Engineering & Al for Health

Fabrication of Functionally Fused Porous Tantalum/Lithium Magnesium Silicate Polymer Bone Repair Scaffolds

Expand
  • School of Mechanical Engineering, Xinjiang University, Urumqi 830017, China; 2. Sixth Affiliated Hospital, Xinjiang Medical University, Urumqi 830000, China

Received date: 2024-10-21

  Accepted date: 2025-01-17

  Online published: 2025-07-09

Abstract

The repair of severe bone defects remains a significant challenge in the field of orthopedics. 3D-printed metal-based scaffolds have been widely applied in bone repair due to their excellent structural and mechanical adaptability. However, conventional porous scaffolds lack the microstructure that mimics the extracellular matrix (ECM), limiting their osteointegration potential. Therefore, the development of composite bone repair materials with both biomimetic structures and biological activity has become a research focus. This study is based on the design of triply periodic minimal surfaces (TPMS) and constructs a melt-processed porous tantalum scaffold using gyroid and diamond units. Additionally, a gelatin-alginate-magnesium-lithium silicate (GE-SA-LAP) composite polymer is infiltrated into the scaffold, followed by freeze-drying to form a new composite bone scaffold material with both structural biomimicry and functionality. The TPMS structure mimics the microstructure and mechanical properties of natural trabecular bone, while the polymer filling further mimics the ECM microenvironment, optimizing conditions for cell attachment and proliferation. The characteristics and biocompatibility of the porous tantalum-polymer composite scaffold were evaluated through finite element simulation, mechanical property testing, scanning electron microscopy, and in vitro cell experiments. Finite element analysis revealed that the elastic modulus of the scaffolds in each group ranged from 1.21 to 1.55 GPa, yield strength ranged from 29.81 to 39.68 MPa, and permeability ranged from 2.72×10⁻⁸ to 3.45×10⁻⁸ m², falling within the range of human cortical and trabecular bone. The GE-SA-LAP composite polymer, which fills the pores, exhibits high porosity and provides an ideal biological microenvironment for cell attachment. In vitro cell experiments further validated that the composite scaffold outperforms the pure tantalum scaffold in terms of cell attachment and proliferation, demonstrating exceptional potential for bone tissue repair.

Cite this article

JING Lei, HAI Jizhe, SHAN Chunlong, XU Qingyu, LEI Yueheng, LI Haijie . Fabrication of Functionally Fused Porous Tantalum/Lithium Magnesium Silicate Polymer Bone Repair Scaffolds[J]. Journal of Shanghai Jiaotong University(Science), 2026 , 31(5) : 1290 -1301 . DOI: 10.1007/s12204-025-2834-4

References

[1] YE J H, HE W H, WEI T P, et al. Mechanical properties directionality and permeability of fused triply periodic minimal surface porous scaffolds fabricated by selective laser melting [J]. ACS Biomaterials Science & Engineering, 2023, 9(8): 5084-5096.
[2] WANG X, NING B Y, PEI X B. Tantalum and its derivatives in orthopedic and dental implants: Osteogenesis and antibacterial properties [J]. Colloids and Surfaces B: Biointerfaces, 2021, 208: 112055.
[3] GUO Y, XIE K, JIANG W B, et al. In vitro and in vivo study of 3D-printed porous tantalum scaffolds for repairing bone defects [J]. ACS Biomaterials Science & Engineering, 2019, 5(2): 1123-1133.
[4] ZHANG C G, CHEN H, FAN H Q, et al. Radial head replacement using personalized 3D printed porous tantalum prosthesis [J]. Journal of Materials Research and Technology, 2022, 20: 3705-3713.
[5] WANG G J, SHEN L D, ZHAO J F, et al. Design and compressive behavior of controllable irregular porous scaffolds: Based on voronoi-tessellation and for additive manufacturing [J]. ACS Biomaterials Science & Engineering, 2018, 4(2): 719-727.
[6] XU Q Y, HAI J Z, SHAN C L, et al. Mechanical and permeability properties of radial-gradient bone scaffolds developed by voronoi tessellation for bone tissue engineering [J]. Journal of Shanghai Jiao Tong University (Science), 2024. https://doi.org/10.1007/s12204-024-2770-8
[7] DI LUCA A, LONGONI A, CRISCENTI G, et al. Toward mimicking the bone structure: Design of novel hierarchical scaffolds with a tailored radial porosity gradient [J]. Biofabrication, 2016, 8(4): 045007.
[8] WANG N Y, MEENASHISUNDARAM G K, KANDILYA D, et al. A biomechanical evaluation on Cubic, Octet, and TPMS gyroid Ti6Al4V lattice structures fabricated by selective laser melting and the effects of their debris on human osteoblast-like cells [J]. Biomaterials Advances, 2022, 137: 212829.
[9] GUI X Y, ZHANG B Q, SONG P, et al. 3D printing of biomimetic hierarchical porous architecture scaffold with dual osteoinduction and osteoconduction biofunctions for large size bone defect repair [J]. Applied Materials Today, 2024, 37: 102085.
[10] GAO R N, XIONG Y Z, ZHANG H, et al. Mechanical properties and biocompatibilities of radially graded porous titanium/tantalum fabricated by selective laser melting [J]. Rare Metal Materials and Engineering, 2021, 50(1): 249-254 (in Chinese).
[11] ZHANG X, HAI J, SHAN C, et al. Construction of microstructure and nutrient transport properties of tibial segmental implant prosthesis [J]. Revista Internacional de Métodos Numéricos Para Cálculo y Diseño En Ingeniería, 2024, 40(2): 1-9.
[12] DAVOODI E, MONTAZERIAN H, ESMAEILIZADEH R, et al. Additively manufactured gradient porous Ti-6Al-4V hip replacement implants embedded with cell-laden gelatin methacryloyl hydrogels [J]. ACS Applied Materials & Interfaces, 2021, 13(19): 22110-22123.
[13] KUMAR A, NUNE K C, MISRA R K. Design and biological functionality of a novel hybrid Ti-6Al-4V/hydrogel system for reconstruction of bone defects [J]. Journal of Tissue Engineering and Regenerative Medicine, 2018, 12(4): 1133-1144.
[14] QIAO S C, WU D L, LI Z H, et al. The combination of multi-functional ingredients-loaded hydrogels and three-dimensional printed porous titanium alloys for infective bone defect treatment [J]. Journal of Tissue Engineering, 2020, 11: 2041731420965797.
[15] WU Z X, LI Q, XIE S, et al. In vitro and in vivo biocompatibility evaluation of a 3D bioprinted gelatin-sodium alginate/rat Schwann-cell scaffold [J]. Materials Science and Engineering: C, 2020, 109: 110530.
[16] CHEN N, ZHU K, ZHANG Y S, et al. Hydrogel bioink with multilayered interfaces improves dispersibility of encapsulated cells in extrusion bioprinting [J]. ACS Applied Materials & Interfaces, 2019, 11(34): 30585-30595.
[17] MIAO S. The effect of laponite concentration on the osteogenic effect of composite hydrogel [D]. Xi’an: Air Force Medical University of PLA, 2023 (in Chinese).
[18] SHEIKHI A, AFEWERKI S, OKLU R, et al. Effect of ionic strength on shear-thinning nanoclay–polymer composite hydrogels [J]. Biomaterials Science, 2018, 6(8): 2073-2083.
[19] GAHARWAR A K, MIHAILA S M, SWAMI A, et al. Bioactive silicate nanoplatelets for osteogenic differentiation of human mesenchymal stem cells [J]. Advanced Materials, 2013, 35(22): 2300774.
[20] LI Y, XIAO L, WEI D, et al. Injectable biomimetic hydrogel guided functional bone regeneration by adapting material degradation to tissue healing [J]. Advanced Functional Materials, 2023, 33(19): 2213047.
[21] ZHENG X Y, FU Z B, DU K, et al. Minimal surface designs for porous materials: From microstructures to mechanical properties [J]. Journal of Materials Science, 2018, 53(14): 10194-10208.
[22] AL-KETAN O, ABU AL-RUB R K. MSLattice: A free software for generating uniform and graded lattices based on triply periodic minimal surfaces [J]. Material Design & Processing Communications, 2021, 3(6): e205.
[23] YANG L, MERTENS R, FERRUCCI M, et al. Continuous graded Gyroid cellular structures fabricated by selective laser melting: Design, manufacturing and mechanical properties [J]. Materials & Design, 2019, 162: 394-404.
[24] WU X Z. A study on the laser 3D printing process and biomechanical properties of porous tantalum for orthopedic implant [D]. Beijing: China Academy of Machinery Science and Technology, 2021 (in Chinese).
[25] YANG L, WU S Q, YAN C Z, et al. Fatigue properties of Ti-6Al-4V Gyroid graded lattice structures fabricated by laser powder bed fusion with lateral loading [J]. Additive Manufacturing, 2021, 46: 102214.
[26] ZHANG X B, GONG H. Simulation on tissue differentiations for different architecture designs in bone tissue engineering scaffold based on cellular structure model [J]. Journal of Mechanics in Medicine and Biology, 2015, 15(3): 1550028.
[27] MAMUTI M, CHAO L, TIAN Z J. Analysis of mechanical characteristics and permeability of TPMS and Voronoi porous structure for bone scaffold [J]. Computer Methods in Biomechanics and Biomedical Engineering, 2024: 1-14.
[28] SYAHROM A, ABDUL KADIR M R, ABDULLAH J, et al. Permeability studies of artificial and natural cancellous bone structures [J]. Medical Engineering & Physics, 2013, 35(6): 792-799.
Outlines

/

〈 〉