考虑内坑影响的坑中坑基坑被动土压力叠加算法

摘要/Abstract

摘要： 以Coulomb土压力理论为基础，考虑内坑的影响，采用叠加原理分析坑中坑基坑的外坑被动土压力，根据滑裂楔体的不同形状，分别给出4种具体计算公式，并通过具体算例对比了本文算法与《上海市基坑工程技术规范》中推荐算法的计算结果.结果表明：内坑的存在，将降低坑中坑基坑的外坑被动土压力；如果以《上海市基坑工程技术规范》中推荐的算法为理论依据设计坑中坑基坑，将会高估基坑的稳定性而使设计偏于危险.

关键词: , 坑中坑, 内坑, 被动土压力, 力矩叠加法

Abstract: The concerning passive pressure was analyzed based on Coulomb soil pressure theory and superposition principle. According to different shapes of slide wedges, four analytical models and formulas were proposed respectively. The mechanical results calculated by the method in this paper and that of Shanghai technical code for excavation engineering were compared, which demonstrates that the existence of inner pit will greatly reduce the passive pressure of outer one while the design based on Shanghai technical code for excavation engineering will lead to overestimating stability of pitinpit excavation.

Key words: pit-in-pit, inner pit, passive earth pressure, moment superposition

中图分类号:

TU 443

申明亮, 廖少明, 邵伟. 考虑内坑影响的坑中坑基坑被动土压力叠加算法[J]. 上海交通大学学报（自然版）, 2012, 46(01): 79-83.

SHEN Ming-Liang, LIAO Shao-Ming, SHAO Wei. Superposition Algorithm for the Outer Pit Passive Earth Pressure Influenced by Inner Pit for Pit-in-Pit[J]. Journal of Shanghai Jiaotong University, 2012, 46(01): 79-83.

参考文献

［1］龚晓南. 关于基坑工程的几点思考［J］. 土木工程学报, 2005, 38(9): 99102.

GONG Xiaonan. Constructions on foundation pit engineering［J］. China Civil Engineering Journal, 2005, 38(9): 99102.

［2］吴铭炳. 坑中坑基坑支护设计与监测［J］. 岩土工程学报, 2006, 28(S1): 15701572.

WU Mingbing. Design and monitoring of retaining of pits in foundationpit［J］. Chinese Journal of Geotechnical Engineering, 2006, 28(S1): 15701572.

［3］金立坚, 王志刚. “坑中坑”——高低跨深浅坑异形区间隧道的基坑施工技术［J］. 建筑施工, 2005, 27(9): 57.

JIN Lijian, WANG Zhigang. “Pitinpit”——Construction technique for tunnel foundation pit with different span depth and irregular shaped route ［J］. China Building Construction, 2005, 27(9): 57.

［4］申明亮, 廖少明, 周小华, 等. 坑中坑基坑应力场的参数化分析［J］. 岩土工程学报, 2010, 30(S2): 187191.

SHEN Mingliang, LIAO Shaoming, ZHOU Xiaohua, et al. Parametric analysis on stress field of pit in pit excavation［J］. Chinese Journal of Geotechnical Engineering, 2010, 30 (S2): 187191.

［5］马平, 秦四清, 钱海涛. 有限土体主动土压力计算［J］. 岩石力学与工程学报, 2008, 27(S1): 30703074.

MA Ping, QIN Siqing, QIAN Haitao. Calculation of active earth pressure for limited soils［J］. Chinese Journal of Rock Mechanics and Engineering, 2008, 27(S1): 30703074.

［6］高印立. 有限土体土压力的计算探讨［J］. 建筑科学, 2000, 16(5): 5356.

GAO Yinli. The calculation of finite earth pressure［J］. China Building Science, 2000, 16(5): 5356.

［7］高印立. 极限分析法计算有限范围土体土压力［J］. 建筑结构, 2001, 31(8): 6668.

GAO Yinli. Calculation of finite earth pressure with limit analysis method［J］. China Building Structure, 2001, 31(8): 66–68.

［8］王文杰, 曾进群, 陈小丹. 深基坑开挖中有限土体土压力计算方法探讨［J］. 岩土工程界, 2005, 8(3): 3031.

WANG Wenjie, ZENG Jinqun, CHEN Xiaodan. Calculation of finite earth pressure of deep foundation pit［J］. Geotechnical Engineering World, 2005, 8(3): 3031.

［9］刘发前, 王建华. 非均匀堆载作用下圆形基坑主动土压力分析［J］. 上海交通大学学报, 2006, 40(12): 21432146.

LIU Faqian, WANG Jianhua. The active earth pressure of circular pit subjected to nonuniform surcharge loading［J］. Journal of Shanghai Jiaotong University, 2006, 40(12): 21432146.

［10］金亚兵, 刘吉波. 相邻基坑土条土压力计算方法探讨［J］. 岩土力学, 2009, 30(12): 37593764.

JIN Yabin, LIU Jibo. Discussion on calculation method of earth pressure of earthstrip between neighboring excavations［J］. Chinese Journal of Rock and Soil Mechanics, 2009, 30 (12): 37593764.

［11］DG/TJ0861—2010, 上海市基坑工程技术规范［S］.

[1]	王聚团, 戚晓宁, 黄志明. 水下生产管汇测试技术及其改进研究[J]. 海洋工程装备与技术, 2022, 9(2): 43-49.
[2]	袁振钦, 邹科, 孙亚峰, 刘刚, 屈衍, 李居跃. 基于时域分析法的动态电缆疲劳分析[J]. 海洋工程装备与技术, 2022, 9(2): 50-55.
[3]	王娟, 杨明旺, 郑茂尧, 刘凌云, 赵立君. 高强钢在大型半潜式平台组块建造中的应用[J]. 海洋工程装备与技术, 2022, 9(1): 27-31.
[4]	陈欣, 赵晓磊, 王立坤, 肖德明, 张腾月. 深水大型吸力锚建造技术研究[J]. 海洋工程装备与技术, 2022, 9(1): 32-36.
[5]	尹彦坤, 易涤非. 半潜式生产平台船体结构关键节点工程临界评估[J]. 海洋工程装备与技术, 2022, 9(1): 52-57.
[6]	MA Qunsheng (马群圣), CEN Xingxing (岑星星), YUAN Junyi (袁骏毅), HOU Xumin (侯旭敏). Word Embedding Bootstrapped Deep Active Learning Method to Information Extraction on Chinese Electronic Medical Record[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 494-502.
[7]	ZHANG Shengfa (张胜发), TANG Na (唐纳), SHEN Guofeng (沈国峰), WANG Han (王悍), QIAO Shan (乔杉). Universal Software Architecture of Magnetic Resonance-Guided Focused Ultrasound Surgery System and Experimental Study[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 471-481.
[8]	安庆升, 孙立东, 武秋生. 碳纤维增强复合材料发射筒设计研究[J]. 空天防御, 2021, 4(2): 13-.
[9]	KONG Xiangqiang (孔祥强), MENG Xiangxi (孟祥熙), LI Jianbo (李见波), SHANG Yanping (尚燕平), CUI Fulin (崔福林) . Comparative Study on Two-Stage Absorption Refrigeration Systems with Different Working Pairs[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 155-162.
[10]	ZHUANG Weimin (庄蔚敏), WANG Pengyue (王鹏跃), AO Wenhong (熬文宏), CHEN Gang (陈刚) . Experiment and Simulation of Impact Response of Woven CFRP Laminates with Different Stacking Angles[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 218-230.
[11]	ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉). Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 1-9.
[12]	HUANG Ningning (黄宁宁), MA Yixin (马艺馨), ZHANG Mingzhu (张明珠), GE Hao (葛浩), WU Huawei (吴华伟). Finite Element Modeling of Human Thorax Based on MRI Images for EIT Image Reconstruction[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 33-39.
[13]	WANG Xianjin, GAO Xu, YU Kuigang . Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 706-713.
[14]	QIAO Xing, MA Dan, YAO Xuliang, FENG Baolin. Stability and Numerical Analysis of a Standby System[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 769-778.
[15]	WU Jin, MIN Yu, YANG Xiaodie, MA Simin . Micro-Expression Recognition Algorithm Based on Information Entropy Feature[J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(5): 589-599.