上海交通大学学报

上海交通大学学报 >

2019 , Vol. 53 >Issue 11: 1335 - 1341

DOI: https://doi.org/10.16183/j.cnki.jsjtu.2019.11.009

学报（中文）

可生物降解的黄麻纤维/聚乳酸复合材料的制备和力学性能

展开
  • 上海交通大学 材料科学与工程学院， 上海 200030
杜思琦(1994-)，女，湖北省武汉市人，硕士生，主要研究方向为复合材料成型工艺与模拟.

网络出版日期: 2019-12-11

收起

Fabrication and Mechanical Properties of Biodegradable Jute/Polylactic Acid Composites

Expand
  • School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200030, China

Online published: 2019-12-11

Fold

摘要

利用热模压工艺一步成型了可完全生物降解的黄麻增强聚乳酸(PLA)基体复合材料，对机织黄麻纤维布进行碱化处理以尝试提升复合材料的性能，通过扫描电镜观察纤维表面形貌，对黄麻纤维布进行了0°/90° 单轴拉伸和±45° 偏轴拉伸试验，对黄麻纤维/PLA复合材料单层板进行了0°/90° 单轴拉伸试验.纤维的表面形貌显示碱化处理去除了纤维表面杂质，细化了纤维结构，形成了粗糙的纤维表面；拉伸试验结果显示碱化处理后黄麻纤维布和黄麻纤维/PLA复合材料的断裂强度均下降，弹性模量均升高；与纯黄麻纤维布相比，PLA的加入使得复合材料力学性能有很大提升；与聚丙烯作为基体的黄麻纤维增强复合材料相比，黄麻纤维/PLA复合材料不仅可完全降解、无毒无害，而且强度和模量都较高.

关键词： 黄麻纤维； 聚乳酸（PLA）； 复合材料； 力学性能； 碱化处理； 可生物降解

本文引用格式

杜思琦，王继崇，彭雄奇，顾海麟 . 可生物降解的黄麻纤维/聚乳酸复合材料的制备和力学性能[J]. 上海交通大学学报, 2019 , 53(11) : 1335 -1341 . DOI: 10.16183/j.cnki.jsjtu.2019.11.009

Abstract

Completely biodegradable jute fiber reinforced polylactic acid (PLA) composites were fabricated by compression molding in one step. Alkali treatment was conducted to improve material performance. The surface morphology of jute fabrics was observed by scanning electron microscope. The 0°/90° uni-axial tensile test and ±45° bias-tensile test were conducted for jute woven fabrics. The 0°/90° uni-axial tensile test was also performed for jute/PLA biocomposites. The surface morphology of jute fabrics demonstrated that alkali treatment leads to the removal of surface impurities of fabrics, the refinement of fiber structures and the emergence of rougher fiber surface. The results of the tensile tests showed that the strengths of jute fabrics and jute/PLA composites decline after alkali treatment while the moduli increase. And the experimental results also indicated that compared with woven jute fabrics, the mechanical properties of composites were greatly improved via adding PLA. Meanwhile, compared to jute fiber reinforced polypropylene composites, jute/PLA composites are completely degradable, non-toxic and harmless, and they have greater strength and modulus.

Key words： jute fabrics; polylactic acid (PLA); composites; mechanical properties; alkali treatment; biodegradable

