超弹性记忆合金螺旋结构径向变形的理论分析

doi:10.16183/j.cnki.jsjtu.2018.04.005

摘要/Abstract

摘要： 针对超弹性记忆合金(SMA)螺旋结构的实际应用，基于现有的描述轴向拉伸变形的解析模型和简化后的SMA材料本构关系，采用等效转换法，建立均匀外部径向载荷下螺旋结构收缩变形与轴向拉伸变形的联系，得到描述径向收缩变形时线圈半径随外部均匀径向载荷变化的解析模型.通过与有限元数值分析的对比，验证了该解析模型的准确性.将所提出解析模型推广到螺旋编织结构介入治疗支架的实际应用中，通过参数化分析及与有限元数值模拟结果的对比，讨论其适用性，并进行误差分析.由于采用解析函数描述SMA螺旋结构的径向收缩变形特征，便于螺旋结构前期设计时针对目标进行参数调整，所以该理论模型的计算效率优于有限元分析方法.

关键词: 螺旋结构, 形状记忆合金, 超弹性, 解析模型, 径向压强

Abstract: Based on the analytical models which describe axial extension on both ends of superelastic shape memory alloy (SMA) helical structures and the simplified constitutive model of SMA materials, in this paper, the equivalent-transformed method is applied to establish the relationship between the shrinkage of helical springs undergoing uniform radial pressure and the axial extension deformation, with the purpose of satisfying the practical application of helical structures made of SMA. The validity is proved through finite element method (FEM) and then this analytical model is generalized to braided stents for inter interventional therapy. The possibility of this application and error analysis are discussed through parametric analysis and comparison between results of analytical model and FEM. This model can be applied to analyze the deformation behavior of radial compression of SMA helical springs in an analytical way, and its computational efficiency is obviously superior to FEM, so that it is more convenient to adjust parameters to achieve the desired deformation in earlier stage of helical structure design.

Key words: helical structure, shape memory alloy (SMA), superelastic, analytical model, radial pressure

中图分类号:

O 302

蒲祺龙，周翔. 超弹性记忆合金螺旋结构径向变形的理论分析[J]. 上海交通大学学报（自然版）, 2018, 52(4): 410-418.

PU Qilong，ZHOU Xiang. Theoretical Analysis of Superelastic Shape Memory Alloy Helical Structures Subjected to Radial Deformation[J]. Journal of Shanghai Jiaotong University, 2018, 52(4): 410-418.

参考文献

［1］ISHII T. Shape memory & superelastic alloys［M］. Philadelphia: Woodhead Publishing, 2011: 63-76. ［2］ATTANASI G, AURICCHIO F, URBANO M. Theoretical and experimental investigation on sma superelastic springs［J］. Journal of Materials Engineering & Performance, 2011, 20(4/5): 706-711. ［3］KIM S, HAWKES E, CHOY K, et al. Micro artificial muscle fiber using NiTi spring for soft robotics［C］∥The 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems. St Louis: IEEE, 2009: 2228-2234. ［4］SINGH H, JUIKAR P, TIWARI T N, et al. Failure diagnosis & reliability assessment of NiTi shape memory alloy spring for micro-Actuators［C］∥International Conference on Robotics, Automation, Control and Embedded Systems. Chennai: IEEE, 2015. ［5］MASUDA A, MORI Y, SHIMABUKURO S. A concept of shock absorption mechanisms using buckling phenomena and hysteretic spring elements［J］. Journal of System Design & Dynamics, 2008, 2(1): 165-176. ［6］ATTANASI G, AURICCHIO F. Innovative superelastic isolation device ［J］. Journal of Earthquake Engineering, 2011, 15(Sup1): 72-89. ［7］HUANG B, ZHANG H, WANG H, et al. Passive base isolation with superelastic nitinol sma helical springs ［J］. Smart Materials & Structures, 2014, 23(6): 1656-1665. ［8］HUANG B, WUCHUAN P U, ZHANG H, et al. Study on seismic responses of base isolated structures with superelastic sma helical springs［J］. Earthquake Engineering & Engineering Dynamics, 2014, 34(2): 209-215. ［9］FROST M, SEDLK P, KADERVEK L, et al. Numerical and experimental investigation of shape memory alloys subjected to complex mechanical loading: A case study of a NiTi helical spring［C］∥7th ECCOMAS Thematic Conference on Smart Structures and Materials. S Miguel: Paula Jorge, 2015. ［10］BEULE M D. Finite element stent design［D］. Brussels: Gent University, 2008 ［11］VIBHUTE P J. Open-coil retraction spring ［J］. Case Reports in Dentistry, 2011 (3): 1-4. ［12］ZHOU X,YOU Z. Theoretical analysis of superelastic SMA helical structures subjected to axial and torsional loads［J］. Smart Structures and Systems, 2015, 15(5): 1271-1291. ［13］NUUTINEN J P, CLERC C, TRML P. Theoretical and experimental evaluation of the radial force of self-expanding braided bioabsorbable stents［J］. Journal of Biomaterials Science (Polymer Edition), 2003, 14(7): 677-687. ［14］DE B M, VAN C S, MORTIER P, et al. Virtual optimization of self-expandable braided wire stents［J］. Medical Engineering & Physics, 2009, 31(4): 448-453. ［15］WANG R,RAVI-CHANDAR K. Mechanical response of a metallic aortic stent-part I: Pressure-diameter relationship［J］. Journal of Applied Mechanics, 2004, 71(5): 697-705. ［16］ISAYAMA H, NAKAI Y, TOYOKAWA Y, et al. Measurement of radial and axial forces of biliary self-expandable metallic stents［J］. Gastrointestinal Endoscopy, 2009, 70(1): 37-44. ［17］WALH A M. Mechanical springs［M］. Cleveland: Penton Publishing Company, 1944.

[1]	肖飞，金学军. 如何实现固态材料变形制冷?[J]. 上海交通大学学报, 2021, 55(Sup.1): 95-96.
[2]	滕亚军, 陈务军, 杨天洋, 敬忠良, 刘物己. SMA弹簧驱动的柔性操控臂动力学分析[J]. 上海交通大学学报, 2021, 55(8): 1018-1026.
[3]	陈拴, 吴怀娜, 陈仁朋, 沈水龙, 刘源. 上方长距离基坑开挖引起的共线隧道变形研究[J]. 上海交通大学学报, 2021, 55(6): 698-706.
[4]	赵雷雷，于曰伟，周长城，杨福兴. 路面随机激励下康复机器人轮椅的抑振解析[J]. 上海交通大学学报, 2019, 53(12): 1502-1507.
[5]	孙双双，武丹，刘冬迪. 内嵌伪弹性形状记忆合金纤维的复合材料空心梁动态有限元分析[J]. 上海交通大学学报（自然版）, 2018, 52(7): 845-852.
[6]	王立冬1，魏冉2,徐鹏2,赵科新2,彭雄奇1. 基于温度的隔膜超弹性本构模型[J]. 上海交通大学学报（自然版）, 2017, 51(9): 1025-1030.
[7]	王伊卿a，张腾a，匡新斌a，卢秉恒a，洪军a，徐明龙b. NiTi-Al金属基复合材料梁固有频率调节特性理论与实验研究[J]. 上海交通大学学报（自然版）, 2015, 49(09): 1300-1305.
[8]	黄辉祥1,汤文成1,吴斌2,严斌3. 基于超弹性模型的牙周膜力学行为数值模拟[J]. 上海交通大学学报（自然版）, 2014, 48(09): 1263-1267.
[9]	陈鸣1，彭雄奇1，石少卿2，杨华正3. 薄膜超弹性本构模型及其在空气垫中的应用[J]. 上海交通大学学报（自然版）, 2014, 48(06): 883-887.
[10]	林蔚, 颜国正. 驻留-伸缩式胃肠道微型机器人的临界步距模型与实验分析[J]. 上海交通大学学报（自然版）, 2013, 47(04): 656-662.
[11]	卢雪梅，刘庆锁，何烜坤，张玉娇. NiTi薄膜对压电陶瓷材料阻尼性能的影响[J]. 上海交通大学学报（自然版）, 2010, 44(05): 708-0710.