二维开缝圆柱环流动力特性

doi:10.16183/j.cnki.jsjtu.2019.99.002

上海交通大学学报 ›› 2019, Vol. 53 ›› Issue (10): 1238-1248.doi: 10.16183/j.cnki.jsjtu.2019.99.002

二维开缝圆柱环流动力特性

朱睿，李尚，陈子煜，刘锦生，鲍锋，刘志荣

厦门大学航空航天学院, 福建厦门 361001

出版日期:2019-10-28 发布日期:2019-11-01
通讯作者: 刘志荣，男，工程师，电话(Tel.)：13515969361；E-mail: lzr1222@126.com.
作者简介:朱睿(1980-)，男，福建省厦门市人，助理教授，研究方向为实验流体力学与微纳工艺交叉学科.
基金资助:
装备预研教育部联合基金(6141A02033529),国家自然科学基金(11072206),福建省自然科学基金(2012J01023)资助项目

Flow Field Dynamic Characteristics of Slit Cylinders

ZHU Rui,LI Shang,CHEN Ziyu,LIU Jinsheng,BAO Feng,LIU Zhirong

School of Aerospace Engineering, Xiamen University, Xiamen 361001, Fujian, China

Online:2019-10-28 Published:2019-11-01

摘要/Abstract

摘要： 使用粒子图像测速(PIV)技术对各二维开缝圆柱环流流场的动力特性进行定性及定量研究，揭示雷诺数(Re)、开缝位置角、开缝倾角及相对缝宽(s/d，s为缝隙宽度，d为圆柱直径)对环流动力特性的影响规律.获取瞬态流场、时均流场以及斯特劳哈尔数(Sr)等关键流场信息，研究开缝圆柱环流流场的结构及演变规律.结果表明：脱落涡与圆柱表面环流的此消彼长，引起120° 以及180° 开缝圆柱的吹吸效应，显著提前圆柱尾流脱落涡的耦合时间；240° 开缝圆柱的缝隙位置接近圆柱后缘，流体未达到缝隙位置时已经发生流动分离，不会形成有效吹吸效应；120° 以及180° 开缝圆柱的尾流脱落涡运动轨迹振幅较大，其流阻系数大于基准圆柱以及240° 开缝圆柱的尾流流阻系数；狭缝角α为180° ，相对缝宽为0.15开缝圆柱的尾流Sr在0.218～0.225范围内波动最小，具备最优的线性稳定性.

关键词: 开缝圆柱；粒子图像测速(PIV)；吹吸效应；脱落涡

Abstract: The particle image velocimetry (PIV) experiments are carried out to qualitative and quantitative study the flow field dynamic characteristics for different slit cylinders in order to reveal the influence of the Re, the slit position, the incline angle and width of the slit on the overall flow characteristics. The transient flow field, the time-averaged flow field and the Sr are obtained and the detailed overall flow structures and its transformation disciplines are studied. The results show that the interactions of the shedding vortex and the circumflux around the cylinder surface induce the blow-suction effect of the 120° and 180° slits, which makes the wake shedding vortex coupling happen significantly earlier. The 240° slit is close to the cylinder trailing edge so that the flow separation already happens before the fluid reach the slit, which fails to generate the effective blow-suction effect. The wake flow resistances for the 120° and 180° slit cylinders are higher because the motion trajectory amplitudes of shedding vortex are higher than that of the basic and 240° types. Sr values for the slit cylinder with α=180° and s/d=0.15 (α is the slit angle, s is the gap width, d is the cylinder diameter) are in the range of 0.218～0.225, which exhibits the strongest linear stability.

Key words: slit cylinder; particle image velocimetry (PIV); blow-suction effect; shedding vortex

中图分类号:

O 357.1

朱睿，李尚，陈子煜，刘锦生，鲍锋，刘志荣. 二维开缝圆柱环流动力特性[J]. 上海交通大学学报, 2019, 53(10): 1238-1248.

ZHU Rui,LI Shang,CHEN Ziyu,LIU Jinsheng,BAO Feng,LIU Zhirong. Flow Field Dynamic Characteristics of Slit Cylinders[J]. Journal of Shanghai Jiaotong University, 2019, 53(10): 1238-1248.

参考文献

［1］GAO D L, CHEN W L, LI H, et al. Flow around a circular cylinder with slit［J］. Experimental Thermal and Fluid Science, 2017, 82: 287-301.
［2］RAHMANI A M, SHAO Y, JUPITERWALA M, et al. Nanoscale flow past a colloidal cylinder confined in a slit channel: Lubrication theory and mole-cular dynamics analysis［J］. Physics of Fluids, 2015, 27(8): 082004.
［3］ORDIA L, VENUGOPAL A, AGRAWAL A, et al. Vortex shedding characteristics of a cylinder with a parallel slit placed in a circular pipe［J］. Journal of Visualization, 2017, 20(2): 263-275.
［4］LIU D, CHAO C Q, WANG Y Z, et al. Axial slit wall effect on the flow instability and heat transfer in rotating concentric cylinders［J］. Journal of Mechanical Science and Technology, 2016, 30(12): 5513-5519.
［5］WANG J S, WANG C. Heat transfer and flow cha-racteristics of a rectangular channel with a small circular cylinder having slit-vent vortex generator［J］. International Journal of Thermal Sciences, 2016, 104: 158-171.
［6］MA H L, KUO C H. Control of boundary layer flow and lock-on of wake behind a circular cylinder with a normal slit［J］. European Journal of Mechanics-B/Fluids, 2016, 59: 99-114.
［7］WANG J S, DONG Y W. The numerical investigation of flow and heat transfer characteristics of flow past a slit-cylinder［J］. Science China Technological Sciences, 2017, 60(4): 602-612.
［8］刘志荣, 邹赫, 刘锦生, 等. 开缝圆柱缝隙倾斜角对脱落涡的影响［J］. 北京航空航天大学学报, 2017, 43(1): 128-135.
LIU Zhirong, ZOU He, LIU Jinsheng, et al. Effect of angle of slit on shedding vortex of slotted circular cylinder［J］. Journal of Beijing University of Aeronautics and Astronautics, 2017, 43(1): 128-135.
［9］江建华, 鲍锋. 基于POD方法开缝圆柱绕流流场的研究［J］. 气体物理, 2017, 2(2): 28-36.
JIANG Jianhua, BAO Feng. POD analysis of a slit circular cylinder near wake［J］. Physics of Gases, 2017, 2(2): 28-36.
［10］WANG J S, WANG C. Features of flow past a circular cylinder with a slit［J］. Scientia Iranica. Transaction B, Mechanical Engineering, 2016, 23(5): 2097-2112.
［11］LIU D, ZHU J, WANG Y Z, et al. Study of slit wall aspect ratio effect on the flow stability and heat transfer in rotating concentric cylinders［J］. Journal of Engineering Research, 2017, 5(3): 216-229.
［12］ZHU H Y, WANG C Y, WANG H P, et al. Tomographic PIV investigation on 3D wake structures for flow over a wall-mounted short cylinder［J］. Journal of Fluid Mechanics, 2017, 831: 743-778.
［13］冯俊杰, 孙冰, 姜杰, 等. 射流场中单个气泡破裂的CFD模拟与PIV实验研究［J］. 高校化学工程学报, 2018, 32(2): 286-294.
FENG Junjie, SUN Bing, JIANG Jie, et al. CFD simulation and PIV investigation on single bubble breakup in turbulent jet flow［J］. Journal of Chemical Engineering of Chinese Universities, 2018, 32(2): 286-294.
［14］贾宇鹏, 王景甫, 郑坤灿, 等.应用粒子图像测试技术测量球床多孔介质单相流动的流场［J］. 物理学报, 2016, 65(10): 106701.
JIA Yupeng, WANG Jingfu, ZHENG Kuncan, et al. Measurement of single phase flow in porous media using PIV technique［J］. Acta Physica Sinica, 2016, 65(10): 106701.

[1]	秦苏洋，向阳，刘洪. 活塞和圆盘涡环的运动学特征分析[J]. 上海交通大学学报（自然版）, 2016, 50(02): 294-299.
[2]	李春曦, 沈雷, 叶学民, 童家麟. 含表面活性剂液膜的去湿特性[J]. 上海交通大学学报（自然版）, 2013, 47(04): 572-578.
[3]	孙学尧a, 张怀新a, b, 潘徐杰a. 一种适用于移动半隐式法的缓解压力振荡方法[J]. 上海交通大学学报（自然版）, 2011, 45(10): 1450-1454.
[4]	潘徐杰,张怀新,孙学尧. 一种适用于移动粒子半隐式法的自由表面识别方法[J]. 上海交通大学学报（自然版）, 2010, 44(01): 134-0138.
[5]	潘徐杰，张怀新. 用移动粒子半隐式法模拟液舱横摇晃荡现象[J]. 上海交通大学学报（自然版）, 2008, 42(11): 1904-1907.
[6]	涂佳黄，周岱，马晋，鲁佳宝. 剪切来流作用下圆柱体结构物的双自由度流致振动[J]. 上海交通大学学报（自然版）, 2014, 48(02): 252-259.
[7]	刘强，谢伟，邱辽原，解学参. 桌面计算机上利用格子Boltzmann方法的GPU计算[J]. 上海交通大学学报（自然版）, 2014, 48(09): 1329-1333.

二维开缝圆柱环流动力特性

Flow Field Dynamic Characteristics of Slit Cylinders

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 7

编辑推荐

Metrics

本文评价