上海交通大学学报(自然版) ›› 2014, Vol. 48 ›› Issue (1): 111-115.

• 交通运输 • 上一篇    下一篇

基于广义预测控制的主动吸收造波

李宏伟,庞永杰,秦再白,杨溢
  

  1. (哈尔滨工程大学 水下机器人技术重点实验室, 哈尔滨 150001)
     
     
     
  • 收稿日期:2013-01-12
  • 基金资助:

    总装预研基金项目(9140C27010511CB0102)资助

Active Absorption Wave-Making Using Generalized Predictive Control

LI Hongwei,PANG Yongjie,QIN Zaibai,YANG Yi
  

  1. (Science and Technology on Underwater Vehicle Laboratory, Harbin Engineering University, Harbin 150001, China)
  • Received:2013-01-12

摘要:

通过最小二乘法支持向量机对主动吸收造波模型进行在线辨识,基于广义预测控制算法提出一种新颖的主动吸收造波策略.采用高阶边界元法与自由面混合欧拉拉格朗日模型建立二维推板造波数值波浪水槽,将预测控制器的输出作为造波边界条件,进行了不规则波主动吸收造波仿真对比试验与白噪声波谱的验证试验,并采用波浪入、反射分离算法进行分析.结果表明:预测控制器具有较好的鲁棒性和快速响应能力,对于模型试验中常用的波浪具有良好的主动吸收造波效果.
 
 

关键词: 主动吸收造波, 支持向量机, 广义预测控制, 数值波浪水槽, 不规则波

Abstract:

An active absorption wave-making model was identified  online with least squares support vector machines (LS-SVM), and a novel method was proposed based on the strategy generalized prediction control  algorithm. A piston-type 2D numerical wave flume was developed with the higherorder boundary element method and mixed Eulerian-Lagrangian free surface condition. Meanwhile, the predictive controller was embedded in it as wavemaking boundary. An absorbing wave-making contrast simulation for irregular wave and a white noise verification test were conducted in numerical wave flume. Using the separating incident and reflected irregular waves method, the test data was also analyzed. Simulation and verification test results verify that the controller has a strong robusticity and quick response ability, and this system has good active absorbing effect for waves commonly used in model tests.
 

Key words: active absorption wave-making, support vector machines (SVM), generalized predictive control (GPC), numerical wave flume, irregular waves

中图分类号: