耙吸式挖泥船先进性评价方法

摘要/Abstract

摘要：

摘要：在国家标准的基础上，结合耙吸式挖泥船（TSHD）的特点，提出一套适用于已建造投入使用的TSHD性能水平等级评价方法，建立了相应的评价指标体系和计算方法，用于对建造完成的TSHD的先进性评价.经过分析和计算实例表明，该性能水平等级评价方法是可行和有效的.利用获取的评价结果，可对船舶在同类型挖泥船中的先进性水平进行定位，评估船舶设计是否达到预期的效果，找出存在的问题，以指导今后的工作；同时，可为国标中的船舶性能水平等级评价体系作有益补充.

关键词: , 耙吸式挖泥船, 先进性评价, 评价指标体系

Abstract:

Abstract： Combined with the characteristics of trailing suction hopper dredger (TSHD), the advanced grade evaluation method for TSHD which has been delivered is proposed on the basis of the national standard. The evaluation criteria system and calculation method are put forward to assess the capability of TSHD. Results of analysis and calculation examples prove the availability of evaluation criteria system and calculation method for TSHD. The advanced level of TSHD in the same type ship can be graded according to the obtained evaluation results to appraise whether the TSHD achieves the desired results, find out the existing problems, and summarize the experience to guide the future work. At the same time, the evaluation criteria system and calculation method will be a beneficial complement to function grade valuation system of ships and ocean structures in the national standard.

Key words: trailing suction hopper dredger (TSHD), advanced grade evaluation, evaluation criteria system

中图分类号:

王运龙，李楷，沈嘉祺，金超光，陈小雅. 耙吸式挖泥船先进性评价方法[J]. 上海交通大学学报（自然版）, 2017, 51(3): 305-.

WANG Yunlong，LI Kai，SHEN Jiaqi，JIN Chaoguang，CHEN Xiaoya. Advanced Grade Evaluation of Trailing Suction Hopper Dredger[J]. Journal of Shanghai Jiaotong University, 2017, 51(3): 305-.

参考文献

［1］CHEN Zhanglan,YE Jiawei, WANG Dongjiao, et al. The numerical prediction of draghead motion of trailing suction Hopper dredger in time domain［J］. Ocean Engineering, 2014, 91(15):146151.
［2］ZHAN Keyi, GAO Haibo, CHEN Hui, et al.Optimal retrofitting of a hybrid propulsion system using NSGAII algorithm for trailing suction hopper dredger［C］∥2015 IEEE Electric Ship Technologies Symposium. Old Town Alexandria United States: Institute of Electrical and Electronics Engineers Inc, 2015: 201206.
［3］LYNYRD W, TALMON A M, VAN RHEE C. 3D CFD simulations of trailing suction hopper dredger plume mixing: Comparison with field measurements［J］. Marine Pollution Bulletin, 2014,88(15):3446.
［4］刘厚恕.国外挖泥船发展新态势［J］.船舶,2009,20(6):17.
LIU Houshu. Latest development of dredgers abroad［J］. Ship & Boat, 2009,20(6):17.
［5］王元战，路宽. 风浪流作用下耙吸式挖泥船运动数值模拟［J］.中国造船, 2011,52(1)：4652.
WANG Yuanzhan, LU Kuan. Numerical simulation of trailing suction hoper dredger with the effect of wind,wave and current［J］.Shipbuilding of China，2011,52(1)：4652.
［6］王运龙,纪卓尚,林焰.自升式钻井平台先进性评价方法［J］. 上海交通大学学报, 2010,44(6):755757.
WANG Yunlong, JI Zhuoshang, LIN Yan. The advanced grade evaluation of selfelevating drilling unit ［J］.Journal of Shanghai Jiao Tong University, 2010,44(6):755757.
［7］梁军，赵勇. 系统工程导论［M］. 北京:化学工业出版社，2013:49.
［8］中国标准出版社部. 中国国家标准汇编(144): GB1169789［S］. 北京：中国标准出版社，1993.

[1]	王聚团, 戚晓宁, 黄志明. 水下生产管汇测试技术及其改进研究[J]. 海洋工程装备与技术, 2022, 9(2): 43-49.
[2]	袁振钦, 邹科, 孙亚峰, 刘刚, 屈衍, 李居跃. 基于时域分析法的动态电缆疲劳分析[J]. 海洋工程装备与技术, 2022, 9(2): 50-55.
[3]	王娟, 杨明旺, 郑茂尧, 刘凌云, 赵立君. 高强钢在大型半潜式平台组块建造中的应用[J]. 海洋工程装备与技术, 2022, 9(1): 27-31.
[4]	陈欣, 赵晓磊, 王立坤, 肖德明, 张腾月. 深水大型吸力锚建造技术研究[J]. 海洋工程装备与技术, 2022, 9(1): 32-36.
[5]	尹彦坤, 易涤非. 半潜式生产平台船体结构关键节点工程临界评估[J]. 海洋工程装备与技术, 2022, 9(1): 52-57.
[6]	MA Qunsheng (马群圣), CEN Xingxing (岑星星), YUAN Junyi (袁骏毅), HOU Xumin (侯旭敏). Word Embedding Bootstrapped Deep Active Learning Method to Information Extraction on Chinese Electronic Medical Record[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 494-502.
[7]	ZHANG Shengfa (张胜发), TANG Na (唐纳), SHEN Guofeng (沈国峰), WANG Han (王悍), QIAO Shan (乔杉). Universal Software Architecture of Magnetic Resonance-Guided Focused Ultrasound Surgery System and Experimental Study[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 471-481.
[8]	安庆升, 孙立东, 武秋生. 碳纤维增强复合材料发射筒设计研究[J]. 空天防御, 2021, 4(2): 13-.
[9]	KONG Xiangqiang (孔祥强), MENG Xiangxi (孟祥熙), LI Jianbo (李见波), SHANG Yanping (尚燕平), CUI Fulin (崔福林) . Comparative Study on Two-Stage Absorption Refrigeration Systems with Different Working Pairs[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 155-162.
[10]	ZHUANG Weimin (庄蔚敏), WANG Pengyue (王鹏跃), AO Wenhong (熬文宏), CHEN Gang (陈刚) . Experiment and Simulation of Impact Response of Woven CFRP Laminates with Different Stacking Angles[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 218-230.
[11]	ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉). Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 1-9.
[12]	HUANG Ningning (黄宁宁), MA Yixin (马艺馨), ZHANG Mingzhu (张明珠), GE Hao (葛浩), WU Huawei (吴华伟). Finite Element Modeling of Human Thorax Based on MRI Images for EIT Image Reconstruction[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 33-39.
[13]	WANG Xianjin, GAO Xu, YU Kuigang . Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 706-713.
[14]	QIAO Xing, MA Dan, YAO Xuliang, FENG Baolin. Stability and Numerical Analysis of a Standby System[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 769-778.
[15]	WU Jin, MIN Yu, YANG Xiaodie, MA Simin . Micro-Expression Recognition Algorithm Based on Information Entropy Feature[J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(5): 589-599.