上海交通大学学报 ›› 2003, Vol. 37 ›› Issue (04): 566-569.doi: 10.16183/j.cnki.jsjtu.2003.04.023

所属专题: 王建华教授学报发文专辑

• • 上一篇    

盾构隧道装配式管片接头三维有限元分析

张厚美1,2, 张正林1, 王建华1   

  1. 1.上海交通大学建筑工程与力学学院,上海  200030
    2.广州市盾建地下工程有限公司,广州  510030
  • 收稿日期:2002-01-10 出版日期:2003-04-01 发布日期:2021-04-25
  • 作者简介:张厚美(1966-),男,福建永泰县人,高级工程师,博士,主要从事地下隧道结构计算及施工技术研究.

3-D FEM Analysis on Prefabricated Segment Joints of Shield Tunnel

ZHANG Hou-mei1,2, ZHANG Zheng-lin1, WANG Jian-hua1   

  1. 1.School of Civil Eng. and Mechanics, Shanghai Jiaotong Univ. , Shanghai 200030, China
    2.Guangzhou Municipal Dunjian Underground Construction Eng. Co. Ltd. , Guangzhou 510030
  • Received:2002-01-10 Online:2003-04-01 Published:2021-04-25

摘要:

根据Saenz公式将混凝土本构模型简化为双折线线性强化弹塑性模型,推导了混凝土弹塑性参数的计算公式.应用大型结构分析有限元软件Algor对装配式管片接头进行三维线弹性和弹塑性有限元分析,得到了混凝土应变、接头位移、接缝转角、螺栓拉力等计算结果,并将有限元计算结果与接头荷载试验测试结果进行了对比.研究表明,有限元计算值与试验值两者的变化规律是一致的,计算结果在反映结构应力/应变分布规律方面有重要参考作用.

关键词: 荷载试验, 本构模型, 盾构隧道, 有限元分析

Abstract:

The double lines strengthening elastic-plastic model was developed by simplifying the concrete constitutive law according to Saenz formula. The formulae for the model parameters were given. The structural analysis procedure Algor was taken to conduct the linear elastic and elastic-plastic FEM analysis on the joints of segments. The strain distribution of segment, the displacement of joints, the rotary angle of joints and the tensile force of joint bolts were given. The comparison between FEM calculation and test results was made, which shows that the finite element analysis results correspond with the test results. The FEM analysis results can bean effective measure to observe the distribution patterns of the strain and stress.

Key words: loading test, constitutive model, shield tunnel, finite element analysis

中图分类号: