防松帽搭接焊缝力学性能及分区建模方法

doi:10.16183/j.cnki.jsjtu.2017.11.003

摘要/Abstract

摘要： 为了建立精细有限元模型，提高焊缝疲劳寿命仿真预测精度，需准确获取焊缝区的组织及材料力学性能分布.通过金相试验得到了焊缝区域组织分布，结合硬度试验和经验公式获取了焊缝微小区域组织应力应变曲线参数.根据试验结果分析提出一种焊缝分区建模方法，并利用准静态拉伸试验验证了该方法的正确性，为进一步分析焊缝区域失效机制以及预测疲劳寿命奠定了基础.

关键词: 防松帽, 焊缝组织, 力学性能, 分区建模

Abstract: Locking caps are widelyused components in large engineering projects such as nuclear reactors and mining machines. In order to improve the precision of weld FE model and fatigue life prediction, it is required to obtain accurate microstructure and mechanical properties of the weld zone. In this research,the microstructure performance was studied by metallography, combined with hardness test and empirical formula to obtain stressstrain parameters of small regional organizations of the weld. Based on this, a partitioned seam weld modeling method was developed. The method was verified by quasistatic tensile test and lays the foundation for further analysis of failure mechanism and fatigue life prediction of weld zone.

Key words: locking cap, weld microstructure, mechanical property, partitioned model

中图分类号:

TG 407

金雪，朱平，李晗，王庆. 防松帽搭接焊缝力学性能及分区建模方法[J]. 上海交通大学学报（自然版）, 2017, 51(11): 1297-1303.

JIN Xue,ZHU Ping,LI Han,WANG Qing. Research on Mechanical Properties of Locking Cap Lap Welds and Partitioned Seam Weld Model[J]. Journal of Shanghai Jiaotong University, 2017, 51(11): 1297-1303.

参考文献

［1］WEI S T, LV D, LIU R D, et al. Similar and dissimilar resistance spot welding of advanced high strength steels: Welding and heat treatment procedures, structure and mechanical properties［J］. Science & Technology of Welding & Joining, 2014, 19(5): 427-435. ［2］汤忠斌, 徐绯, 许泽建, 等. 焊缝结构微区材料力学性能研究［J］. 机械强度, 2010, 32(1): 58-63. TANG Zhongbin, XU Fei, XU Zejian, et al. Research on mechanical properties of micro-zones of welding line［J］. Journal of Mechanical Strength, 2010, 32(1): 58-63. ［3］张腾, 周友龙, 刘拥军, 等. 6061铝合金车体搅拌摩擦焊接接头微型剪切试验研究［J］. 电焊机, 2012, 42(10): 92-95. ZHANG Teng, ZHOU Youlong, LIU Yongjun, et al. Research of the FSW joint of 6061 aluminum alloy by mini-shear-testing［J］. Electric Welding Machine, 2012, 42(10): 92-95. ［4］DORN L, LEI B. Derivation of the characteristic virtues of the tensile and fracture mechanics test from the results of the microshear test［J］. Schweissen und Schneiden, 1992, 44 (8): 145-147. ［5］PAVLINA E J, TYNE C J V. Uniform elongation and the stress-strain flow curve of steels calculated from hardness using empirical correlations［J］. Journal of Materials Engineering & Performance, 2015, 24(11): 4415-4420. ［6］朱浩川, 姚谏. 不锈钢材料的应力-应变模型［J］. 空间结构, 2011, 17(1): 62-69. ZHU Haochuan, YAO Jian. Stress-strain model for stainless steel［J］. Spatial Structures, 2011, 17(1): 62-69. ［7］RAMBERG W, OSGOOD W R. Description of stress-strain curves by three parameters［J］. Technical Report Archive & Image Library, 1943(902). ［8］QUACH W M, HUANG J F. Two-stage stress-strain models for light-gauge steels［J］. Advances in Structural Engineering, 2014, 17(7): 937-949. ［9］BRUDER T, STRZEL K, BAUMGARTNER J, et al. Evaluation of nominal and local stress based approaches for the fatigue assessment of seam welds［J］. International Journal of Fatigue, 2012, 34(1): 86-102. ［10］AMODEO C M, LAI W, LEE J, et al. Failure modes of gas metal arc welds in lap-shear specimens of high strength low alloy (HSLA) steel［J］. Engineering Fracture Mechanics, 2014, 131: 74-99. ［11］杨锋平, 孙秦. 薄板搅拌摩擦焊焊缝区应力集中的有限元分析［J］. 焊接学报, 2007, 28(12): 109-112. YANG Fengping, SUN Qin. Analysis of stress concentration in weld of sheets welded by friction stir welding using finite element method［J］. Transactions of the China Welding Institution, 2007, 28(12): 109-112. ［12］蔡新荣, 韦生, 吕增, 等. 304/304L和316/316L奥氏体不锈钢焊接性能的对比与分析［J］. 钢结构, 2012(S1): 366-369. CAI Xinrong, WEI Sheng, L Zeng, et al. Comparison and analysis on welding performance between 304/304L and 316/316L austenitic stainless steels［J］. Steel Construction, 2012(S1): 366-369. ［13］AFSHAN S, GARDNER L. The continuous strength method for structural stainless steel design［J］. Thin-Walled Structures, 2013, 68(10): 42-49. ［14］ROSSI B, AFSHAN S, GARDNER L. Strength enhancements in cold-formed structural sections. Part II. Predictive models［J］. Journal of Constructional Steel Research, 2013, 83(4): 189-196. ［15］QUACH W M, QIU P. Strength and ductility of corner materials in cold-formed stainless steel sections［J］. Thin-Walled Structures, 2014, 83(1): 28-42. ［16］施欲亮, 朱平, 张宇, 等. 提高汽车碰撞仿真计算效率的网格规模控制方法［J］. 上海交通大学学报, 2008, 42(6): 905-909. SHI Yuliang, ZHU Ping, ZHANG Yu, et al. Methods of the mesh dimension constraint for enhancing the simulation efficiency of vehicle crash［J］. Journal of Shanghai Jiao Tong University, 2008, 42(6): 905-909.

