基于聚类与判别分析的冷热电联产后评估建模方法

上海交通大学学报（自然版） ›› 2013, Vol. 47 ›› Issue (11): 1728-1732.

基于聚类与判别分析的冷热电联产后评估建模方法

郑春元，吴静怡，翟晓强

（上海交通大学机械与动力工程学院，上海 200240）

收稿日期:2013-07-15
基金资助:
国家自然科学基金资助项目(51076099)

A Modeling Method for Post-Evaluation of CCHP Systems Based on Cluster and Discriminate Analysis

ZHENG Chunyuan,WU Jingyi,ZHAI Xiaoqiang

(School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200240, China)

Received:2013-07-15

摘要/Abstract

摘要：

提出了一种基于聚类和判别分析的冷热电联产系统后评估建模方法.它是对一定数量的系统样本进行分析，得出指标权重、优化指标组合、系统分类和判别函数的建模方法.案例分析结果表明，利用该方法能建立准确可靠的后评估模型.该模型具有同时兼顾权值偏重、综合指标和各指标数据结构特点，对冷热电联产系统进行全面评价的能力.

关键词: 冷热电联产, 后评估, 聚类分析, 判别分析

Abstract:

A modeling method for combined cooling, heating and power (CCHP) systems based on both cluster and discriminate analysis was proposed, which can get the weightings of criteria, the optimized combination of criteria, the classification of the system and the discriminate function by analyzing the samples. In order to verify the proposed method, a case study was presented. The results show that this method can establish an accurate and reliable post-evaluation model for CCHP systems. By considering the weightings, value and characteristic of the criteria, the model established by the proposed method can evaluate the performance of CCHP systems roundly and reasonably.

Key words: combine cooling, heating and power (CCHP), post-evaluation, cluster analysis, discriminate analysis

中图分类号:

TK 01

郑春元，吴静怡，翟晓强. 基于聚类与判别分析的冷热电联产后评估建模方法[J]. 上海交通大学学报（自然版）, 2013, 47(11): 1728-1732.

ZHENG Chunyuan,WU Jingyi,ZHAI Xiaoqiang. A Modeling Method for Post-Evaluation of CCHP Systems Based on Cluster and Discriminate Analysis[J]. Journal of Shanghai Jiaotong University, 2013, 47(11): 1728-1732.

参考文献

［1］Wang J, Zhai Z J, Jing Y, et al. Influence analysis of building types and climate zones on energetic, economic and environmental performances of BCHP systems［J］. Applied Energy, 2011, 88: 30973112.

［2］Cao J. Evaluation of retrofitting gasfired cooling and heating systems into BCHP using design optimization［J］. Energy Policy, 2009, 37: 23682374.

［3］Liu C, Chen D, Feng Y, et al. Postevaluating of wind power project based on AHP model［C］∥ Power and Energy Engineering Conference (APPEEC). Chengdu China:［s.n.］, 2010: 14.

［4］Wang J J, Jing Y Y, Zhang C F, et al. Integrated evaluation of distributed triplegeneration systems using improved grey incidence approach［J］. Energy, 2008, 33: 14271437.

［5］Wang J J, Jing Y Y, Zhang C F, et al. A fuzzy multicriteria decisionmaking model for trigeneration system［J］. Energy Policy, 2008, 36: 38233832.

［6］Wang J J, Zhang C F, Jing Y Y, et al. Multicriteria analysis of combined cooling, heating and power systems in different climate zones in China［J］. Applied Energy, 2010, 87: 12471259.

［7］Cho H, Mago, P J, Luck R, et al. Evaluation of CCHP systems performance based on operational cost, primary energy consumption, and carbon dioxide emission by utilizing an optimal operation scheme［J］. Applied Energy, 2009, 86: 25402549.

［8］Mago P J, Fumo N, Chamara L M, et al. Performance analysis of CCHP and CHP systems operating following the thermal and electric load［J］. International Journal of Energy Research, 2009, 33: 852864.

［9］Wu J Y, Wang J L, Li S, et al. Multiobjective optimal operation strategy study of microCCHP system［J］. Energy, 2012, 48: 472483.

［10］李卫东. 应用多元统计分析［M］. 北京：北京大学出版社，2008.

[1]	刘鸿宇, 吴达坚. 我国海洋新材料技术机会识别研究[J]. 海洋工程装备与技术, 2025, 12(3): 123-127.
[2]	王火平, 王德洋, 彭怡锦, 王巍巍. 振动监测在导管架平台结构安全保障方面的几种应用[J]. 海洋工程装备与技术, 2023, 10(4): 78-83.
[3]	曹骞，李君，曲大为. 大连市乘用车典型行驶工况的构建[J]. 上海交通大学学报, 2018, 52(11): 1537-1542.
[4]	文志诚, 陈志刚, 唐军. 基于聚类分析的网络安全态势评估方法[J]. 上海交通大学学报, 2016, 50(9): 1407-1414.
[5]	纪洪泉,何潇,周东华. 基于多元统计分析的故障检测方法[J]. 上海交通大学学报（自然版）, 2015, 49(06): 842-848.
[6]	杨军,梅雪松,赵亮,马驰,冯斌,施虎. 基于模糊聚类测点优化与向量机的坐标镗床热误差建模[J]. 上海交通大学学报（自然版）, 2014, 48(08): 1175-1182.
[7]	郑紫元，汪小帆. 基于电子邮件网络的人类动力学 [J]. 上海交通大学学报（自然版）, 2011, 45(02): 195-0201.
[8]	周瑾，吴智铭. 基于序列分析的制造车间平面布局设计[J]. 上海交通大学学报（自然版）, 2008, 42(12): 1947-1952.