攻击直升飞机通信导航识别系统的分布式综合模块化航空电子设备综合技术研究

上海交通大学学报（自然版） ›› 2012, Vol. 46 ›› Issue (05): 756-761.

攻击直升飞机通信导航识别系统的分布式综合模块化航空电子设备综合技术研究

徐黎1, 庞瑞帆2, 3, 张怡1, 关新平4

（1. 西北工业大学电子信息学院，西安710129； 2. 中国航空无线电电子研究所，上海200233； 3. 航空电子系统综合技术国防科技重点实验室，上海200233； 4. 上海交通大学电子信息与电气工程学院，上海200240）

收稿日期:2011-06-15 出版日期:2012-05-28 发布日期:2012-05-28
基金资助:
中国航空工业集团公司创新基金项目（2009D61563）

Study on DIMA Integrated Techniques for Communication Navigation Identification System of Attack Helicopter

XU Li-1, PANG Rui-Fan-2, 3 , ZHANG Yi-1, GUAN Xin-Ping-4

(1. School of Electronics and Information, Northwestern Polytechnical University, Xi’an 710129, China; 2. China National Aeronautical Radio Electronics Research Institute, Shanghai 200233, China; 3. National Key Laboratory of Science and Technology on Avionics Integration Technologies,
Shanghai 200233, China; 4. School of Electronic, Information and Electrical Engineering, Shanghai Jiaotong University, Shanghai 200240, China)

Received:2011-06-15 Online:2012-05-28 Published:2012-05-28

摘要/Abstract

摘要： 介绍了以AH64D阿帕奇为代表的攻击直升飞机通信导航识别(CNI)系统，分析了基于时间触发的分布式综合模块化航空电子设备(DIMA)的结构，构建了一种基于DIMA和公共对象请求代理体系结构(CORBA)逻辑软总线的CNI系统结构.结果表明，通过构建分布式CNI系统结构和高容错的通信网络，可实现支持抵近射频前端的通信资源高度综合，适用于攻击直升飞机自然散热的装机环境，满足故障快速隔离的维护需求.

关键词: 攻击直升飞机, , 通信导航识别系统, 分布式综合模块化航空电子设备, CORBA逻辑软总线

Abstract: The communicationnavigationidentification (CNI) system of attack helicopter represented by AH64D “Apache” was introduced. The distributed integrated modular avionics (DIMA) architecture based on time triggered mechanism was analyzed. An architecture of CNI system based on DIMA architecture and common object request broker architecture (CORBA) logical software bus technology was built. The results show that this architecture achieves to support high integration of communication resources which are close to RF frontend by building distributed system architecture and high fault tolerance communication network, adapts to natural cooling condition for attack helicopter, and meets the maintenance requirements of rapid fault propagation.

Key words: attack helicopter, communicationnavigation-identification (CNI) system, distributed integrated modular avionics (DIMA), common object request broker architecture (CORBA) logical soft bus

中图分类号:

V 19

徐黎1, 庞瑞帆2, 3, 张怡1, 关新平4. 攻击直升飞机通信导航识别系统的分布式综合模块化航空电子设备综合技术研究[J]. 上海交通大学学报（自然版）, 2012, 46(05): 756-761.

XU Li-1, PANG Rui-Fan-2, 3 , ZHANG Yi-1, GUAN Xin-Ping-4. Study on DIMA Integrated Techniques for Communication Navigation Identification System of Attack Helicopter[J]. Journal of Shanghai Jiaotong University, 2012, 46(05): 756-761.

参考文献

［1］赵永奎. 美国军用航空通信、导航、识别综合技术发展评述［J］. 电子工程信息, 2005 (4):614.

ZHAO Yongkui. U.S. military aeronautical communication, navigation, identification integrated technology development comments ［J］. Electronic Engineering Information, 2005 (4):614.

［2］雷军，曹顺安，孙艳. 武装直升机航空电子系统发展趋势［J］. 现代兵器, 2000 (7):1315.

LEI Jun, CAO Shunan, SUN Yan. Development trends of armed helicopter avionics system ［J］. Modern weapons, 2000 (7):1315.

［3］陈颖, 王春蓉. 从复杂系统观点看国外IMA发展的经验及教训［J］. 电讯技术, 2010, 50 (2): 106110.

CHEN Ying, WANG Chunrong. Experience and lessons of foreign countries in integrated modular avionics from complex system views ［J］. Telecommunication Engineering, 2010, 50 (2): 106110.

［4］Jeff D. Apache, highspeed data bus ［C］ //AHS57th Annual Forum. Washington DC: Japan Aerospace Exploration Agency, 2001:105111.

［5］Eric K. Operation’s manual for helicopter, attack, AH64A apache ［M］. Washington DC: Headquarters Department of the Army, 1994: 133134.

