纯剪切横向密加筋板的加筋弯曲刚度门槛值

上海交通大学学报（自然版） ›› 2012, Vol. 46 ›› Issue (08): 1269-1273.

纯剪切横向密加筋板的加筋弯曲刚度门槛值

姬振华,王德禹

（上海交通大学海洋工程国家重点实验室，上海 200030）

收稿日期:2011-10-12 出版日期:2012-08-31 发布日期:2012-08-31

Threshold Value of Stiffener Bending Rigidity of Transverse Densely Stiffened Plate Under Pure Shear

JI Zhen-Hua, WANG De-Yu

(State Key Laboratory of Ocean Engineering, Shanghai Jiaotong University, Shanghai 200030, China)

Received:2011-10-12 Online:2012-08-31 Published:2012-08-31

摘要/Abstract

摘要： 针对由横向密加筋板组成的散货船舷侧板承担着较大的面内剪切载荷，而散货船共同结构规范中加筋弯曲刚度设计考虑的是舷外水压力,并没有考虑剪切载荷的问题,研究在剪切载荷作用下横向密加筋板的加筋弯曲刚度门槛值.通过改变加筋的高度，可以改变加筋弯曲刚度，从而使加筋板的剪切屈曲强度和极限强度也随之变化.根据加筋板的纯剪切弹性屈曲强度和极限强度等于材料的剪切屈服极限，找出2种加筋弯曲刚度的门槛值，并把这2种加筋弯曲刚度值与AASHTO规范所得值进行对比分析.结果表明，应由剪切极限强度分析来确定横向密加筋板的无量纲加筋弯曲刚度门槛值.

关键词: 横向密加筋板, 纯剪切, 弹性屈曲强度, 极限强度, 无量纲加筋弯曲刚度门槛值

Abstract: Side shells of bulk carriers composed of transverse densely stiffened plate are subjected to large inplane shearing forces, however stiffener bending rigidity is designed not according to shearing force but according to lateral pressure based on IACS common structural rules for bulk carriers. So it is necessary to investigate the threshold value of stiffener bending rigidity for the stiffened plate under shearing loads. Pure shear buckling strength and ultimate strength of transverse densely stiffened plates with different stiffener bending rigidities were investigated. Then the two kinds of stiffener bending rigidity threshold values were identified respectively when the two kinds of strength of stiffened plate reach the material shear yield limit, which were compared with the calculating value based on AASHTO specifications. The result indicates that the stiffener bending rigidity should be decided by ultimate strength analysis.

Key words: transverse densely stiffened plate, pure shear, elastic buckling strength, ultimate strength, threshold value of dimensionless stiffener bending rigidity

中图分类号:

U 661.4

姬振华, 王德禹. 纯剪切横向密加筋板的加筋弯曲刚度门槛值 [J]. 上海交通大学学报（自然版）, 2012, 46(08): 1269-1273.

JI Zhen-Hua, WANG De-Yu. Threshold Value of Stiffener Bending Rigidity of Transverse Densely Stiffened Plate Under Pure Shear[J]. Journal of Shanghai Jiaotong University, 2012, 46(08): 1269-1273.

参考文献

［1］Alinia M M, Habashi H R, Khorram A. Nonlinearity in the postbuckling behavior of thin steel shear panels［J］.ThinWalled Structures, 2009, 47(4): 412420.
［2］Alinia M M, Gheitasi A, Erfani S . Plastic shear buckling of unstiffened stocky plates［J］.Journal of Constructional Steel Research,2009,65(89):16311643.
［3］Gheitasi A, Alinia M M. Slenderness classification of unstiffened metal plates under shear loading［J］.ThinWalled Structures, 2010,48(7):508518.
［4］Alinia M M, Sarraf Shirazi R. On the design of stiffeners in steel plate shear walls［J］.Journal of Constructional Steel Research,2009,65(1011):20692077.
［5］Lee S C, Yoo C H. Strength of plate girder web panels under pure shear［J］.Journal of Structural Engineering, 1998, 124(2):184194.
［6］Lee S C, Yoo C H. Experimental study on ultimate shear strength of web panels［J］.Journal of Structural Engineering, 1999,125(8):847853.
［7］Yoo C H, Lee S C. Mechanics of web panel postbuckling behavior in shear［J］.Journal of Structural Engineering,2006, 132(10):15801589.
［8］邵青,何宇廷.复合材料加筋板剪切稳定性研究［J］.航空精密制造技术, 2010,46(6): 4648.
SHAO Qing, HE Yuting. Study on shear stability performance of composite stiffened panel［J］. Aviation Precision Manufacturing Technology, 2010,46(6): 4648.
［9］王平安，矫桂琼，王波，等.复合材料加筋板在剪切载荷下的屈曲特性研究［J］.机械强度，2009, 31(1): 078082.
WANG Pingan,JIAO Guiqing, WANG Bo, et al. Buckling performance analysis of stiffened composite plate under shear loading［J］. Journal of Mechanical Strength，2009, 31(1): 078082.
［10］Alinia M M. A study into optimization of stiffeners in plates subjected to shear loading［J］. ThinWalled Structures, 2005, 43(5):845860.
［11］Mijuskovic O, Coric B, Pavlovic M N. Transversestiffener requirements for the postbuckling behavior of a plate in shear［J］.ThinWalled Structures, 1999,34(1):4363.
［12］American Association of State Highway and Transportation Officials.AASHTO LRFD，bridge design specifications［M］. Washington DC: American Association of State Highway and Transportation Officials,2005.
［13］Shama M A. Shear stresses in bulk carriers due to shear loading［J］.Journal of Ship Research, 1975,19(3):155163.
［14］IACS. Common structural rules for bulk carriers［M］. London: International Association of Classification Societies, 2006.
［15］胡勇,崔维成.散货船碰撞损伤后的剪切极限强度［J］.船舶力学,2004,8(4):6879.
HU Yong, CUI Weicheng. Ultimate shear strength of bulk carrier with collision damage ［J］. Journal of Ship Mechanics,2004,8(4):6879.

[1]	陈松坤，王德禹. 基于神经网络的蒙特卡罗可靠性分析方法[J]. 上海交通大学学报（自然版）, 2018, 52(6): 687-692.
[2]	熊志鑫1，罗培林2. 深潜器耐压壳极限强度的模量算法[J]. 上海交通大学学报（自然版）, 2014, 48(04): 498-501.
[3]	张炜1, 蒲映超2, 唐文勇1, 张圣坤1. 考虑脱层损伤模式的复合材料船体梁极限强度分析[J]. 上海交通大学学报（自然版）, 2012, 46(03): 394-397.
[4]	师桂杰，王德禹. 集装箱船弯扭极限强度的相似模型分析[J]. 上海交通大学学报（自然版）, 2010, 44(06): 782-0786.