[1]	王烨成, 李洋, 张迪, 杨越, 罗震. 碳纤维增强热塑性复合材料与高强钢的电阻单元焊[J]. 上海交通大学学报, 2022, 56(10): 1349-1358.
[2]	朱强，秦飞，王武荣，韦习成. 不同搭接顺序下三层板电阻点焊接头力学性能[J]. 上海交通大学学报, 2019, 53(9): 1122-1129.
[3]	张威，敖三三，罗震，郝志壮，陈瑶，冯梦楠，解龑. 焊接能量对铝镍超声波焊接接头性能的影响[J]. 上海交通大学学报, 2019, 53(9): 1130-1135.
[4]	何冠中,楼铭,马运五,李永兵. 铝钢电阻单元焊接头力学性能模拟[J]. 上海交通大学学报, 2019, 53(5): 616-623.
[5]	祁睿格，何春霞，付菁菁，赵丽梅，姜彩昀. 无机纳米粒子对木粉/高密度聚乙烯木塑复合材料热学及力学性能的影响[J]. 上海交通大学学报（自然版）, 2019, 53(3): 373-379.
[6]	杜思琦，王继崇，彭雄奇，顾海麟. 可生物降解的黄麻纤维/聚乳酸复合材料的制备和力学性能[J]. 上海交通大学学报, 2019, 53(11): 1335-1341.
[7]	李萍，张凯，王薄笑天，薛克敏. 7A60铝合金搅拌摩擦加工组织及性能[J]. 上海交通大学学报, 2019, 53(11): 1381-1388.
[8]	俞建超，林有希. 高速加工中无氧铜的动态力学性能[J]. 上海交通大学学报（自然版）, 2018, 52(5): 587-592.
[9]	赖睿，蔡艳，吴岳，华学明. 光束焦点位置对双相不锈钢光纤激光#br# 焊接焊缝成形和组织的影响[J]. 上海交通大学学报（自然版）, 2017, 51(4): 418-.
[10]	陈建稳1，周涵1，陈务军2,赵兵2,王明洋3. 飞艇用层压织物膜材料在双向应力作用下的弹性参数分析[J]. 上海交通大学学报（自然版）, 2017, 51(3): 344-.
[11]	赵君1,余海东2. 基于绝对节点坐标法的柔性双臂机构动力学分析[J]. 上海交通大学学报（自然版）, 2017, 51(10): 1160-1165.
[12]	郑钰，李宏烨，庄新村，赵震. 金属板料剪切试验方法及应用的研究现状[J]. 上海交通大学学报（自然版）, 2014, 48(03): 422-426.
[13]	张克伟1，佘欢2，刘宏亮2，疏达2，王俊2. Si含量对高强高韧7050铝合金组织和力学性能的影响[J]. 上海交通大学学报（自然版）, 2013, 47(11): 1712-1716.
[14]	范永丰. 有限淋滤作用下石灰处治膨胀土的力学性能[J]. 上海交通大学学报（自然版）, 2013, 47(09): 1390-1394.
[15]	徐媛媛，桂宗彦，杲云，陆冲，程树军. 柠檬酸基聚酯/聚乳酸共混物的力学性能[J]. 上海交通大学学报（自然版）, 2013, 47(05): 806-810.