［6］Petra P. TTTech delivers distributed IMA test bed with TTEthernet to sikorskv aircraft ［EB/OL］. ［20110601］. http://www.tttech.com, 2010.

［7］Wolfig R, Jakovljevic M. Distributed IMA and DO297: Architectural, communication and certification attributes ［C］ //27th Digital Avionics Systems Conference (DASC). USA: IEEE/AIAA, 2008: 26.

［8］周强, 熊华钢. 新一代民机航空电子互连技术发展［J］. 电光与控制, 2009, 16 (4): 16.

ZHOU Qiang, XIONG Huagang. Development of the new generation civil avionic interconnection technology ［J］. Electronics Optics and Control, 2009, 16 (4): 16.

［9］Eric K, Charles L. The JTRS program: Software defined radios as a software product line ［C］ //10th International Software Product Line Conference. Baltimore: IEEE Computer Society, 2006: 23.

［10］李雅萍, 杨尚森, 李阳. CORBA技术在SCA系统中的应用［J］. 计算机工程与设计, 2008, 29 (16): 42004203, 4206.

LI Yaping, YANG Shangsen, LI Yang. Application of CORBA technology for SCA system ［J］. Computer Engineering and Design, 2008, 29 (16): 42004203, 4206.

［11］和欣, 张晓林, 韩松. 开放式网络化航空电子综合CNI模块化前端的系统设计［J］. 遥测遥控, 2009 (4): 5663.

HE Xin, ZHANG Xiaolin, HAN Song. System design of integrated CNI modular frontend in netcentric open avionics ［J］. Telemetry, Tracking and Command, 2009 (4): 5663.

[1]	王聚团, 戚晓宁, 黄志明. 水下生产管汇测试技术及其改进研究[J]. 海洋工程装备与技术, 2022, 9(2): 43-49.
[2]	袁振钦, 邹科, 孙亚峰, 刘刚, 屈衍, 李居跃. 基于时域分析法的动态电缆疲劳分析[J]. 海洋工程装备与技术, 2022, 9(2): 50-55.
[3]	王娟, 杨明旺, 郑茂尧, 刘凌云, 赵立君. 高强钢在大型半潜式平台组块建造中的应用[J]. 海洋工程装备与技术, 2022, 9(1): 27-31.
[4]	陈欣, 赵晓磊, 王立坤, 肖德明, 张腾月. 深水大型吸力锚建造技术研究[J]. 海洋工程装备与技术, 2022, 9(1): 32-36.
[5]	尹彦坤, 易涤非. 半潜式生产平台船体结构关键节点工程临界评估[J]. 海洋工程装备与技术, 2022, 9(1): 52-57.
[6]	MA Qunsheng (马群圣), CEN Xingxing (岑星星), YUAN Junyi (袁骏毅), HOU Xumin (侯旭敏). Word Embedding Bootstrapped Deep Active Learning Method to Information Extraction on Chinese Electronic Medical Record[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 494-502.
[7]	ZHANG Shengfa (张胜发), TANG Na (唐纳), SHEN Guofeng (沈国峰), WANG Han (王悍), QIAO Shan (乔杉). Universal Software Architecture of Magnetic Resonance-Guided Focused Ultrasound Surgery System and Experimental Study[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 471-481.
[8]	安庆升, 孙立东, 武秋生. 碳纤维增强复合材料发射筒设计研究[J]. 空天防御, 2021, 4(2): 13-.
[9]	KONG Xiangqiang (孔祥强), MENG Xiangxi (孟祥熙), LI Jianbo (李见波), SHANG Yanping (尚燕平), CUI Fulin (崔福林) . Comparative Study on Two-Stage Absorption Refrigeration Systems with Different Working Pairs[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 155-162.
[10]	ZHUANG Weimin (庄蔚敏), WANG Pengyue (王鹏跃), AO Wenhong (熬文宏), CHEN Gang (陈刚) . Experiment and Simulation of Impact Response of Woven CFRP Laminates with Different Stacking Angles[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 218-230.
[11]	ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉). Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 1-9.
[12]	HUANG Ningning (黄宁宁), MA Yixin (马艺馨), ZHANG Mingzhu (张明珠), GE Hao (葛浩), WU Huawei (吴华伟). Finite Element Modeling of Human Thorax Based on MRI Images for EIT Image Reconstruction[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 33-39.
[13]	WANG Xianjin, GAO Xu, YU Kuigang . Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 706-713.
[14]	QIAO Xing, MA Dan, YAO Xuliang, FENG Baolin. Stability and Numerical Analysis of a Standby System[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 769-778.
[15]	WU Jin, MIN Yu, YANG Xiaodie, MA Simin . Micro-Expression Recognition Algorithm Based on Information Entropy Feature[J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(5): 589-599.