工作水深对浮式平台波浪砰击影响的敏感性分析

摘要/Abstract

摘要：

运用风洞和水池试验结果修正后的数值模型，同时考虑平台承受的风、浪、流环境载荷，及全尺度锚泊系统，以一典型半潜式平台为例，利用ANSYSAQWA软件对半潜式平台波浪砰击次数和砰击载荷进行了非线性数值分析.在300、400和500m工作水深，45°、90°和180° 3个载荷方向上建立9个工况，以及每个工况下的10个子工况，利用挪威船级社规范，研究了工作水深对平台的波浪砰击次数和砰击载荷影响的敏感性.针对各工况中的10个子工况结果，以90%的Gumble分布值作为最终的平台气隙的结果.通过数值模拟研究表明：相同的环境载荷、锚链类型和预紧力的情况下，平台的工作水深对平台气隙和波浪砰击的影响非常敏感.因此，在平台设计过程中应充分考虑工作水深对平台气隙和波浪砰击的影响.

关键词:

半潜式平台；工作水深；气隙；波浪砰击

Abstract:

According to a typical example of semisubmersible platform, the air gap of platform has been studied through the numerical model tuned and validated by the tank and wind tunnel test results with ANSYSAQWA. The wind, wave and current loads are simulated simultaneously. Meanwhile, the effect of the full scale mooring system has been simulated. In the 300, 400 and 500m water depth, the sensitivity of wave slamming with respect to water depth has been studied based on the Det Norske Veritas (DNV) specification in 45°, 90° and 180° load directions through 9 cases and their 90 subcases. The 90% Gumble distributions for the 10 subcases of each case are chosen as the final results of the air gap. It is found that the results are obviously sensitive for the air gap and wave slamming through the same environment condition, mooring line type and pretension. Therefore, the water depth should be considered for the analysis of air gap and wave slamming in the design progress for engineering project.

Key words:

semisubmersible platform; operating water depth; air gap; wave slamming

中图分类号:

P 751

霍发力1，张健1，杨德庆2. 工作水深对浮式平台波浪砰击影响的敏感性分析[J]. 上海交通大学学报, 2017, 51(4): 410-.

HUO Fali1，ZHANG Jian1，YANG Deqing2. Sensitivity Study of Wave Slamming with Respect to#br# Water Depth for Floating Platform[J]. Journal of Shanghai Jiao Tong University, 2017, 51(4): 410-.

参考文献

［1］KAZEMI S, INCECIK A. Theoretical and experiment analysis of air gap response and waveondeck impact of floating offshore structures［C］∥Proceedings of the 26th International Conference on Offshore Mechanics and Arctic Engineering. San Diego, California, USA: OMAE, 2007: 297304.
［2］LIANG Xiufeng, YANG Jianmin, XIAO Longfei, et al. Numerical study of air gap response and wave impact load on a moored semisubmersible platform in predetermined irregular wave train［C］∥Proceedings of the ASME 2010 29th International Conference on Ocean, Offshore and Arctic Engineering. Shanghai: OMAE. 2010: 110.
［3］SWEETMAN B, WINTERSTEIN S R. Air gap prediction: Use of secondorder diffraction and multicolumn models［C］∥Proceedings of the Fourteenth International Offshore and Polar Engineering Conference. Stavanger, Norway: IOPEC, 2001: 390397.
［4］MATSUMTO F T, WATAI R A, SIMOS A N. Wave runup and air gap prediction for a largevolume semisubmersible platform［C］∥Proceedings of the 29th International Conference on Offshore Mechanics and Arctic Engineering. Shanghai: OMAE, 2010: 151159.
［5］霍发力. 水深对半潜式平台水动力性能及波浪载荷的影响［J］.船舶工程, 2014, 36(6):100104.
HUO Fali. Influence of water depth on hydrodynamic performance and wave load of semisubmersible platform ［J］. Ship Engineering, 2014, 36(6):100104.
［6］ANDERSEN P. Ship motions and sea loads in restricted water depth［J］. Ocean Engineering, 1979 (6): 557569.
［7］XIAO Longfei, YANG Jianmin, LI Xin. Shallow water effects on surge motion and load of soft yoke mooring FPSO［J］. China Ocean Engineering, 2007, 21(2): 187196.
［8］谢永和，李润培，杨建民. 水深对超大型FPSO波浪载荷响应影响实验研究［J］. 海洋工程， 2005， 23(3):16.
XIE Yonghe, LI Runpei, YANG Jianmin. Experimental study on the effects of water depth on waveinduced loads response of a very large FPSO［J］. The Ocean Engineering, 2005, 23(3): 16.
［9］余小川, 谢永和, 李润培, 等. 水深对超大型FPSO运动响应与波浪载荷的影响［J］. 上海交通大学学报, 2005, 39(5): 674677.
YU Xiaochuan, XIE Yonghe, LI Runpei, et al. The influence of water depth on motion response and wave induced loads of a large FPSO［J］. Journal of Shanghai Jiao Tong University, 2005, 39(5): 674677.
［10］贺五洲，周正全. 水深对船舶运动和波浪载荷的影响［J］. 中国造船, 1997, 136(1): 17.
HE Wuzhou, ZHOU Zhengquan. The effects of water depth on the ship motions and sea loads［J］. Ship Building of China, 1997, 136(1): 17.
［11］吴晞, 韩晓光, 李宇辰. 水深对船舶摇荡运动影响的数值方法研究［J］. 交通信息与安全, 2013, 177(31):4548.
WU Xi, HAN Xiaoguang, LI Yuchen. Numerical method for impact of water depth on ship swaying motions［J］. Computer and Communications Computer Communication. 2013, 177(31): 4548.
［12］HUO Fali， ZHANG Huixin， SUO Jian, et al. Sensitivity analysis of wave slamming load with respect to wind load for semisubmersible platform design ［J］. Journal of Shanghai Jiao Tong University, 2015, 20(4):385394.
［13］BITNERGREGERSEN E M. Joint probabilistic description for combined seas［C］∥Proceedings of 24th International Conference on Offshore Mechanics and Arctic Engineering. Halkidiki, Greece: OMAE, 2005: 1217.
［14］Det Norske Verital AS. Environmental conditions and environmental loads: DNVRPC205 ［S］. Norway: DNV, 2010: 59127.
［15］Det Norske Verital AS. Columnstabilized units: DNVRPC103 ［S］. Norway: DNV, 2012: 4850.

