上海交通大学学报

上海交通大学学报（自然版） ›› 2013, Vol. 47 ›› Issue (12): 1968-1973.

• 电工技术 • 上一篇    下一篇

应用统计外推求解近海风机面外叶根部弯矩最大值

夏一青，王迎光   

  1. (上海交通大学 船舶海洋与建筑工程学院， 上海 200240)
     
  • 收稿日期:2012-11-26
  • 基金资助:

    海洋工程国家重点实验室自主研究课题 （GKZD010038）

Calculation of Out-of-Plane Bending Moment at the Blade Root of  Offshore Wind Turbines by Statistic Extrapolation
 

XIA Yiqing,WANG Yingguang
  

  1. (School of Naval Architecture, Ocean and Civil Engineering, Shanghai Jiaotong University, Shanghai 200240, China)
  • Received:2012-11-26

摘要：

根据IEC61400-3要求，为了确立统计外推程序以预测近海风机的长期载荷，选用NREL 5MW单桩式近海风机和浮式近海风机进行研究.在风机时域仿真中，对FAST软件进行编译，将塔筒载荷计算程序嵌入FAST，弥补了现有软件的不足.对于仿真得到的短期载荷，分别应用全局最大值法和分块最大值法拟合Gumbel分布来预测面外叶根部弯矩的最大值，并进行对比.根据对比结果，进一步提出了分块最大值法的最优分块数，并通过最大门槛值法进行验证，从而为近海风机的极限载荷计算提供参考.


 
 

 

关键词: 近海风机, 面外叶根部弯矩, 全局最大值法, 分块最大值法, FAST 编译

Abstract:

According to IEC61400-3, NREL 5MW Monopile wind turbine and OC3Hywind wind turbine were studied to predict longterm loads of offshore wind turbines. This paper compiles FAST to include the functionality of calculating the wind loads on the tower in the simulation. Two statistics extrapolation methods, i.e. global maximum and block maximum, were used respectively to fit Gumbel distribution to predict the extreme load of out-of-plane bending moment at the blade root, and the results were compared. Further, after discussing different block sizes, the optimal block size was suggested. The comparison of research results with peak-over-threshold method shows that the block maximum method can effectively predict loads, thus providing references for offshore wind turbines load calculation.
 

Key words: offshore wind turbines, out-of-plane bending moment at the blade root, global maximum, block maximum, FAST compiling

中图分类号: