感应回火对冷成形高强度钢方管力学特性的影响

摘要/Abstract

摘要：

针对直接冷弯成形工艺制备的高强度钢方管出现弯角力学性能下降、冷作硬化效应明显和残余应力集中等问题，提出了在线局部感应回火工艺.该工艺有效解决了冷成形高强度钢方管角部缺陷问题，并发现不同感应回火温度对弯角力学性能有较大的影响.结果表明：当回火温度在650 ℃时，方管弯角处强度和延伸率与原材料性能接近，在酸洗压扁实验中的压下量超过方管对角线1/2仍没有裂纹出现，残余应力大小和分布也得到一定程度的改善；当回火温度为700 ℃时，高强度钢方管弯角强度开始降低，热影响区变大，残余应力分布异常.

关键词:

高强度钢方管；冷成形；局部感应回火；力学特性

Abstract:

For the problems caused in the coldformed process at corners of high strength steel square tube, i.e. poor mechanical properties, severe hardening and residual stress concentration, a local induction tempering process online was proposed. This process could effectively solve the problems of corner defects of coldformed high strength steel square tube. The study found that the different tempering temperatures had a great impact on the mechanical properties of the bending angle. The results showed that the strength and elongation of the tempering square tube were almost the same as those of the vigor material at tempering temperature of 650℃. There was no crack when the displacement distance was larger than 1/2 of diagonal length at flattening test. The magnitude and distribution of the residual stresses had also been improved to some extent. As the tempering temperature was 700℃, the strength of the high strength steel square tube decreased, the heat affected zone became larger, and the distribution of the residual stresses got abnormal.

Key words:

high strength steel square tube；coldformed；local induction tempering；mechanical property

中图分类号:

TG 142

彭雪锋1，韩静涛1，刘靖1，晏培杰2. 感应回火对冷成形高强度钢方管力学特性的影响[J]. 上海交通大学学报, 2017, 51(4): 438-.

PENG Xuefeng1，HAN Jingtao1，LIU Jing1，YAN Peijie2. Effect of Induction Tempering on Mechanical Properties of#br# ColdFormed High Strength Steel Square Tube[J]. Journal of Shanghai Jiao Tong University, 2017, 51(4): 438-.

参考文献

［1］MULLER M, BARRANS S M, BLUNT L. Predicting plastic deformation and work hardening during Vband formation ［J］. Journal of Materials Processing Technology, 2011, 211(4): 627636.
［2］晁灿，赵亦希，康稳，等.QSTE700型冷弯高强度高方管的冷作硬化效应［J］. 上海交通大学学报, 2014, 48(5): 605609.
CHAO Can, ZHAO Yixi, KANG Wen, et al. Strain in hardening effect of QSTE700 coldformed high strength steel square tube ［J］. Journal of Shanghai Jiao Tong University, 2014, 48(5): 605609.
［3］MA J, CHAN T, YOUNG B. Material properties and residual stresses of coldformed high strength steel hollow sections ［J］. Journal of Constructional Steel Research, 2015， 109： 152165.
［4］HUANG S, ZHAO Y, HE C. Shear fracture of advanced high strength steels ［J］. Journal of Iron and Steel Research, 2014, 21(10): 938944.
［5］LEE J, KIM J H, LEE M G, et al. Properties controlling the bendassisted fracture of AHSS ［J］. International Journal of Plasticity, 2015， 75： 100120.
［6］常颖，盈亮，靳菲，等.回火工艺对热成形AHSS力学特性的影响［J］.材料热处理学报, 2013, 34(11): 7478.
CHANG Ying, YING Liang, JIN Fei, et al. Effect of tempering treatment process on mechanical properties of hotstamping AHSS alloy ［J］. Transactions of Materials and Heat Treatment, 2013, 34(11): 7478.
［7］陈林恒，康永林，黎先浩，等.回火温度对600 MPa级低碳贝氏体钢组织和力学性能的影响［J］.北京科技大学学报, 2009(8)： 983987.
CHEN Linheng, KANG Yonglin, LI Xianhao, et al. Effect of tempering temperature on the microstructure and mechanical properties of 600 MPa grade low carbon bainitic steel ［J］. Journal of University of Science and Technology Beijing, 2009(8): 983987.
［8］KRAUSS G, THOMPOSON T W. Ferritic microstructure in continuously cooled low and ultralow carbon steels［J］. ISIJ International, 1995, 35(8): 937945.
［9］YANG S W, SHANG C J, HE X L. Stability of ultrafine microstructures during tempering ［J］. Journal of University of Science and Technology Beijing, 2001, 8(3): 119122.
［10］EOM J G, SON Y H, JEONG S W, et al. Effect of strain hardening capability on plastic deformation behaviors of material during metal forming ［J］. Materials & Design, 2014, 54(2): 10101018.

[1]	陈玉喜1，刘亮2，张华军2，陈华斌1，陈善本1. 焊接热输入对低合金高强钢焊缝组织和韧性的影响[J]. 上海交通大学学报（自然版）, 2015, 49(03): 306-309.
[2]	齐丽华1, 张伟卫1, 刘小峰2, 吉玲康1, 池强1, 熊庆人1. 高强度管线钢的原位拉伸形变分析 [J]. 上海交通大学学报（自然版）, 2012, 46(09): 1455-1460.
[3]	汤禹成,徐栋恺,陈军. 高强度钢板复杂零件的冲压压边圈拓扑优化[J]. 上海交通大学学报（自然版）, 2010, 44(01): 6-0010.
[4]	只悦胜,胡成亮,赵震,李世龙. 20CrMnTiH本构模型的建立及验证[J]. 上海交通大学学报（自然版）, 2013, 47(11): 1697-1701.
[5]	董洪波，余新平，章威. Q550D超低碳贝氏体钢的微观组织模拟[J]. 上海交通大学学报（自然版）, 2015, 49(01): 67-73.
[6]	张威1,2，王小威1,2,3，姜勇1,2，黄鑫1,2，巩建鸣1,2，翁晓祥1,2. 基于多损伤参量的P92钢蠕变变形模拟[J]. 上海交通大学学报, 2017, 51(8): 1013-1017.
[7]	王军1，刘莹1,2. 316L不锈钢钝化膜的耐腐蚀性和血液相容性[J]. 上海交通大学学报, 2018, 52(5): 593-598.