中厚板流动应力模型的反求分析与选择

上海交通大学学报（自然版） ›› 2013, Vol. 47 ›› Issue (11): 1685-1689.

中厚板流动应力模型的反求分析与选择

李坦,庄新村,向华,赵震

(上海交通大学塑性成形技术与装备研究院，上海 200030)

收稿日期:2012-12-14
基金资助:
国家自然科学基金资助项目（50975175），上海市曙光计划项目（11SG15）

Inverse Analysis and Selection of Flow Curve Model for Medium-Thick Plate

LI Tan,ZHUANG Xincun,XIANG Hua,ZHAO Zhen*

(Institute of Forming Technology and Equipment, Shanghai Jiaotong University, Shanghai 200030, China)

Received:2012-12-14

摘要/Abstract

摘要：

准确的材料流动应力曲线是进行塑性成形有限元模拟的基础.选用Ludwig模型、Swift模型和Voce++模型等流动应力模型,运用反求法分析从中厚板截取的小压缩试样的室温压缩过程,获得了较大应变范围的流动应力曲线.结果表明,Swift模型表现出较好的结果精度、计算效率和对初始参数的稳定性，对于反求法更为适用.

关键词: 流动应力模型, 中厚板, 反求法, 室温压缩

Abstract:

Accurate flow curve of materials is the prerequisite of sound simulation of metal forming. Inverse analysis can be applied to identify larger strain range of flow curve by room temperature compression of small cylinder specimen cut from medium-thick plate. Common flow curve models, such as Ludwig model, Swift model and Voce++ model, were used in inverse analysis and sensitive analysis in this paper. The result shows that Swift model is accurat, efficient and robust for initial input in inverse analysis.

Key words: flow curve model, medium-thick plate, inverse analysis, room temperature compression

中图分类号:

TG 113.25

李坦,庄新村,向华,赵震. 中厚板流动应力模型的反求分析与选择[J]. 上海交通大学学报（自然版）, 2013, 47(11): 1685-1689.

LI Tan,ZHUANG Xincun,XIANG Hua,ZHAO Zhen*. Inverse Analysis and Selection of Flow Curve Model for Medium-Thick Plate

[J]. Journal of Shanghai Jiaotong University, 2013, 47(11): 1685-1689.

参考文献

［1］孙文杰, 向华, 庄新村，等. 工艺参数对中厚板高凸台挤压成形影响的分析［J］. 上海交通大学学报, 2012, 45(11): 17101714.

SUN Wenjie, XIANG Hua, ZHUANG Xincun, et al. The influence factors of forming results in mediumthick sheet metal high boss forming process［J］. Journal of Shanghai Jiaotong University, 2012, 45(11): 17101714.

［2］Cooreman S, Lecompte D, Sol H, et al. Identification of mechanical material behavior through inverse modeling and DIC［J］. Experimental mechanics, 2008, 48(4): 421433.

［3］Khoddam S, Hodgson P, Jafari Bahramabadi M. An inverse thermalmechanical analysis of the hot torsion test for calibrating the constitutive parameters［J］. Materials & Design, 2011, 32(4): 19031909.

［4］Kim N, Choi H. The prediction of deformation behavior and interfacial friction under hot working conditions using inverse analysis［J］. Journal of Materials Processing Technology, 2008, 208(1): 211221.

［5］Szeliga D, Gawad J, Pietrzyk M. Inverse analysis for identification of rheological and friction models in metal forming［J］. Computer Methods in Applied Mechanics and Engineering, 2006, 195(48): 67786798.

［6］Cooreman S, Lecompte D, Sol H, et al. Elastoplastic material parameter identification by inverse methods: Calculation of the sensitivity matrix［J］. International Journal of Solids and Structures, 2007, 44(13): 43294341.

［7］Ghouati O, Gelin J. Identification of material parameters directly from metal forming processes［J］. Journal of Materials Processing Technology, 1998, 80:560564.

［8］Parteder E, Bünten R. Determination of flow curves by means of a compression test under sticking friction conditions using an iterative finiteelement procedure［J］. Journal of Materials Processing Technology, 1998, 74(1): 227233.

［9］Kunc R, Prebil I. Lowcycle fatigue properties of steel 42CrMo4［J］. Materials Science and Engineering: A, 2003, 345(1): 278285.

［10］Nelder J A, Mead R. A simplex method for function minimization［J］. The Computer Journal, 1965, 7(4): 308313.

［11］Kalidindi S, Abusafieh A, ElDanaf E. Accurate characterization of machine compliance for simple compression testing［J］. Experimental Mechanics, 1997, 37(2): 210215.

[1]	PENG Pai, CHEN Cong , YANG Yongsheng . Particle Swarm Optimization Based on Hybrid Kalman Filter and Particle Filter [J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 681-688.
[2]	程香平，彭旭东，孟祥铠. 菱形孔密封环端面密封性能分析[J]. 上海交通大学学报（自然版）, 2014, 48(1): 33-38.
[3]	何小二,王德禹. 支持向量机近似模型的参数选取及其在结构优化中的应用[J]. 上海交通大学学报（自然版）, 2014, 48(04): 464-468.
[4]	朱文峰1，王杰1，夏国勇2，林佩剑1. 带筋车门密封系统的神经网络优化方法[J]. 上海交通大学学报（自然版）, 2014, 48(03): 377-381.
[5]	李将川1，陈军1，陈劼实1，夏志永2，曾丹2. 考虑预应变与烘烤时效的流动应力模型[J]. 上海交通大学学报（自然版）, 2013, 47(11): 1680-1684.
[6]	贾红学a, 龙丹冰a, 刘西拉b. 特大增量步算法在板分析中的应用[J]. 上海交通大学学报（自然版）, 2013, 47(02): 187-192.
[7]	程斌, 赵金城, 肖汝诚. 基于等稳定水准的中厚板加劲肋优化设计[J]. 上海交通大学学报（自然版）, 2011, 45(04): 528-533.