硬态车削轴承钢GCr15切屑形成机理分析

上海交通大学学报（自然版） ›› 2013, Vol. 47 ›› Issue (05): 800-805.

硬态车削轴承钢GCr15切屑形成机理分析

合烨1，王昌赢2，陈小安1，张勇1，刘星1

（1.重庆大学机械传动国家重点实验室，重庆 400044; 2.上海交通大学机械与动力工程学院，上海 200240）

收稿日期:2012-10-26 出版日期:2013-05-28 发布日期:2013-05-28
基金资助:
中央高校基本科研业务费科研专项基金(CDJZR10280002) 资助

Finite Element Simulation of Chip Formation Mechanism in Hard Turning GCr15 Steel

HE Ye1,WANG Changying2,CHEN Xiaoan1,ZHANG Yong1，LIU Xing1

(1.State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044, China; 2.School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200240, China)

Received:2012-10-26 Online:2013-05-28 Published:2013-05-28

摘要/Abstract

摘要：

使用有限元仿真软件ABAQUS对硬态车削淬硬轴承钢GCr15（62HRC）的切削过程进行仿真，从切屑形态出发，结合切削力和切削温度等场量对切屑的形成过程进行分析.结果表明：在低速（60 m/min）切削时，没有形成明显的绝热剪切带而形成了连续切屑；在高速（181 m/min）切削时，形成了锯齿状切屑和绝热剪切带，且因绝热剪切区的热软化效应而使材料的承载能力下降，切削力发生波动；在高速切削时，工件与切屑自由表面处出现了微裂纹，并在一定程度上沿绝热剪切带而向刀尖方向扩展，使得锯齿更加明显，导致切削力“二次下降”并推迟了下一锯齿节块的形成；硬态车削淬硬轴承钢GCr15的绝热剪切是形成锯齿状切屑的前提，而周期性微裂纹的出现和扩展则是源于绝热剪切作用下材料发生的韧性断裂.

Abstract:

The formation of serrated chip in hard turning and tool life and the quality of the machined surface are closely related. Simulation experiments of hard turning hardened bearing GCr15 steel (62HRC) were conducted using finite element simulation software ABAQUS. According to chip morphology, combined with cutting force and temperature field, the formation process and mechanism were researched and conclusions were obtained. Firstly, continuous chip is formed under relatively lower cutting speed (60 m/min), while under a higher speed of 181 m/min, serrated chip is formed with adiabatic shear band. The thermal softening effect of adiabatic shear band declines in the carrying capacity, and in turn results in fluctuates of cutting force. Secondly, under 181 m/min, micro-cracks appear on the connected surface between the workpiece and the chip and they extend along the adiabatic shear band to some extent. This not only makes the saw-tooth more apparent and results in “The 2th-Drop” of cutting force but also delays the formation of the next saw-tooth block. Thirdly, for hard turning hardened GCr15 steel, adiabatic shear theory is a precondition to form saw-tooth chips. The appearance and extension of the periodic microcracks are also based on the ductile fracture of the shear adiabatic effect.

Key words: hard turning, GCr15 steel, saw-tooth chip, finite element simulation, ductile fracture

中图分类号:

合烨1，王昌赢2，陈小安1，张勇1，刘星1. 硬态车削轴承钢GCr15切屑形成机理分析[J]. 上海交通大学学报（自然版）, 2013, 47(05): 800-805.

HE Ye1,WANG Changying2,CHEN Xiaoan1,ZHANG Yong1，LIU Xing1. Finite Element Simulation of Chip Formation Mechanism in Hard Turning GCr15 Steel[J]. Journal of Shanghai Jiaotong University, 2013, 47(05): 800-805.

参考文献

［1］管小燕, 任家隆, 李伟. 基于数值模拟的钛合金锯齿状切屑研究［J］. 江苏科技大学学报:自然科学版, 2007, 21(4): 7075.

GUAN Xiaoyan, REN Jialong, LI Wei. Study on serrated chip of Ti6AI4V alloy based on FEM simulation ［J］. Journal of Jiangsu University of Science and Technology: Natural Science Edition, 2007, 21(4): 7075.

［2］Shaw M C, Vyas A. The mechanism of chip formation with hard turning steel ［J］. Annals of the CIRP, 1998, 47(1): 7782.

［3］AlZkeri A. Finite element modeling of hard turning ［D］. Ohio: Ohio State University, 2007.

［4］Ye G G, Xue S F, Jiang M Q, et al. Modeling periodic adiabatic shear band evolution during high speed machining Ti6Al4V alloy ［J］. International Journal of Plasticity, 2013, 40: 3955.

［5］吴申峰, 张雪萍. 淬硬轴承钢锯齿状切屑形成机理［J］. 上海交通大学学报, 2011, 45(1): 7177.

WU Shenfeng, ZHANG Xueping. Sawtooth chip formation process and mechanism in hard turning AISI 52100 bearing steel ［J］. Journal of Shanghai Jiaotong University, 2011, 45(1): 7177.

［6］陈光军, 刘献礼, 王宇. 精密硬态切削轴承钢GCr15 切屑形成的微观观察与分析［C］∥ 全国高等学校制造自动化研究会第十三届学术年会论文集. 哈尔滨：全国高等学校制造自动化研究会, 2008.

［7］Chou Y K, Evans C J. White layers and thermal modeling of hard turned surfaces ［J］.

International Journal of Machine Tools and Manufacture, 1999, 39(12): 18631881.

［8］Mamalis A, Branis A, Manolakos D. Modeling of precision hard cutting using implicit finite element methods ［J］. Journal of Materials Processing Technology, 2002, 123(3): 464475.

［9］Guo Y B, Liu C R. Mechanical properties of hardened AISI 52100 steel in hard machining processes ［J］. Journal of Manufacturing Science and Engineering, 2002, 124(1): 19.

［10］Umbrello D, Hua J, Shivpuri R. Hardnessbased flow stress and fracture models for numerical simulation of hard machining AISI 52100 bearing steel ［J］. Journal of Materials Science and Engineering, 2004, 374(1): 90100.

［11］Guo Y B, Wen Q, Woodbury K A. Dynamic material behavior modeling using internal state variable plasticity and its application in hard machining simulation ［J］. Journal of Manufacturing Science and Engineering, 2006, 128(3): 749759.

［12］Shi J, Liu C R. On predicting chip morphology and phase transformation in hard machining ［J］. International Journal of Advanced Manufacturing Technology, 2006, 27(78): 645654.