[1] |
刘霞,谭国焕,王大国. 基于边界造波法的二阶Stokes波的数值生成[J]. 辽宁工程技术大学学报(自然科学), 2010, 29(1): 107-111.
|
|
LIU Xia, TAN Guohuan, WANG Daguo. Numerical simulation of second-order stokes based on wave-generation method of defining inlet boundary conditions[J]. Journal of Liaoning Technical University (Natural Science), 2010, 29(1): 107-111.
|
[2] |
王永学. 无反射造波数值波浪水槽[J]. 水动力学研究与进展,1994, 9(2): 205-213.
|
|
WANG Yongxue. Numerical wave making tank without wave reflection[J]. Journal of Hydrodynamics, 1994, 9(2): 205-213.
|
[3] |
WEI G, KIRBY J T, SINHA A. Generation of waves in Boussinesq models using a source function method[J]. Coastal Engineering, 1998, 36(4): 271-299.
|
[4] |
HARLOW F H, WELCH J E. Numerical calculation of time-dependent viscous incompressible flow of fluid with free surface[J]. Physics of Fluids, 1965, 8(12): 2182-2189.
|
[5] |
HIRT C W, NICHOLS B D. Volume of fluid method for the dynamics of free boundaries[J]. Journal of Computational Physics, 1981, 39(1): 201-225.
|
[6] |
ROENBY J, BREDMOSE H, JASAK H. A computational method for sharp interface advection[J]. Royal Society Open Science, 2016, 3(11): 160405.
|
[7] |
HATAYAMA S. Comparison of effectiveness of four open boundary conditions for incompressible unbounded flows[J]. Technical Report of National Aerospace Laboratory, 1998: 1-28.
|
[8] |
CLEMENT A. Coupling of two absorbing boundary conditions for 2D time-domain simulations of free surface gravity waves[J]. Journal of Computational Physics, 1996, 126(1): 139-151.
|
[9] |
JACOBSEN N G, FUHRMAN D R, FREDSOE J. A wave generation toolbox for the open-source CFD library: OpenFoam[J]. International Journal for Numerical Methods in Fluids, 2012, 70(9): 1073-1088.
|
[10] |
CHEN L F, ZANG J, HILLIS A J, et al. Numerical investigation of wave-structure interaction using OpenFOAM[J]. Ocean Engineering, 2014, 88: 91-109.
|
[11] |
JENSEN B, JACOBSEN N G, CHRISTENSEN E D. Investigations on the porous media equations and resistance coefficients for coastal structures[J]. Coastal Engineering, 2014, 84: 56-72.
|
[12] |
王东旭. 基于OpenFOAM的数值波浪水槽的开发与应用[D]. 大连: 大连海洋大学,2018.
|
|
WANG Dongxu. Research and development of numerical wave tank based on OpenFOAM[D]. Dalian: Dalian Maritime University, 2018.
|
[13] |
ALBADAWI A, DONOGHUE D, ROBINSON A J, et al. Influence of surface tension implementation in volume of fluid and coupled volume of fluid with level set methods for bubble growth and detachment[J]. International Journal of Multiphase Flow, 2013, 53: 11-28.
|
[14] |
SOUTO-IGLESIAS A, BULIAN G, BITA-VERA E. A set of canonical problems in sloshing. Part 2: Influence of tank width on impact pressure statistics in regular forced angular motion[J]. Ocean Engineering, 2015, 105: 136-159.
|
[15] |
BERBEROVIC E, VAN HINSBERG N, JAKIRLIC S, et al. Drop impact onto a liquid layer of finite thickness: Dynamics of the cavity evolution[J]. Physical Review E, 2009, 79 (3): 036306.
|
[16] |
BRECHT D, PIETER R, PETER T. Application of a buoyancy-modified k-ω SST turbulence model to simulate wave run-up around a monopole subjected to regular waves using OpenFOAM[J]. Coastal Engineering, 2017, 125: 81-94.
|
[17] |
BRECHT D, PETER T, PIETER R. Performance of a buoyancy-modified k-ω and k-ω SST turbulence model for simulating wave breaking under regular waves using OpenFOAM[J]. Coastal Engineering, 2018, 138: 49-65.
|