[1]	赵子任1, 杜世昌1, 黄德林1, 任斐2, 梁鑫光2. 多工序制造系统暂态阶段产品质量#br# 马尔科夫建模与瓶颈分析[J]. 上海交通大学学报, 2017, 51(10): 1166-1173.
[2]	周鹏辉, 马红占, 陈东萍, 陈梦月, 褚学宁. 基于模糊随机故障模式与影响分析的#br# 产品再设计模块识别[J]. 上海交通大学学报, 2017, 51(10): 1189-1195.
[3]	李昌玺1, 2, 周焰1, 林菡3, 李灵芝1, 郭戈1. 基于MIMOFNN模型的弹道导弹目标#br# 时空序贯融合识别方法[J]. 上海交通大学学报, 2017, 51(9): 1138-.
[4]	冯明月, 何明浩, 韩俊, 郁春来. 基于协方差拟合旋转不变子空间信号参数#br# 估计算法的高分辨到达角估计[J]. 上海交通大学学报, 2017, 51(9): 1145-.
[5]	杨平1，盛杰1，王禹程2，李柱永1，金之俭1，洪智勇1. YBa2Cu3O7δ超导带材非均匀性对失超传播特性的影响[J]. 上海交通大学学报（自然版）, 2017, 51(9): 1090-1096.
[6]	王星, 周一鹏, 田元荣, 陈游, 周东青, 贺继渊. 基于改进遗传算法和SinChirplet原子的调频#br# 雷达信号稀疏分解[J]. 上海交通大学学报, 2017, 51(9): 1124-1130.
[7]	张良俊1, 2, 李晓慈1, 吴静怡1, 蔡爱峰1. 大型空间展开机构微重力环境模拟#br# 悬吊装置热结构耦合分析[J]. 上海交通大学学报, 2017, 51(8): 954-961.
[8]	夏海亮1, 2, 刘亚坤1, 2, 刘全桢3, 刘宝全3, 傅正财1, 2. 长持续时间雷电流分量作用下电极形状#br# 对金属烧蚀特性的影响[J]. 上海交通大学学报, 2017, 51(8): 903-908.
[9]	谷家扬, 谢玉林, 陶延武, 黄祥宏, 吴介. 新型浮式钻井生产储油平台#br# 涡激运动数值模拟及试验研究 [J]. 上海交通大学学报, 2017, 51(7): 878-885.
[10]	林达, 朱益佳, 魏小栋, 王志宇, 张武高. 喷油参数对聚甲氧基二甲醚/柴油发动机燃烧及其#br# 颗粒物排放的影响[J]. 上海交通大学学报, 2017, 51(7): 787-795.
[11]	孟庆阳1, 阎威武1, 胡勇1, 程建林1, 陈世和2, 张曦2. 基于子空间方法的超超临界机组#br# 过热蒸汽系统模型辨识[J]. 上海交通大学学报, 2017, 51(6): 672-678.
[12]	蒋华军a, 蔡艳a, b, 李超豪a, 李芳a, b, 华学明a, b. 基于改进Sobel算法的焊缝X射线图像#br# 气孔识别方法[J]. 上海交通大学学报, 2017, 51(6): 665-671.
[13]	董冠华,殷勤,殷国富,向召伟. 机床结合部耦合动刚度的辨识与建模[J]. 上海交通大学学报（自然版）, 2015, 49(09): 1263-1434.
[14]	谢启江，余海东. 硬岩掘进机刀盘载荷与撑靴接触界面刚度的耦合关系[J]. 上海交通大学学报（自然版）, 2015, 49(09): 1269-1275.
[15]	仲健林1，马大为1，任杰1，李士军2，王旭3. 基于平面应变假设的橡胶圆筒静态受压分析[J]. 上海交通大学学报（自然版）, 2015, 49(09): 1276-1280.