参考文献

［1］王定, 王春红, 陈祯, 等. 天然纤维增强聚丙烯基复合材料的制备及静、动态力学性能研究［J］. 塑料工业, 2017, 45(1): 108-112. WANG Ding, WANG Chunhong, CHEN Zhen, et al. Preparation and static and dynamic mechanical properties research of natural fiber reinforced polypropylene composites［J］. China Plastics Industry, 2017, 45(1): 108-112. ［2］MWAIKAMBO L Y, ANSELL M P. Chemical modification of hemp, sisal, jute, and kapok fibers by alkalization［J］. Journal of Applied Polymer Science, 2002, 84(12): 2222-2234. ［3］张仁贵. 黄麻纤维PLA复合材料性能研究［D］. 青岛: 青岛大学, 2011. ZHANG Rengui. Study on the material properties of jute/PLA composites ［D］. Qingdao: Qingdao University, 2011. ［4］OKSMAN K, SKRIFVARS M, SELIN J F. Natural fibres as reinforcement in polylactic acid (PLA) composites［J］. Composites Science and Technology, 2003, 63(9): 1317-1324. ［5］NYAMBO C, MOHANTY A K, MISRA M. Polylactide-based renewable green composites from agricultural residues and their hybrids［J］. Biomacromolecules, 2010, 11(6): 1654-1660. ［6］HUDA M S, DRZAL L T, MOHANTY A K, et al. Chopped glass and recycled newspaper as reinforcement fibers in injection molded poly(lactic acid) (PLA) composites: A comparative study［J］. Composites Science and Technology, 2006, 66(11/12): 1813-1824. ［7］GOWDA T M, NAIDU A C B, CHHAYA R. Some mechanical properties of untreated jute fabric-reinforced polyester composites［J］. Composites Part A: Applied Science and Manufacturing, 1999, 30(3): 277-284. ［8］PLACKETT D, ANDERSEN T L, PEDERSEN W B, et al. Biodegradable composites based on L-polylactide and jute fibres［J］. Composites Science and Technology, 2003, 63(9): 1287-1296. ［9］CYRAS V P, IANNACE S, KENNY J M, et al. Relationship between processing and properties of biodegradable composites based on PCL/starch matrix and sisal fibers［J］. Polymer Composites, 2001, 22(1): 104-110. ［10］张安定, 马胜, 丁辛, 等. 黄麻纤维增强聚丙烯的力学性能［J］. 玻璃钢/复合材料, 2004, 2: 3-5. ZHANG Anding, MA Sheng, DING Xin, et al. Mechanical behaviors of jute fiber reinforced polypropylene composite［J］. Fiber Reinforced Plastics/Composite, 2004, 2: 3-5. ［11］李明. PLA/PBS/黄麻纤维复合材料的制备及其性能研究［D］. 长春: 吉林大学, 2012. LI Ming. Study on the preparation and propetries of poly(lactic acid)/poly(butylene succinate)/jute fiber composites［D］. Changchun: Jilin University, 2012. ［12］KOBAYASHI S, YAMAMOTO T, NAKAI A. Interfacial shear strength evaluation of jute/poly(lactic acid)［J］. Journal of Solid Mechanics and Materials Engineering, 2009, 3(9): 1063-1070. ［13］SINHA E, ROUT S K. Influence of fibre-surface treatment on structural, thermal and mechanical properties of jute fibre and its composite［J］. Bulletin of Materials Science, 2009, 32(1): 65-76. ［14］AHMED K S, VIJAYARANGAN S. Tensile, flexural and interlaminar shear properties of woven jute and jute-glass fabric reinforced polyester composites［J］. Journal of Materials Processing Technology, 2008, 207(1/2/3): 330-335. ［15］汤栋, 赵玉萍, 张娟. 黄麻纤维的表面改性对其复合材料力学性能的影响［J］. 安徽农业科学, 2011, 39(5): 3052-3054. TANG Dong, ZHAO Yuping, ZHANG Yuan. Surface modification of jute and the mechanical properties of jute/epoxy reinforced composites［J］. Journal of Anhui Agriculture Science, 2011, 39(5): 3052-3054. ［16］LUO H L, JI D H, XIONG G Y, et al. Effect of sisal fibre hybridisation on static and dynamic mechanical properties of corn/sisal/polylactide composites［J］. Polymers and Polymer Composites, 2017, 25(6): 463-470. ［17］TAKEMURA K. Effect of surface treatment to tensile static and creep properties for jute fiber reinforced composite［C］//WIT Transactions on The Built Environment/High Performance Structures and Materials III. Southampton, UK: Wessex Institute of Technology, 2006: 143-149. ［18］HUDA M S, DRZAL L T, MOHANTY A K, et al. Effect of fiber surface-treatments on the properties of laminated biocomposites from poly(lactic acid) (PLA) and kenaf fibers［J］. Composites Science and Technology, 2008, 68(2): 424-432. ［19］SHARMA S B, SUTCLIFFE M P F, CHANG S H. Characterisation of material properties for draping of dry woven composite material［J］. Composites Part A: Applied Science and Manufacturing, 2003, 34(12): 1167-1175. ［20］KALIA S, KAITH B S, KAUR I. Pretreatments of natural fibers and their application as reinforcing material in polymer composites: A review［J］. Polymer Engineering & Science, 2009, 49(7): 1253-1272. ［21］BASAK S, SAMANTA K K, CHATTOPADHYAY S K, et al. Flame retardant and antimicrobial jute textile using sodium metasilicate nonahydrate［J］. Polish Journal of Chemical Technology, 2014, 16(2): 106-113. ［22］陈超, 于永玲, 吕丽华, 等. 黄麻毡/PP膜复合汽车内饰材料的制备及工艺优化［J］. 大连工业大学学报, 2011, 30(4): 303-305. CHEN Chao, YU Yongling, L Lihua, et al. Process optimization of jute felt/PP film composites for automobile components［J］. Journal of Dalian Polytechnic University, 2011, 30(4): 303-305. ［23］焦学健, 李丽君, 董抒华, 等. 汽车内饰用PP/黄麻纤维复合材料力学性能［J］. 工程塑料应用, 2017, 45(7): 13-16. JIAO Xuejian, LI Lijun, DONG Shuhua, et al. Mechanical properties of jute fiber reinforced PP composites used by automobile interior［J］. Engineering Plastics Application, 2017, 45(7): 13-16. ［24］韩建, 袁利华, 徐国平. PLA/黄麻复合层压材料的降解性能分析 ［J］. 纺织学报, 2008, 29(8): 48-51. HAN Jian, YUAN Lihua, XU Guoping. Analysis of degradation properties of PLA/jute multi-layer composites［J］. Journal of Textile Research, 2008, 29(8): 48-51. ［25］张瑜, 张丽丽.PLA/黄麻复合材料降解性能的研究 ［J］. 产业用纺织品, 2011, 29(5): 12-16. ZHANG Yu, ZHANG Lili. Study on degradation performance of PLA/jute composite material［J］. Technical Textiles, 2011, 29(5): 12-16.
Options
文章导航

/

〈 〉