上海交通大学学报(自然版)

• 一般工业技术 • 上一篇    下一篇

SiCp/Mg-Zn-Zr复合材料的制备及其阻尼性能

潘安霞,马立群,张平,夏明六,程江辉,丁毅   

  1. (南京工业大学 材料科学与工程学院,南京 210009)
  • 收稿日期:2009-05-10 修回日期:1900-01-01 出版日期:2010-05-31 发布日期:2010-05-31

Preparation and Damping Capacities of SiCp/Mg-Zn-ZrComposites

PAN Anxia,MA Liqun,ZHANG Ping,XIA Mingliu,CHENG Jianghui,DING Yi   

  1. (College of Materials Science and Engineering, Nanjing University of Technology, Nanjing 210009, China)
  • Received:2009-05-10 Revised:1900-01-01 Online:2010-05-31 Published:2010-05-31

摘要: 采用搅拌铸造法制备SiC颗粒增强Mg-Zn-Zr复合材料,并分析了Mg-Zn-Zr复合材料的压缩强度和内耗与SiC粒度的关系.结果表明:加入粒度10 μm的SiC颗粒,可使基体合金的压缩强度增加;SiC粒度为20 μm的复合材料阻尼性能优于SiC粒度为10和50 μm的复合材料.

关键词: 镁基复合材料, SiC颗粒, 阻尼性能, 位错

Abstract: SiC particulate reinforced Mg-Zn-Zr composites were prepared by stir casting. The relationship of the compressive strength and the damping capacities of SiCp/Mg-Zn-Zrcomposites to the size of SiC particles was investigated. The results show that the compressive strength of the magnesium matrix composites can be improved when the SiC particles with an average size of 10 μm are added. The damping capacities of the composites with an average SiC particles size of 20 μm are better than those of the other composites.

中图分类号: