黏性颗粒失流态化过程的实验研究

摘要/Abstract

摘要：

摘要：采用低温黏结的聚乙烯颗粒，在二维半热态内循环流化床实验台上模拟黏性颗粒高温失流态化过程，并对失流态化过程进行了规律性总结，对其床压信号进行了时域分析与频域分析.实验结果表明：从颗粒正常流化到失流态化可分为熔融、分层、成核、成团和死床5个阶段.时域分析中，压力变化可反映出床内失流态化发生的大致时间，标准偏差的变化先于均值的变化；频域分析中，频谱图上主频的变化明显于均值的变化，为防止床内出现失流态化提供了可能；通过对比不同测点的频谱图，可反映出床内最早出现失流态化的位置.

关键词: , 黏性颗粒, 失流态化, 压力信号, 时域分析, 频域分析

Abstract:

Abstract： The low-fusion-temperature polyethylene particles were used to simulate the process of high-temperature defluidization in a two-dimensional semithermal circulating fluidized bed. The process of defluidization can be divided into five stages, including fusion, layering, nucleation, agglomeration and shutdown. The time-domain analysis shows that pressure changes can reflect the approximate time of the occurrence of defluidization and the changes of standard deviation preceding the changes of average value. The frequencydomain analysis shows that the changes of dominant frequency in spectrogram are more obvious than that of average value, which makes it possible to prevent defluidization. By comparing the spectrogram of different measuring points, the earliest position of the defluidization can be obtained.

Key words: cohesive particle, defluidization, pressure signal, time-domain analysis, frequency-domain analysis

中图分类号:

TK 224

杨润东，范浩杰，陈博，梅登飞，杨俊波. 黏性颗粒失流态化过程的实验研究[J]. 上海交通大学学报（自然版）, 2015, 49(04): 572-576.

YANG Rundong，FAN Haojie，CHEN Bo，MEI Dengfei，YANG Junbo. Experimental Study on Process of Cohesive Particle Defluidization[J]. Journal of Shanghai Jiaotong University, 2015, 49(04): 572-576.

参考文献

［1］周勇敏,蔡顺华,张少明.大颗粒流态化特性的实验研究［J］.南京工业大学学报, 2005, 27(2):3438.

ZHOU Yongmin, CAI Shunhua, ZHANG Shaoming. Investigation on characteristics of fluidization of large particles ［J］. Journal of Nanjing University of Technology, 2005, 27(2):3438.

［2］WANG Qicheng, ZHANG Kai, REN Jintian, et al. Pressure fluctuation in a gassolid fluidized bed of Geldart B classification particle ［J］. Journal of Fuel Chemistry and Technology, 2009, 37(6): 763768.［3］Seville J P K, SilomonPflug H, Knight P C. Modelling of sintering in high temperature gas fluidization ［J］. Powder Technology, 1998, 97(2):160169.

［4］Skrifvars B J, Hupa M, Hiltunen M. Sintering of ash during fluidized bed combustion ［J］. Industrial & Engineering Chemistry Research, 1992, 31(4):10261030.

［5］Kuwagi K, Takano K, Horio M. The effect of tangential lubrication by bridge liquidon the behavior of agglomerating fluidized beds［J］. Powder Technology, 2000, 113(3):287298.

［6］王希,由长福,杨瑞昌. D类黏性颗粒流化黏结规律［J］.清华大学学报：自然科学版,2009,49(11):18181821.

WANG Xi, YOU Changfu, YANG Ruichang. Fluidization and agglomeration laws for type D cohesive particles［J］. Journal of Tsinghua University(Science and Technology), 2009, 49(11):18181821.

［7］郭庆杰,吕俊复,王昕,等.高温鼓泡流化床的流化行为［J］.热能动力工程,2002,17(101),481484.

GUO Qingjie, LU Junfu, WANG Xin, et al. Fluidization behavior of a hightemperature bubbling fluidized bed［J］. Journal of Engineering for Thermal Energy & Powe, 2002, 17(101), 481484.

［8］Svoboda K, Cermak J, Hartman M, et al. Influence of particle size on the pressure fluctuations and slugging in a fluidized bed ［J］. AIChE Journal, 1984, 30(3): 513517.

[1]	王聚团, 戚晓宁, 黄志明. 水下生产管汇测试技术及其改进研究[J]. 海洋工程装备与技术, 2022, 9(2): 43-49.
[2]	袁振钦, 邹科, 孙亚峰, 刘刚, 屈衍, 李居跃. 基于时域分析法的动态电缆疲劳分析[J]. 海洋工程装备与技术, 2022, 9(2): 50-55.
[3]	王娟, 杨明旺, 郑茂尧, 刘凌云, 赵立君. 高强钢在大型半潜式平台组块建造中的应用[J]. 海洋工程装备与技术, 2022, 9(1): 27-31.
[4]	陈欣, 赵晓磊, 王立坤, 肖德明, 张腾月. 深水大型吸力锚建造技术研究[J]. 海洋工程装备与技术, 2022, 9(1): 32-36.
[5]	尹彦坤, 易涤非. 半潜式生产平台船体结构关键节点工程临界评估[J]. 海洋工程装备与技术, 2022, 9(1): 52-57.
[6]	戴少怀, 杨革文, 郁文, 吴向上. 基于RBF神经网络的雷达有源压制干扰识别[J]. 空天防御, 2022, 5(1): 102-107.
[7]	MA Qunsheng (马群圣), CEN Xingxing (岑星星), YUAN Junyi (袁骏毅), HOU Xumin (侯旭敏). Word Embedding Bootstrapped Deep Active Learning Method to Information Extraction on Chinese Electronic Medical Record[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 494-502.
[8]	ZHANG Shengfa (张胜发), TANG Na (唐纳), SHEN Guofeng (沈国峰), WANG Han (王悍), QIAO Shan (乔杉). Universal Software Architecture of Magnetic Resonance-Guided Focused Ultrasound Surgery System and Experimental Study[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 471-481.
[9]	安庆升, 孙立东, 武秋生. 碳纤维增强复合材料发射筒设计研究[J]. 空天防御, 2021, 4(2): 13-.
[10]	KONG Xiangqiang (孔祥强), MENG Xiangxi (孟祥熙), LI Jianbo (李见波), SHANG Yanping (尚燕平), CUI Fulin (崔福林) . Comparative Study on Two-Stage Absorption Refrigeration Systems with Different Working Pairs[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 155-162.
[11]	ZHUANG Weimin (庄蔚敏), WANG Pengyue (王鹏跃), AO Wenhong (熬文宏), CHEN Gang (陈刚) . Experiment and Simulation of Impact Response of Woven CFRP Laminates with Different Stacking Angles[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 218-230.
[12]	ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉). Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 1-9.
[13]	HUANG Ningning (黄宁宁), MA Yixin (马艺馨), ZHANG Mingzhu (张明珠), GE Hao (葛浩), WU Huawei (吴华伟). Finite Element Modeling of Human Thorax Based on MRI Images for EIT Image Reconstruction[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 33-39.
[14]	WANG Xianjin, GAO Xu, YU Kuigang . Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 706-713.
[15]	QIAO Xing, MA Dan, YAO Xuliang, FENG Baolin. Stability and Numerical Analysis of a Standby System[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 769-778.