting conditions, interlayer thickness, length of glass plate have a great influence on the post breakage strength of laminated glass.

Key words: laminated glass, postbreakage strength, three stage model, yield line method

CLC Number:

JI Qing, YANG Jian, ZHOU Dai. Analysis of PostBreakage Strength of Laminated Glass [J]. Journal of Shanghai Jiao Tong University, 2016, 50(01): 30-34.

References

［1］刘志海. 夹层玻璃的发展现状及趋势［J］. 中国建材，2003(9):6467. LIU Zhihai. The present situation and development trend of laminated glass［J］. China Building Materials，2003(9): 6467. ［2］KOTT A，VOGEL T. Remaining structural capacity of broken laminated safety glass［C］//Proceedings of the 8th Intemational Glass Conference in Tampere. Tempere: Glass Processing Days，2003:403407. ［3］KOTT A，VOGEL T. Controlling the postbreakage behaviour of laminated safety glass［EB/OL］. (20101124) http://www.glassfiles.com/articles/controllingpostbreakagebehaviourlaminatedsafetyglass Glass Files.2005/2014. ［4］KOTT A，VOGEL T. Safety of laminated glass structures after initial failure［J］. Structural Engineering International，2004，14(2):134138. ［5］DELINCE D，CALLEWAERT D，VANLAERE W，et al. Plastic deformation of polymer interlayers during postbreakage behavior of laminated glasspartim 2: Experimental validation［J］. International Journal of Modern Physics B，2008，22:54475452. ［6］BELIS J，DELINCE D, CALLEWAERT D，et al. Plastic deformation of polymer interlayers during postbreakage behavior of laminated glasspartim 1:Analytical approach［J］. International Journal of Modern Physics B，2008，22:55095514. ［7］SESHADRI M, BENNISON S，JAGOTA A，et al. Mechanical response of cracked laminated plates［J］. Acta Materialia，2002，50(18): 44774490. ［8］张其林. 玻璃幕墙结构［M］. 济南:山东科学技术出版社，2006. ［9］HALDIMANN M，LUIBLE A，OVEREND M. Structural use of glass［M］. Switzerland:International Association for Bridge and Structural Engineering，2008. ［10］ALSOP J A，SAUNDERS R J，COLVIN J. Structural use of glass in buildings［M］. London:The Institution of Structural Engineers，1999. ［11］李维红. 玻璃材料破坏过程的数值模拟与分析［M］. 北京：北京师范大学出版社，2011. ［12］DELINCE D，CALLEWAERT D，BELIS J，et al. Postbreakage behaviour of laminated glass in structural applications ［C］//Conference on Architectural and Structural Applications of Glass. Delft，Netherlands: Bos F, Louter C, Veer F, 2008:459467. ［13］BELIS J，DEPAUW J, CALLEWAERT D，et al. Failure mechanisms and residual capacity of annealed glass/SGP laminated beams at room temperature ［J］. Engineering Failure Analysis，2009，16(6): 18661875. ［14］JONES L L，WOOD R H. Yieldline analysis of slabs［M］. London:Thames and Hudson，1967. ［15］陶静. 极限状态下的塑性绞线及其应用研究［D］. 阜新：辽宁工程技术大学研究生院，2009. ［16］张晓莹. 薄板弯曲问题的塑性铰线法应用研究［D］. 阜新：辽宁工程技术大学研究生院，2006.

[1]	LIU Xinwei, YANG Jian, WANG Xinger, LIU Qiang. Post-Breakage Strength of Laminated Glass Panel Cracked by Impact [J]. Journal of Shanghai Jiaotong University, 2020, 54(3): 227-238.
[2]	DENG Rongbing1，JIN Xianlong1,2，CHEN Jun3 . Threedimensional Numerical Simulation for Blast Response of Double Laminated Insulating Glass Curtain Wall [J]. Journal of Shanghai Jiaotong University, 2010, 44(10): 1456-1459.