基于平面裁切的三角形乙烯-四氟乙烯气枕成形试验及数值模拟

上海交通大学学报 ›› 2016, Vol. 50 ›› Issue (03): 377-383.

基于平面裁切的三角形乙烯-四氟乙烯气枕成形试验及数值模拟

赵兵1,陈务军1,胡建辉1,邱振宇1,宋浩2,蔡晶2

(1.上海交通大学空间结构研究中心，上海 200240； 2.上海太阳膜结构有限公司，上海 200030）

收稿日期:2015-03-07 出版日期:2016-03-28 发布日期:2016-03-28
基金资助:
国家自然科学基金(51278299,51478264)资助项目

Experimental and Numerical Investigations of FormDevelopment of Ethylene-Tetrafluoroethylene Cushion Based on FlatPatterning

ZHAO Bing1，CHEN Wujun1，HU Jianhui1，QIU Zhenyu1,SONG Hao2，CAI Jing2

(1. Space Structures Research Centre, Shanghai Jiaotong University, Shanghai 200240, China; 2. Shanghai Taiyo Kogyo Co. Ltd., Shanghai 200030, China)

Received:2015-03-07 Online:2016-03-28 Published:2016-03-28

摘要/Abstract

摘要： 摘要：基于平面裁切的设计方法，制作了边长为2.5 m的正三角形乙烯四氟乙烯（ETFE）气枕模型，结合自动压力控制、三维摄影测量、激光测量等技术对ETFE气枕进行充气成形试验和测量分析. ETFE气枕经历了0～2 kPa的充气加压，压力为2 kPa、时间为24 h的黏弹性徐变，放气至0 kPa、时间为24 h的徐变恢复等一体化流程. 得到了各状态下的气枕内压值、上膜面整体形态和下膜面矢高值，并基于膜面形态计算出应力分布.通过与充气加压过程的几何非线性有限元分析结果进行比较分析，揭示了ETFE薄膜经历弹性变形、黏弹性徐变、徐变恢复等过程时的深刻力学性能与行为. 试验结果验证了基于平面裁切的成形设计方法的可行性，对ETFE气枕结构的推广和应用具有较高价值.

关键词: 乙烯-四氟乙烯气枕, 成形设计方法, 平面裁切, 充气成形, 黏弹性徐变, 徐变恢复, 摄影测量

Abstract: Abstract： An equilateral triangle ethylenetetrafluoroethylene (ETFE) cushion model with a side length of 2.5 m was developed based on the design method of flatpatterning. The experimental model was performed with a formdeveloping test, which was controlled and measured combining automatic pressure control, photogrammetry and laser sensor. The whole process of formdeveloping included an inflation from 0 kPa to 2 kPa, a viscoelastic creep under 2 kPa lased for 24 h, and a recovery under 0 kPa within 24 h. Some original parametric data, such as internal pressure values, shapes of upper layer and rises of lower layer were obtained. The stress distributions under different conditions were calculated based on the shapes. Some profound material mechanical properties and structural behaviors, such as elastic deformation, viscoelastic creep and creeprecovery, were revealed via the comparisons of results between experiments and numerical simulations. These results demonstrate the applicability, which will improve the popularization and application of ETFE cushion structure.

Key words: Key words： ethylene-tetrafluoroethylene (ETFE) cushion, forming design method, flatpatterning, formdeveloping, viscoelastic creep, creeprecovery, photogrammetry

中图分类号:

赵兵, 陈务军, 胡建辉, 邱振宇, 宋浩, 蔡晶. 基于平面裁切的三角形乙烯-四氟乙烯气枕成形试验及数值模拟[J]. 上海交通大学学报, 2016, 50(03): 377-383.

ZHAO Bing, CHEN Wujun, HU Jianhui, QIU Zhenyu, SONG Hao, CAI Jing. Experimental and Numerical Investigations of FormDevelopment of Ethylene-Tetrafluoroethylene Cushion Based on FlatPatterning[J]. Journal of Shanghai Jiao Tong University, 2016, 50(03): 377-383.

参考文献

［1］陈务军. 膜结构工程设计［M］. 北京：中国建筑工业出版社，2005. ［2］HOUTMANN R. Design recommendations for ETFE foil structures, Annex 5 TensiNet european design guide for tensile structures ［M］. Brussels: TensiNet, 2013. ［3］LECUYER A. ETFE: technology and design ［M］. Berlin: Walter de Gruyter, 2008. ［4］BORGART A. Mechanical behavior of multilayered air inflated cushions ［C］ ∥ International Conference on Textile Composites and Inflatable Structures. Barcelona, Spain: CIMNE, 2007: 340343. ［5］吴明儿, 刘建明, 张其林. ETFE薄膜气枕模型试验研究［J］. 建筑结构学报, 2008, 29(6): 126131. WU Minger, LIU Jianming, ZHANG Qilin. Experimental study on ETFE foil cushion ［J］. Journal of Building Structures, 2008, 29(6): 126131. ［6］顾磊, 王鹏, 陈世平, 等. ETFE气枕模型试验与有限元分析［J］. 建筑结构学报, 2012, 33(5): 4652. GU Lei, WANG Peng, CHEN Shiping, et al. Experimental study and FEA of ETFE cushion ［J］. Journal of Building Structures, 2012, 33(5): 4652. ［7］陈务军, 唐雅芳, 任小强, 等. ETFE气囊膜结构设计分析方法与数值分析特征研究［J］. 空间结构, 2010, 16(4): 3843. CHEN Wujun, TANG Yafang, REN Xiaoqiang, et al. Analysis methods of structural design and characteristics of numerical algorithm for ETFE air inflated film structures ［J］. Spatial Structures, 2010, 16(4): 3843. ［8］赵兵, 陈务军, 何艳丽. ETFE薄膜双层气枕结构试验研究［J］. 空间结构. 2013, 19(1): 6572. ZHAO Bing, CHEN Wujun, HE Yanli. Experimental study on doublelayer ETFE foil cushion ［J］. Spatial Structures, 2013, 19(1): 6572. ［9］王凯, 陈务军, 宋浩, 等. ETFE气枕与ETFE薄膜性能高温环境试验研究［J］. 空间结构, 2011, 17(3): 6973. WANG Kai, CHEN Wujun, SONG Hao, et al. Experiments on performances of ETFE cushion and properties of ETFE film in high temperature ［J］. Spatial Structures, 2011, 17(3): 6973. ［10］CHEN W, ZHAO B, HE Y, et al. Experiments on mechanical behavior and performance of ETFE cushion under low temperature environment ［C］ ∥ International conf on Textile Composite and Inflatable Structures. Barcelona, Spain: CIMNE, 2011: 292. ［11］ZHAO J, CHEN W, FU G, et al. Computation method of zerostress state of pneumatic stressed membrane structure ［J］. Science China Technological Sciences, 2012, 55(3): 717724. ［12］何艳丽, 陈务军, 赵俊钊. 充气膜结构的成形理论与试验研究［J］. 工程力学，2013, 30(4): 269274. HE Yanli, CHEN Wujun, ZHAO Junzhao. Research on forming theory and test of inflatable membrane structures ［J］. Engineering Mechanics, 2013, 30(4): 269274. ［13］HU J, CHEN W, ZHAO B, et al. Experimental studies on summer performance and feasibility of a BIPV/T ethylene tetrafluoroethylene (ETFE) cushion structure system ［J］. Energy and Buildings, 2014, 69: 394406. ［14］胡建辉, 陈务军, 赵兵, 等. PVETFE气枕系统冬季性能试验研究［J］. 浙江大学学报(工学版), 2014, 10(48): 18161821. HU Jianhui, CHEN Wujun, ZHAO Bing, et al. Experimental studies on system performance of PVETFE cushion system in winter ［J］. Journal of Zhejiang University (Engineering Science), 2014, 10(48): 18161821. ［15］SINGER P, STRBEL D, WAGNER R. Some remarks on determination of tension structures ECCOMAS ［C］ ∥ European Congress on Computational Methods in Applied Science and Engineering. Finland: University of Jyvaskyla, 2004. ［16］ZHAO B, CHEN W, HU J, et al. An innovative methodology for measurement of stress distribution of inflatable membrane structures［J］. Measurement Science and Technology,2016,27(2):025002.