AR(p)扰动下最小均方误差受控过程的联合监控

摘要/Abstract

摘要：

摘要：针对最小均方误差(Minimum Mean Square Error, MMSE)受控过程联合监控可控输入与过程输出这一问题，在任意阶自回归AR(p)平稳扰动模型下开发了一种通用的联合控制图，并将界内点排列非随机判异规则引入其中.同时，对AR(p)平稳扰动模型下生产过程的MMSE控制器和输入与输出的平均链长(Average Run Length, ARL)进行了推导.最后，通过仿真实验验证了该联合控制图的有效性.

关键词: , 最小均方误差控制器, AR(p)扰动, 联合控制图

Abstract:

Abstract： In view of the joint monitoring problem of manipulated inputs and process outputs in minimum-mean-squared-error-controlled processes, a generic joint control chart was developed under the arbitrary order auto regressive AR(p) stationary disturbance model. The out-of-control rule, that is, non-random permutations in in-control dots, was also brought into the joint control chart. Meanwhile, the MMSE controller and the average run length (ARL) of inputs and outputs were derived based on the AR(p) stationary disturbance model. Finally, simulation experiments were implemented to demonstrate the validity of the joint control chart.

Key words: minimum mean square error （MMSE）-controller, AR(p) disturbance, joint control chart

中图分类号:

TP 273
TH 16

张锐，杜世昌，奚立峰. AR(p)扰动下最小均方误差受控过程的联合监控[J]. 上海交通大学学报（自然版）, 2014, 48(12): 1739-1744.

ZHANG Rui,DU Shichang,XI Lifeng. Joint Monitoring of MMSE-Controlled Processes for AR(p) Disturbances[J]. Journal of Shanghai Jiaotong University, 2014, 48(12): 1739-1744.

参考文献

［1］Montgomery D C, Keats J B, Runger G C, et al. Integrating statistical process control and engineering process control［J］. Journal of Quality Technology, 1994, 26(2): 7987.

［2］万松,李艳婷,于福成.多工序自相关过程的统计监测［J］.上海交通大学学报, 2010,44(9):11871191.

WAN Song, LI Yanting, YU Fucheng. Statistical process monitoring of autocorrelation data from multistage processes［J］. Journal of Shanghai Jiaotong University, 2010,44(9):11871191.

［3］杨慕升,张宇.基于STA/SPC/EPC 的集成方法质量控制技术研究［J］. 机床与液压, 2011, 39(7):1114.

YANG Musheng, ZHANG Yu. Study on quality control of integrated method based in STA/SPC/EPC［J］. Machine Tool & Hydraulics, 2011, 39(7):1114.

［4］王秀红.SPC/EPC整合下自相关过程监测方法研究［J］.制造业自动化, 2013, 35(4):3741.

WANG Xiuhong. Method of monitoring autocorrelation process under integrated SPC/EPC［J］. Manufacturing Automation, 2013, 35(4):3741.

［5］Hu Y, Cheng X. A quality control approach of PVC gloves based on the integration of SPC and EPC［J］. Communications in StatisticsTheory and Methods, 2012, 41(24): 44704483.

［6］Park M, Kim J, Jeong M K, et al. Economic cost models of integrated APC controlled SPC charts［J］. International Journal of Production Research, 2012, 50(14): 39363955.

［7］Messina W S, Montgomery D C, Keats J B, et al. Strategies for statistical monitoring of integral control for the continuous process industries［J］. Quality and Reliability, 1996, 47: 193214.

［8］Tsung F. Joint monitoring of PIDcontrolled processes［J］. Journal of Quality Technology, 1999, 31(3): 275285.

［9］Tsung F, Shi J. Integrated design of runtorun PID controller and SPC monitoring for process disturbance rejection［J］. IIE Transactions, 1999, 31(6): 517527.

［10］Jiang W, Tsui K L. SPC monitoring of MMSEand PIcontrolled processes［J］. Journal of Quality Technology, 2002, 34(4): 384398.

［11］Jiang W. A joint monitoring scheme for automatically controlled processes［J］. IIE Transactions, 2004, 36(12): 12011210.

［12］Vander Wiel S A. Monitoring processes that wander using integrated moving average models［J］. Technometrics, 1996, 38(2): 139151.

[1]	王聚团, 戚晓宁, 黄志明. 水下生产管汇测试技术及其改进研究[J]. 海洋工程装备与技术, 2022, 9(2): 43-49.
[2]	袁振钦, 邹科, 孙亚峰, 刘刚, 屈衍, 李居跃. 基于时域分析法的动态电缆疲劳分析[J]. 海洋工程装备与技术, 2022, 9(2): 50-55.
[3]	王娟, 杨明旺, 郑茂尧, 刘凌云, 赵立君. 高强钢在大型半潜式平台组块建造中的应用[J]. 海洋工程装备与技术, 2022, 9(1): 27-31.
[4]	陈欣, 赵晓磊, 王立坤, 肖德明, 张腾月. 深水大型吸力锚建造技术研究[J]. 海洋工程装备与技术, 2022, 9(1): 32-36.
[5]	尹彦坤, 易涤非. 半潜式生产平台船体结构关键节点工程临界评估[J]. 海洋工程装备与技术, 2022, 9(1): 52-57.
[6]	ZHANG Shengfa (张胜发), TANG Na (唐纳), SHEN Guofeng (沈国峰), WANG Han (王悍), QIAO Shan (乔杉). Universal Software Architecture of Magnetic Resonance-Guided Focused Ultrasound Surgery System and Experimental Study[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 471-481.
[7]	MA Qunsheng (马群圣), CEN Xingxing (岑星星), YUAN Junyi (袁骏毅), HOU Xumin (侯旭敏). Word Embedding Bootstrapped Deep Active Learning Method to Information Extraction on Chinese Electronic Medical Record[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 494-502.
[8]	安庆升, 孙立东, 武秋生. 碳纤维增强复合材料发射筒设计研究[J]. 空天防御, 2021, 4(2): 13-.
[9]	KONG Xiangqiang (孔祥强), MENG Xiangxi (孟祥熙), LI Jianbo (李见波), SHANG Yanping (尚燕平), CUI Fulin (崔福林) . Comparative Study on Two-Stage Absorption Refrigeration Systems with Different Working Pairs[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 155-162.
[10]	ZHUANG Weimin (庄蔚敏), WANG Pengyue (王鹏跃), AO Wenhong (熬文宏), CHEN Gang (陈刚) . Experiment and Simulation of Impact Response of Woven CFRP Laminates with Different Stacking Angles[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 218-230.
[11]	ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉). Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 1-9.
[12]	HUANG Ningning (黄宁宁), MA Yixin (马艺馨), ZHANG Mingzhu (张明珠), GE Hao (葛浩), WU Huawei (吴华伟). Finite Element Modeling of Human Thorax Based on MRI Images for EIT Image Reconstruction[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 33-39.
[13]	WANG Xianjin, GAO Xu, YU Kuigang . Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 706-713.
[14]	QIAO Xing, MA Dan, YAO Xuliang, FENG Baolin. Stability and Numerical Analysis of a Standby System[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 769-778.
[15]	WU Jin, MIN Yu, YANG Xiaodie, MA Simin . Micro-Expression Recognition Algorithm Based on Information Entropy Feature[J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(5): 589-599.