基于自适应步长参数的快速一次可靠度计算方法

摘要/Abstract

摘要：

摘要：为能够快速搜索到极限状态函数的设计点以实现快速一次可靠度计算方法，在已有的基于迭代算法（HLRF）的设计点搜索方法的基础上，借助不精确一维搜索Shi-Shen准则，提出了基于自适应步长参数的一次可靠度计算方法（aHLRF）.相比传统的方法，aHLRF不仅具有收敛保证，而且还能利用已有迭代信息自适应地选取算法参数.从计算效率、鲁棒性等方面对aHLRF进行了探讨和算例对比.结果显示：新方法可极大地提高一次可靠度的计算效率，尤其在设计点附近非线性强的情况下优势更为明显.

关键词: , 设计点；不精确一维搜索； ShiShen准则；一次可靠度计算

Abstract:

Abstract： The key problem for fast first order reliability method (FORM) is to quickly find out the design point of limit state function. After analyzing some HLRFbased design point searching algorithms, a novel FORM was proposed based on the Shi-Shen line search rule. As this FORM is based on adaptive step size parameters, it is referred to as aHLRF. Compared with the traditional HLRF-based method, the aHLRF not only is globally convergent, but also can adaptively estimate some important algorithm parameters using previous iteration information. The robustness and efficiency of the aHLRF were also discussed. Examples illustrate that the aHLRF is very efficiency for estimating the first order reliability probability, especially for problems whose the nonlinearity of limit state function near the design point is very large.

Key words: design point, inexact linear search, Shi-Shen rule, first order reliability method

中图分类号:

周生通，李鸿光. 基于自适应步长参数的快速一次可靠度计算方法[J]. 上海交通大学学报（自然版）, 2014, 48(11): 1574-1579.

ZHOU Shengtong,LI Hongguang. Fast First Order Reliability Method Based on Adaptive Step Size Parameters[J]. Journal of Shanghai Jiaotong University, 2014, 48(11): 1574-1579.

参考文献

［1］Lemaire M. Structural reliability［M］. Hoboken: John Wiley & Sons, 2009.

［2］Hasofer A M, Lind N C. Exact and invariant secondmoment code format［J］. Journal of the Engineering Mechanics Division, ASCE, 1974, 100(1): 111121.

［3］Rackwitz R, Flessler B. Structural reliability under combined random load sequences［J］. Computers & Structures, 1978, 9(5): 489494.

［4］Liu P, Der Kiureghian A. Optimization algorithms for structural reliability［J］. Structural Safety, 1991, 9(3): 161177.

［5］Zhang Y, Der Kiureghian A. Finite element reliability methods for inelastic structures［R］. Berkeley CA: Department of Civil and Environmental Engineering, University of California, 1997.

［6］Santosh T V, Saraf R K, Ghosh A K, et al. Optimum step length selection rule in modified HLRF method for structural reliability［J］. International Journal of Pressure Vessels and Piping, 2006, 83(10): 742748.

［7］Santos S R, Matioli L C, Beck A T. New optimization algorithms for structural reliability analysis［J］. Computer Modeling in Engineering & Sciences(CMES), 2012, 83(1): 2355.

［8］Abdo T, Rackwitz R. A new betapoint algorithm for large timeinvariant and timevariant reliability problems［C］∥Der Kiureghian A, ThoftChristensen P. Reliability and Optimization of Structural Systems ’90. Berlin Heidelberg: Springer, 1991: 112.

［9］Haukaas T, Kiureghian A D. Strategies for finding the design point in nonlinear finite element reliability analysis［J］. Probabilistic Engineering Mechanics， 2006, 21(2): 133147.

［10］秦权，林道锦，梅刚. 结构可靠度随机有限元——理论及工程应用［M］. 北京: 清华大学出版社, 2006.

［11］贡金鑫. 工程结构可靠度计算方法［M］. 大连: 大连理工大学出版社, 2003.

［12］Gong J X, Yi P. A robust iterative algorithm for structural reliability analysis［J］. Struct Multidisc Optim， 2011, 43: 519527.

［13］Shi Z J, Shen J. New inexact line search method for unconstrained optimization［J］. Journal of Optimization Theory and Applications, 2005, 127(2): 425446.

［14］Dennis J E, Schnabel R D. Numerical methods for unconstrained optimization and nonlinear equations［M］. Philadelphia: Society for Industrial and Applied Mathematics, 1996.

[1]	王聚团, 戚晓宁, 黄志明. 水下生产管汇测试技术及其改进研究[J]. 海洋工程装备与技术, 2022, 9(2): 43-49.
[2]	袁振钦, 邹科, 孙亚峰, 刘刚, 屈衍, 李居跃. 基于时域分析法的动态电缆疲劳分析[J]. 海洋工程装备与技术, 2022, 9(2): 50-55.
[3]	王娟, 杨明旺, 郑茂尧, 刘凌云, 赵立君. 高强钢在大型半潜式平台组块建造中的应用[J]. 海洋工程装备与技术, 2022, 9(1): 27-31.
[4]	陈欣, 赵晓磊, 王立坤, 肖德明, 张腾月. 深水大型吸力锚建造技术研究[J]. 海洋工程装备与技术, 2022, 9(1): 32-36.
[5]	尹彦坤, 易涤非. 半潜式生产平台船体结构关键节点工程临界评估[J]. 海洋工程装备与技术, 2022, 9(1): 52-57.
[6]	MA Qunsheng (马群圣), CEN Xingxing (岑星星), YUAN Junyi (袁骏毅), HOU Xumin (侯旭敏). Word Embedding Bootstrapped Deep Active Learning Method to Information Extraction on Chinese Electronic Medical Record[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 494-502.
[7]	ZHANG Shengfa (张胜发), TANG Na (唐纳), SHEN Guofeng (沈国峰), WANG Han (王悍), QIAO Shan (乔杉). Universal Software Architecture of Magnetic Resonance-Guided Focused Ultrasound Surgery System and Experimental Study[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 471-481.
[8]	安庆升, 孙立东, 武秋生. 碳纤维增强复合材料发射筒设计研究[J]. 空天防御, 2021, 4(2): 13-.
[9]	KONG Xiangqiang (孔祥强), MENG Xiangxi (孟祥熙), LI Jianbo (李见波), SHANG Yanping (尚燕平), CUI Fulin (崔福林) . Comparative Study on Two-Stage Absorption Refrigeration Systems with Different Working Pairs[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 155-162.
[10]	ZHUANG Weimin (庄蔚敏), WANG Pengyue (王鹏跃), AO Wenhong (熬文宏), CHEN Gang (陈刚) . Experiment and Simulation of Impact Response of Woven CFRP Laminates with Different Stacking Angles[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 218-230.
[11]	ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉). Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 1-9.
[12]	HUANG Ningning (黄宁宁), MA Yixin (马艺馨), ZHANG Mingzhu (张明珠), GE Hao (葛浩), WU Huawei (吴华伟). Finite Element Modeling of Human Thorax Based on MRI Images for EIT Image Reconstruction[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 33-39.
[13]	WANG Xianjin, GAO Xu, YU Kuigang . Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 706-713.
[14]	QIAO Xing, MA Dan, YAO Xuliang, FENG Baolin. Stability and Numerical Analysis of a Standby System[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 769-778.
[15]	WU Jin, MIN Yu, YANG Xiaodie, MA Simin . Micro-Expression Recognition Algorithm Based on Information Entropy Feature[J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(5): 589-599.