刀具柱面二维条码识读发光二极管照明均匀度仿真分析

上海交通大学学报（自然版） ›› 2011, Vol. 45 ›› Issue (07): 945-948.

• 自动化技术、计算机技术 • 下一篇

刀具柱面二维条码识读发光二极管照明均匀度仿真分析

王红霄，何卫平，雷蕾，林清松

(西北工业大学现代设计与集成制造重点实验室，西安 710072)

收稿日期:2010-12-08 出版日期:2011-07-29 发布日期:2011-07-29
基金资助:
国家自然科学基金资助项目（50505039）；学校重点毕业设计支持项目

Simulation and Analysis of Low Emitting Diode Illumination Uniformity for 2-D Bar Code Identification on Cutting Tool Cylindrical Surface

WANG Hong-Xiao, HE Wei-Ping, LEI Lei, LIN Qing-Song

(The Key Laboratory of Contemporary Design and Integrated Manufacturing Technology, Northwestern Polytechnical University, Xi’an 710072, China)

Received:2010-12-08 Online:2011-07-29 Published:2011-07-29

摘要/Abstract

摘要： 为了预测刀具柱面条码图像的光源设计能否达到照明均匀度要求，通过计算机辅助光学照明软件，在实际发光二极管(LED)光源实体模型、发光特性、光强分布分析的基础上建立仿真光源模型，根据实际应用要求进行拓展模型设计.分析了3种关键因素对LED照明均匀度的影响规律，对仿真和实验结果通过拟合曲线进行对比分析，验证了仿真模拟的正确性和指导性.研究结果对刀具柱面二维条码识读时的光学系统设计具有指导意义.

关键词: 二维条码, 光学系统, 照明均匀度

Abstract: To predict the illumination uniformity of the lighting design for 2-dimensional bar code image collection on cutting tool, this paper analyzed the practical low emitting diode(LED) light source model, its luminescence properties and the light intensity distribution based on a computer aided optical illumination software, built a light source simulation model, and designed a development model according to the practical application requirement. It also simulated and analyzed the three key factors on the impact of LED illumination uniformity, implemented experiments based on simulation, contrasted the simulation and experimental results by fitting the curve. The experimental results show that the simulation can correctly predict the actual uniformity of illumination. The research can help the optical system design for identifying 2-dimensional bar code directly marked on cylindrical surface of cutting tool.

Key words: two-dimensional bar code, illuminating optical system, illumination uniformity

中图分类号:

TP139.9

王红霄, 何卫平, 雷蕾, 林清松. 刀具柱面二维条码识读发光二极管照明均匀度仿真分析[J]. 上海交通大学学报（自然版）, 2011, 45(07): 945-948.

WANG Hong-Xiao, HE Wei-Ping, LEI Lei, LIN Qing-Song. Simulation and Analysis of Low Emitting Diode Illumination Uniformity for 2-D Bar Code Identification on Cutting Tool Cylindrical Surface[J]. Journal of Shanghai Jiaotong University, 2011, 45(07): 945-948.

参考文献

［1］刘玉兰，殷锐. 刀具信息采集的关键技术研究［J］.组合机床与自动化加工技术，2009(1):8490.

LIU Yulan, YIN rui. The research of key technologies for information gathering on cutting tool［J］. Modular Machine Tool & Automatic Manufacturing Technique, 2009(1):8490.

［2］胡海蕾. LED照明光学系统的设计及其阵列光照度分布研究［D］.福建：福建师范大学物理与光电信息技术学院，2005.

［3］安连生，王自强.照明光学系统的CAD［J］.灯与照明，1999,23(6):2931.

AN Liansheng, WANG Ziqiang.CAD of the illuminance optics system［J］.Light and Illuminance, 1999, 23(6):2931.

［4］苏宏东.半导体照明光学系统的设计与仿真［D］.福建厦门:厦门大学物理与机电学院，2008.

［5］屠大维, 吴仍茂.LED封装光学结构对光强分布的影响［J］.光学精密工程，2008,16(5):832837.TU Dawei, WU Rengmao. Effect of optical structure on output light intensity distribution in LED package［J］. Optics and Precision Engineering,2008, 16(5):832837.

［6］Huo Y M, Wu S M. The research and simulation of LED arrays in lighting［J］. Chinese Journal of Luminescence,2009,130(14):436440.

［7］Whang A J W, Chen Y Y, Teng Y T. Designing uniform illumination systems by surfacetailored lens and configurations of LED arrays［J］.Journal of Display Technology, 2009,5(3):94103.

［8］严萍，李剑清.照明用LED光学系统的计算机辅助设计［J］.半导体光电， 2004，25(3):181183.

YAN Ping, LI Jianqing. Computer aid design of optical system of LED for illumination［J］. Semiconductor Optoelectronics, 2004,25(3):181183.

[1]	郭改放,何卫平,李夏霜,王健,吴振芳. 基于边缘和水平集的复杂背景金属零件二维条码精确定位方法[J]. 上海交通大学学报（自然版）, 2017, 51(1): 90-.
[2]	谭秀文，华学明，李梦醒，叶欣，王飞. 基于光偏振原理的高速摄像光学系统 [J]. 上海交通大学学报（自然版）, 2011, 45(01): 101-0104.

刀具柱面二维条码识读发光二极管照明均匀度仿真分析

Simulation and Analysis of Low Emitting Diode Illumination Uniformity for 2-D Bar Code Identification on Cutting Tool Cylindrical Surface

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

本文评价