上海交通大学学报 ›› 2017, Vol. 51 ›› Issue (7): 812-818.doi: 10.16183/j.cnki.jsjtu.2017.07.007
赵大刚1,郭春雨1,苏玉民1,豆鹏飞2,景涛1,张海鹏1
发布日期:
2017-07-31
基金资助:
ZHAO Dagang1,GUO Chunyu1,SU Yumin1
DOU Pengfei2,JING Tao1,ZHANG Haipeng1
Published:
2017-07-31
Supported by:
摘要: 针对L型吊舱推进器的结构特点自行研发了一套水动力性能测量装置,并利用船模拖曳水池实验室对其敞水性能进行了试验研究.试验测量了直航状态下进速系数在0~1.3内的螺旋桨推力、转矩以及吊舱推进器单元整体的推力和侧向力等相关性能,并对3个不同进速系数下L型吊舱推进器以0.1396rad/s的操舵速率进行动态操舵时的螺旋桨及吊舱整体的水动力性能与静态操舵时的水动力性能进行对比.研究发现,右旋桨L型吊舱推进器在向右动态操舵时螺旋桨整体上的推力要较静态操舵状态的大,而转矩偏小,吊舱单元整体受力变化较为复杂.
中图分类号:
赵大刚1,郭春雨1,苏玉民1,豆鹏飞2,景涛1,张海鹏1. L型吊舱推进器直航及操舵工况水动力性能试验研究[J]. 上海交通大学学报, 2017, 51(7): 812-818.
ZHAO Dagang1,GUO Chunyu1,SU Yumin1 DOU Pengfei2,JING Tao1,ZHANG Haipeng1. Experimental Study of LType Podded Propulsors in
Straight Forward Motion and Azimuthing Conditions[J]. Journal of Shanghai Jiao Tong University, 2017, 51(7): 812-818.
[1]沈兴荣, 蔡跃进, 蔡荣泉, 等. 吊舱式推进器水动力性能研究综述[J]. 船舶力学, 2011, 15(1): 189197. SHEN Xingrong, CAI Yuejin, CAI Rongquan, et al. Summarization of hydrodynamics performance study of podded propulsor[J]. Journal of Ship Mechanics, 2011, 15(1): 189197. [2]PALM M, JRGENS D, BENDL D. Numerical and experimental study on ventilation for azimuth thrusters and cycloidal propellers[C]∥Proceedings of the Second International Symposium on Marine Propulsors. SMP’11 Hamburg, Germany: Hamburg University of Technology, 2011: 491498. [3]ISLAM M, RYAN R, MOLYNUEX D. Numerical and experimental research on a podded propulsor [C]∥Proceedings of the ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering. San Francisco, California, USA: OMAE, 2014: 110. [4]ISLAM M, VEITCH B, LIU P. Uncertainty of measurements of podded propulsor performance characteristics[J]. Ocean Engineering, 2014, 81(2): 130138. [5]曹梅亮, 王根禄, 朱鸣. 吊舱式推进装置水动力性能试验研究[J]. 上海交通大学学报, 2003, 37(8): 11981200. CAO Meiliang, WANG Genlu, ZHU Ming. Experimental investigations on the hydrodynamic performance of podded propulsors [J]. Journal of Shanghai Jiao Tong University, 2003, 37(8): 11981200. [6]熊鹰, 盛立, 杨勇. 吊舱式推进器偏转工况下水动力性能[J]. 上海交通大学学报, 2013, 47(6): 956961. XIONG Ying, SHENG Li, YANG Yong. Hydrodynamics performance of podded propulsion at declination angles[J]. Journal of Shanghai Jiao Tong University, 2013, 47(6): 956961. [7]贺伟, 陈克强, 李子如. 串列式吊舱推进器操舵工况水动力试验研究[J]. 华中科技大学学报(自然科学版), 2015(1): 107111. HE Wei, CHEN Keqiang, LI Ziru. Experimental research on propulsor in hydrodynamics of tandem podded azimuthing conditions[J]. Journal of Huazhong University of Science and Technology (Nature Science Edition), 2015(1): 107111. [8]杨晨俊, 钱正芳, 马骋. 吊舱对螺旋桨水动力性能的影响[J]. 上海交通大学学报, 2003, 37(8): 12291233. YANG Chenjun, QIAN Zhengfang, MA Cheng. Influences of pod on the propeller performance[J]. Journal of Shanghai Jiao Tong University, 2003, 37(8): 12291233. [9]SHAMSI R, GHASSEMI H. Numerical investigation of yaw angle effects on propulsive characteristics of podded propulsors[J]. International Journal of Naval Architecture & Ocean Engineering, 2014, 5(2): 287301. [10]SHAMSI R, GHASSEMI H. Timeaccurate analysis of the viscous flow around puller podded drive using sliding mesh method[J]. Journal of Fluids Engineering, 2015, 137(1): 19. [11]SHAMSI R, GHASSEMI H. Hydrodynamic analysis of puller and pusher of azimuthing podded drive at various yaw angles[J]∥Journal of Engineering for the Maritime Environment, 2014, 228(1):5569. [12]郭春雨, 孙瑜, 赵大刚, 等. 变安装角推力鳍对吊舱推进器敞水性能的影响[J]. 华中科技大学学报(自然科学版), 2013, 41(12): 106111. GUO Chunyu, SUN Yu, ZHAO Dagang, et al. Influence of thrust fins with different installation angles on open water performance of podded propulsor[J]. Journal of Huazhong University of Science and Technology (Nature Science Edition), 2013, 41(12): 106111. [13]董小倩, 杨晨俊. 吊舱推进器桨毂间隙影响的数值分析[J]. 上海交通大学学报, 2013, 47(6): 938942. DONG Xiaoqian, YANG Chenjun. CFD study of hub gap effect on podded propulsor performance[J]. Journal of Shanghai Jiao Tong University, 2013, 47(6): 938942. |
[1] | 赵子任1, 杜世昌1, 黄德林1, 任斐2, 梁鑫光2. 多工序制造系统暂态阶段产品质量#br# 马尔科夫建模与瓶颈分析[J]. 上海交通大学学报, 2017, 51(10): 1166-1173. |
[2] | 周鹏辉, 马红占, 陈东萍, 陈梦月, 褚学宁. 基于模糊随机故障模式与影响分析的#br# 产品再设计模块识别[J]. 上海交通大学学报, 2017, 51(10): 1189-1195. |
[3] | 李昌玺1, 2, 周焰1, 林菡3, 李灵芝1, 郭戈1. 基于MIMOFNN模型的弹道导弹目标#br# 时空序贯融合识别方法[J]. 上海交通大学学报, 2017, 51(9): 1138-. |
[4] | 冯明月, 何明浩, 韩俊, 郁春来. 基于协方差拟合旋转不变子空间信号参数#br# 估计算法的高分辨到达角估计[J]. 上海交通大学学报, 2017, 51(9): 1145-. |
[5] | 杨平1,盛杰1,王禹程2,李柱永1,金之俭1,洪智勇1. YBa2Cu3O7δ超导带材非均匀性 对失超传播特性的影响[J]. 上海交通大学学报(自然版), 2017, 51(9): 1090-1096. |
[6] | 王星, 周一鹏, 田元荣, 陈游, 周东青, 贺继渊. 基于改进遗传算法和SinChirplet原子的调频#br# 雷达信号稀疏分解[J]. 上海交通大学学报, 2017, 51(9): 1124-1130. |
[7] | 张良俊1, 2, 李晓慈1, 吴静怡1, 蔡爱峰1. 大型空间展开机构微重力环境模拟#br# 悬吊装置热结构耦合分析[J]. 上海交通大学学报, 2017, 51(8): 954-961. |
[8] | 夏海亮1, 2, 刘亚坤1, 2, 刘全桢3, 刘宝全3, 傅正财1, 2. 长持续时间雷电流分量作用下电极形状#br# 对金属烧蚀特性的影响[J]. 上海交通大学学报, 2017, 51(8): 903-908. |
[9] | 谷家扬, 谢玉林, 陶延武, 黄祥宏, 吴介. 新型浮式钻井生产储油平台#br# 涡激运动数值模拟及试验研究 [J]. 上海交通大学学报, 2017, 51(7): 878-885. |
[10] | 林达, 朱益佳, 魏小栋, 王志宇, 张武高. 喷油参数对聚甲氧基二甲醚/柴油发动机燃烧及其#br# 颗粒物排放的影响[J]. 上海交通大学学报, 2017, 51(7): 787-795. |
[11] | 孟庆阳1, 阎威武1, 胡勇1, 程建林1, 陈世和2, 张曦2. 基于子空间方法的超超临界机组#br# 过热蒸汽系统模型辨识[J]. 上海交通大学学报, 2017, 51(6): 672-678. |
[12] | 蒋华军a, 蔡艳a, b, 李超豪a, 李芳a, b, 华学明a, b. 基于改进Sobel算法的焊缝X射线图像#br# 气孔识别方法[J]. 上海交通大学学报, 2017, 51(6): 665-671. |
[13] | 董冠华,殷勤,殷国富,向召伟. 机床结合部耦合动刚度的辨识与建模[J]. 上海交通大学学报(自然版), 2015, 49(09): 1263-1434. |
[14] | 谢启江,余海东. 硬岩掘进机刀盘载荷与撑靴接触界面刚度的耦合关系[J]. 上海交通大学学报(自然版), 2015, 49(09): 1269-1275. |
[15] | 仲健林1,马大为1,任杰1,李士军2,王旭3. 基于平面应变假设的橡胶圆筒静态受压分析[J]. 上海交通大学学报(自然版), 2015, 49(09): 1276-1280. |
阅读次数 | ||||||||||||||||||||||||||||||||||||||||||||||||||
全文 91
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||
摘要 1066
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||