双桨船附体阻力尺度效应

摘要/Abstract

摘要：

摘要：以光滑平板为研究对象，探索了高雷诺数时的数值计算方法.在此基础上，以DTMB5415裸船体和全附体模型为研究对象，忽略自由液面效应，采用RANS(Reynolds Averaged NavierStokes)方法结合SST k－ω(ShearStress Transport k－ω)模型计算了包含实尺度在内的多种缩尺模型的船舶黏性流场，详细分析了双桨水面舰船附体阻力的尺度效应作用.通过研究发现：不同的附体，其阻力尺度效应程度并不相同；对于双桨船，附体阻力占整个船体阻力的份额较大，其尺度效应作用不可忽略，可以引入附体阻力尺度效应修正因子来进行模型到实船附体阻力的换算，附体阻力尺度效应修正因子与雷诺数的对数近似成三次多项式函数的关系.

关键词: , 双桨船, 附体阻力, 尺度效应, 修正因子, 数值计算

Abstract:

Abstract： A flat plate was studied for the validation of the numerical method in high Reynolds number condition, based on which, the viscous flow field of different scale model including full scale ship of DTMB5415 bare and appendaged hull were solved numerically by RANS (Reynolds Averaged Navier-Stokes) method and SST k－ω (Shear-Stress Transport k-ω) turbulence model without considering the free surface effect, and the scale effect of appendage resistance of twinscrew ship was analyzed in detail. It shows that the scale effect is quite different for individual appendages. The scale effect of appendage resistance cannot be ignored due to the large proportion in total resistance for twinscrew ship. The appendage resistance correction factor was introduced for the extrapolation of appendage resistance from model scale to full scale ship, and it is found that the cubic polynomial function is fit perfectly for the relationship of the appendage resistance correction factor and the Reynolds number in the logarithmic scales.
Key words：

Key words: twin-screw ship, appendage resistance, scale effect, correction factor, numerical calculation

中图分类号:

U 661.31

王展智1，熊鹰1，孙海涛2，黄政1，王睿1. 双桨船附体阻力尺度效应[J]. 上海交通大学学报（自然版）, 2015, 49(02): 255-261.

WANG Zhanzhi1,XIONG Ying1，SUN Haitao2,HUANG Zheng1，WANG Rui1. Scale Effect of Appendage Resistance of TwinScrew Ship[J]. Journal of Shanghai Jiaotong University, 2015, 49(02): 255-261.

参考文献

［1］姜次平，陈良权．双螺旋桨船的美人架阻力的尺度效应［J］．上海交通大学学报，1982，16(3)：7785．

JIANG Ciping，CHEN Liangquan．Scale effect in the resistance of shaft brackets of twinscrew vessels［J］．Journal of Shanghai Jiaotong University，1982，16(3)：7785．

［2］许定生．尺度作用与阻力系数的相关分析［J］．船舶力学，2001，5(2)：2329．

XU Dingsheng．Study of correlation analysis on scale function and resistance coefficient［J］．Journal of Ship Mechanics，2001，5(2)：2329．

［3］陈纪平，赵汉魂，沈玉林．船舶附体阻力换算方法研究［J］. 船舶，2009，20(2)：1317．

CHEN Jiping, ZHAO Hanhun, SHEN Yulin. Extrapolation methods for appendage resistance［J］. Ship&Boat，2009，20(2):1317．

［4］冯毅．多桨船附体阻力的预报方法［J］. 船舶，2010，21(2)：1519．

FENG Yi．Forecast on appendage resistance for multiscrew ship［J］. Ship &Boat，2010，21(2):1519．

［5］The resistance committee. Final report and recommendations to the 25rd ITTC［C］∥Proceedings of 25rd ITTC. Fukuoka, Japan: ITTC, 2008：2181.

［6］Wyatt D, Fu T, Taylor G, et al. A comparison of fullscale experimental measurements and computational predictions of the transomstern wave of the R/V Athena I［DB/CD］. Seoul: SNAME, 2008.

［7］付慧萍，杨晨俊．雷诺数对船舶阻力和伴流场的影响［J］．上海交通大学学报，2009，43(10)：15551563．

FU Huiping，YANG Chenjun．The effect of Reynolds number on resistance and wake of ship［J］． Journal of Shanghai Jiaotong University，2009，43(10)：15551563．

［8］Bhushan S, Xing T, Carrica P, et al．Model and fullscale URANS simulation of Athena resistance, powering, seakeeping, and 5415 maneuvering［J］. Journal of Ship Research, 2009,53(4):179198.

［9］Choi J, Kim J, Lee H, et al．Computational prediction of shipspeed performance［J］. Journal of Marine Science and Technology, 2009, 14(3):322333.

［10］Eca L, Hoekstra M. Quantifying roughness effects by ship viscous flow calculations ［DB/CD］.Pasadena: SNAME,2010.

［11］Choi J, Min K, Kim J, et al. Resistance and propulsion characteristics of various commercial ships based on CFD results［J］．Ocean Engineering, 2010, 37(7):549566.

［12］The resistance committee. Final report and recommendations to the 26rd ITTC［C］∥Proceedings of 26rd ITTC. Rio de Janeiro, Brazil: ITTC, 2011:1160.

［13］Watson R D, Hall R M, Anders J B. Review of skin friction measurements including recent highReynolds number results from NASA Langley NTF［C］∥Proceedings of AIAA. Denver, USA: AIAA, 2000:120.

［14］Christopher C，Toby R．Propeller flow field mapping of model 5415 using 3component laser Doppler velocimetry［R］. Bethesda：David W Taylor Naval Ship R & D center, 2005．

[1]	赵忠良, 李浩, 赖江, 杨海泳, 王晓冰, 李玉平. 导弹模型直气复合气动特性研究[J]. 空天防御, 2022, 5(3): 1-9.
[2]	王聚团, 戚晓宁, 黄志明. 水下生产管汇测试技术及其改进研究[J]. 海洋工程装备与技术, 2022, 9(2): 43-49.
[3]	袁振钦, 邹科, 孙亚峰, 刘刚, 屈衍, 李居跃. 基于时域分析法的动态电缆疲劳分析[J]. 海洋工程装备与技术, 2022, 9(2): 50-55.
[4]	王娟, 杨明旺, 郑茂尧, 刘凌云, 赵立君. 高强钢在大型半潜式平台组块建造中的应用[J]. 海洋工程装备与技术, 2022, 9(1): 27-31.
[5]	陈欣, 赵晓磊, 王立坤, 肖德明, 张腾月. 深水大型吸力锚建造技术研究[J]. 海洋工程装备与技术, 2022, 9(1): 32-36.
[6]	尹彦坤, 易涤非. 半潜式生产平台船体结构关键节点工程临界评估[J]. 海洋工程装备与技术, 2022, 9(1): 52-57.
[7]	程晨, 王晓亮. 考虑蒙皮透射率的飞艇热力学模型及其热特性[J]. 上海交通大学学报, 2021, 55(7): 868-877.
[8]	MA Qunsheng (马群圣), CEN Xingxing (岑星星), YUAN Junyi (袁骏毅), HOU Xumin (侯旭敏). Word Embedding Bootstrapped Deep Active Learning Method to Information Extraction on Chinese Electronic Medical Record[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 494-502.
[9]	ZHANG Shengfa (张胜发), TANG Na (唐纳), SHEN Guofeng (沈国峰), WANG Han (王悍), QIAO Shan (乔杉). Universal Software Architecture of Magnetic Resonance-Guided Focused Ultrasound Surgery System and Experimental Study[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 471-481.
[10]	安庆升, 孙立东, 武秋生. 碳纤维增强复合材料发射筒设计研究[J]. 空天防御, 2021, 4(2): 13-.
[11]	KONG Xiangqiang (孔祥强), MENG Xiangxi (孟祥熙), LI Jianbo (李见波), SHANG Yanping (尚燕平), CUI Fulin (崔福林) . Comparative Study on Two-Stage Absorption Refrigeration Systems with Different Working Pairs[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 155-162.
[12]	ZHUANG Weimin (庄蔚敏), WANG Pengyue (王鹏跃), AO Wenhong (熬文宏), CHEN Gang (陈刚) . Experiment and Simulation of Impact Response of Woven CFRP Laminates with Different Stacking Angles[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 218-230.
[13]	ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉). Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 1-9.
[14]	HUANG Ningning (黄宁宁), MA Yixin (马艺馨), ZHANG Mingzhu (张明珠), GE Hao (葛浩), WU Huawei (吴华伟). Finite Element Modeling of Human Thorax Based on MRI Images for EIT Image Reconstruction[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 33-39.
[15]	WANG Xianjin, GAO Xu, YU Kuigang . Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 706-713.