基于相群平衡模型的舰船气泡尾流数值模拟

上海交通大学学报（自然版） ›› 2013, Vol. 47 ›› Issue (04): 538-543.

基于相群平衡模型的舰船气泡尾流数值模拟

傅慧萍

(上海交通大学海洋工程国家重点实验室，上海 200240)

收稿日期:2012-08-15 出版日期:2013-04-28 发布日期:2013-04-28
基金资助:
海洋工程国家重点实验室青年创新基金资助项目（GKZD01005918）

Numerical Simulation of Ship Bubbly Wake Based on Population Balance Model

FU Hui-Ping

(State Key Laboratory of Ocean Engineering, Shanghai Jiaotong University, Shanghai 200240, China)

Received:2012-08-15 Online:2013-04-28 Published:2013-04-28

摘要/Abstract

摘要： 为了获得舰船气泡尾流中的气泡尺度分布规律，首先采用欧拉双流体模型（Euler TwoFluid Model）中的单一气泡模型对集装箱船模型KCS（KRISO Container Ship）进行了数值模拟.然后将气泡分组，进行基于相群平衡模型（Population Balance Model）的数值模拟.获得的气泡数密度和体积分率等气泡分布特征后，通过对索特平均直径的分析，探讨了初始平均气泡直径的选取和气泡尺寸分组等因素对气泡尾流的影响.结果表明：大气泡将聚集在船体表面；自由面则以小气泡为主.ETF模拟可以作为PBM计算的初值.当初始化的均一气泡直径取值越接近索特平均直径，PBM计算越容易收敛.

关键词: 相群平衡模型, 舰船气泡尾流, 多相流, 数值模拟

Abstract: Firstly, the bubbly wake around a model-scaled KRISO container ship KCS was numerically simulated based on the Euler two-fluid(ETF) model with uniform bubble size. Then the bubbles were divided into a few size groups, and the ship bubbly wake was numerically simulated again based on a discrete population balance model(PBM). The size distribution characteristics of bubbles such as number density and volume fraction of each size were derived. The effects of initial uniform bubble size and the size groups on the wake were researched through the analysis of mean Sauter diameters. The results show that the big bubbles aggregate on the ship wall, while small bubbles on the free surface; the ETF results can be used as the initial value of PBM; the more close the uniform ETF bubble size to the mean Sauter diameter, the more easy the PBM computation converges.

Key words: population balance model, ship bubbly wake, multiphase flow, numerical simulation

中图分类号:

O 359.1

傅慧萍. 基于相群平衡模型的舰船气泡尾流数值模拟[J]. 上海交通大学学报（自然版）, 2013, 47(04): 538-543.

FU Hui-Ping. Numerical Simulation of Ship Bubbly Wake Based on Population Balance Model[J]. Journal of Shanghai Jiaotong University, 2013, 47(04): 538-543.

参考文献

［1］Borowski B, Sutin A, Roh H, et al. Passive acoustic threat detection in estuarine environments［C］ ∥ Proceedings of Society of PhotoOptical Instrumentation Engineers (SPIE) 6945. Orlando, FL, USA: SPIE, 2008: 694513_111.
［2］Trevorrow M V, Vagle S, Farmer D M. Acoustical measurements of microbubbles within ship wakes［J］. J Acoust Soc Am, 1994, 95:19221930.
［3］Dumbrell H A. Comparison of excess attenuation and backscatter measurements of ship wakes［M］. Southampton, UK: University of Southampton, 1997: 171178,
［4］Terril E J ,Fu T. Atsea measurements for ship hydromechanics［C］ ∥ Proceedings of 27th Symposium on Naval Hydrodynamics. Seoul, Korea: ONR, 2008: 128.
［5］Smirnov A, Celik I, Shi S. LES of bubble dynamics in wake flows［J］. Computers and Fluids, 2005, 34: 351373.
［6］Culver R L ,Trujillo M F. Measuring and modeling bubbles in ship wakes, and their effect on acoustic propagation［C］ ∥ Proceedings of the 2nd International Conference on Underwater Acoustic Measurements: Technologies and Results. Crete Greece: FORTH, 2007:563570.
［7］Carrica P M, Bonetto F J, Drew D A, et al. The interaction of background ocean air bubbles with a surface ship［J］. Int J Numer Methods Fluids, 1998, 28:571600.
［8］Carrica P M, Drew D, Bonetto F, et al. A polydisperse model for bubbly two phase flow around a surface ship［J］. Int J Multiphase Flow, 1999, 25(2): 257305.
［9］Moraga F J, Carrica P M, Drew D A, et al. A subgrid air entrainment model for breaking bow waves and naval surface ships［J］. Computers and Fluids, 2008, 37: 281298.
［10］Ma Jingsen, Oberai A A, Drew D A,et al. A comprehensive subgrid air entrainment model for RaNS modeling of freesurface bubbly flows［J］. Journal of Computational Multiphase Flows, 2011, 3(1): 4156.
［11］Fu Huiping, Wan Pengcheng. Numerical simulation on ship bubbly wake［J］. Journal of Marine Science and Application, 2011, 10(4): 413418.
［12］陈雷. 热态多相搅拌反应器流体力学性能研究［D］. 北京: 北京化工大学化学工程学院, 2009.
［13］沙作良, 伍倩, 王学魁. 不同黏度下气液体系流体力学行为的PBM模拟［J］. 化工进展, 2009, 28(增刊): 382387.
SHA Zuoliang, WU Qian, WANG Xuekui. PBM simulation on fluid mechanics of gasliquid system with different viscosity［J］. Chemical Industry and Engineering Progress, 2009, 28(sup): 382387.

[1]	丁恩宝, 常晟铭, 孙聪, 赵雷明, 吴浩. 半浸桨不同半径切面入水的水动力特性[J]. 上海交通大学学报, 2022, 56(9): 1188-1198.
[2]	吴怀娜, 冯东林, 刘源, 蓝淦洲, 陈仁朋. 基于门式抗浮框架的基坑开挖下卧隧道变形控制[J]. 上海交通大学学报, 2022, 56(9): 1227-1237.
[3]	刘谨豪, 严远忠, 张琪, 卞荣, 贺雷, 叶冠林. 地面堆载对既有隧道影响离心试验和数值分析[J]. 上海交通大学学报, 2022, 56(7): 886-896.
[4]	孙健, 彭斌, 朱兵国. 无油双涡圈空气涡旋压缩机的数值模拟及试验研究[J]. 上海交通大学学报, 2022, 56(5): 611-621.
[5]	秦汉, 伍彬, 宋玉辉, 刘金, 陈兰. 细长体高速风洞超大攻角支撑干扰数值分析[J]. 空天防御, 2022, 5(3): 44-51.
[6]	薛飞, 王誉超, 伍彬. 高速飞行器后向分离特性研究[J]. 空天防御, 2022, 5(3): 80-86.
[7]	杜登轩 , 乐绍林 , 周欢 , HtayHtayAung , 喻国良. 均匀来流中承台相对埋深对复合桩墩局部水动力及冲刷的影响 [J]. 海洋工程装备与技术, 2022, 9(2): 64-71.
[8]	郑高媛, 赵亦希, 崔峻辉. 车身用铝饰条拉弯成形面畸变缺陷形成规律[J]. 上海交通大学学报, 2022, 56(1): 53-61.
[9]	张晓嵩，万德成. 运动船舶周围为什么会出现大范围白色泡沫流动？[J]. 上海交通大学学报, 2021, 55(Sup.1): 65-66.
[10]	金戈, 范珉, 周振栋, 谭勇, 钟小波. 升降式止回阀动态特性分析与改进[J]. 上海交通大学学报, 2021, 55(S2): 110-118.
[11]	徐德辉, 顾汉洋, 刘莉, 黄超. 新型锥形式旋叶汽水分离器热态试验与数值研究[J]. 上海交通大学学报, 2021, 55(9): 1087-1094.
[12]	许海雨, 罗凯, 黄闯, 左振浩, 古鉴霄. 低弗劳德数通气超空泡初生及发展演变特性[J]. 上海交通大学学报, 2021, 55(8): 934-941.
[13]	刘恒, 伍锐, 孙硕. 非均匀流场螺旋桨空泡数值模拟[J]. 上海交通大学学报, 2021, 55(8): 976-983.
[14]	王超, 刘正, 李兴, 汪春辉, 徐佩. 自由状态冰块尺寸及初始位置参数对冰桨耦合水动力性能的影响[J]. 上海交通大学学报, 2021, 55(8): 990-1000.
[15]	李岩松, 丁鼎倩, 韩东, 刘静, 梁永图. 起伏输油管道临界完全携积水油速数值模拟[J]. 上海交通大学学报, 2021, 55(7): 878-890.