上海交通大学学报(自然版) ›› 2016, Vol. 50 ›› Issue (02): 222-227.

• 数理科学和化学 • 上一篇    下一篇

单晶蓝宝石的摩擦化学机械抛光

李刚,文东辉,王扬渝   

  1. (浙江工业大学 特种装备制造与先进加工技术教育部重点实验室, 杭州 310032)
  • 收稿日期:2014-10-31 出版日期:2016-02-29 发布日期:2016-02-29
  • 基金资助:
    国家科技支撑计划(2011BAK15B07),国家自然科学基金项目(50705088),教育部科学技术研究重点项目(210088),浙江省科技厅公益性技术应用研究计划项目(2013C31024)资助

Tribochemical Polishing of Single Crystal Sapphire Wafer

LI Gang,WEN Donghui,WANG Yangyu   

  1. (Key Laboratory of Special Purpose Equipment and Advanced Manufacturing Technology, Ministry of Education, Zhejiang University of Technology, Hangzhou 310032, China)
  • Received:2014-10-31 Online:2016-02-29 Published:2016-02-29

摘要: 摘要: 为揭示抛光过程中SiO2磨粒与蓝宝石的摩擦化学反应机理,结合摩擦化学理论和纳米压痕试验方法,采用有限元法模拟纳米压头压入与卸载后蓝宝石表面的应力分布情况.数值模拟结果表明:当SiO2磨粒与蓝宝石的接触应力为5~15 GPa时,发生固相反应所需活化能约为14.46 kJ/mol,反应速率常数约为0.07~0.23 μm/min;在摩擦化学反应过程中,SiO2磨粒与蓝宝石的接触半径为15~21 nm,其变形量为6.88~10.22 nm.低载荷纳米压痕试验结果表明:忽略压头与SiO2磨粒的硬度、几何形状等影响因素,单颗SiO2磨粒上的作用力小于0.7 mN,其微观表面粗糙度Rt=38.19 nm及Ra=3.62 nm.

关键词: 蓝宝石衬底, 摩擦化学抛光, 纳米压入, 有限元法, 纳米压痕试验法

Abstract: Abstract: In order to reveal the mechanism of tribochemical polishing process between sapphire wafer and silica colloid particles, contact conditions were discussed by using the tribochemistry theory and nanoindentation method. Stress distribution of sapphire wafer under unload condition was simulated by using the finite element method. When the contact stress along the subsurface of sapphire wafer is about 5 to 15 GPa, the activation energy during tribochemical reaction is approximately 14.46 kJ/mol, and 0.07 to 0.23 μm/min for the reaction rate. When the contact radius between silica colloid and sapphire wafer is around 15 to 21 nm during the tribochemistry reaction process, the deformation value is about 6.88 to 10.22 nm. The experimental results for lowloading nanoindentation and polishing process show that when the contact force is less than 0.7 mN, without considering the hardness and form errors between diamond indent tip and abrasive grit, the polished sapphire wafer can achieve a smooth surface with Rt 38.19 nm and Ra 3.62 nm.

Key words: Key words: sapphire wafer, tribochemical polishing, nanoindentation, finite element method; nanoindentation method

中图分类号: