The jacking pinions and rack chocks of the fixation system of a jack-up sustain tremendous load in the elevated condition, especially when there exists a remarkable non-uniformity of the load distribution. Failures of these structural components may lead to disastrous consequence of the jack-up. Despite the importance of these components, it is difficult to give an accurate prediction of the load distribution on these components in engineering application due to the complex nonlinear interaction mechanism, which is influenced by the relative stiffness of the components, leg-guide clearance and backlash. Previous studies mainly focus on the global performance of the jack-up and pay little attention to the load distribution on the pinions and chocks. The strength of the jacking system is often guaranteed by the manufacturer for an estimate load level, which brings in uncertainty to the safety of the jack-up. The characteristics of the hull-leg interaction are discussed in this paper, and a simplified method using gap elements is proposed. The nonlinear structural analyses are carried out for a specific jack-up using the proposed method and the three-dimensional finite element method (FEM) with contact algorithm. The proposed method is proved accurate and effective for the engineering application. The characteristics of the load distribution of the specific jack-up are discussed, and the conclusions are presented.
Yi-kan Zheng (郑轶刊), Shi-lian Zhang (张世联) & Lei Lai (赖 蕾)
. Load distribution on the hull-leg connection components of a jack-up[J]. Journal of Shanghai Jiaotong University(Science), 2015
, 20(6)
: 721
.
DOI: 10.1007/s12204-015-1682-z
[1] Det Norske Veritas. Recommended practice DNV-RPC104[R]. Norway: Det Norske Veritas, 2011.
[2] Spidsøe N, Karunakaran D. Nonlinear dynamic behaviour of jack-up platforms [J]. Marine Structures,1996, 9(1): 71-100.
[3] SNAME. Technical & research bulletin 5-5A guidelines for the site specific assessment of mobile jack-up units
[R]. New Jersy: SNAME, 2002
[4] Peng Ding, Zhang Le. The study of power-driven jacking gear of offshore self-elevating platform [J]. China Offshore Platform, 2007, 22(2): 44-47 (in Chinese).
[5] Williams M S, Thompson R S G, Houlsby G T. Non-linear dynamic analysis of offshore jack-up units [J]. Computers and Structures, 1998, 69(2): 171-180.
[6] Williams M S, Thompson R S G, Houlsby G T. A parametric study of the non-linear dynamic behaviour of an offshore jack-up unit [J]. Engineering Structures, 1999, 21(5): 383-394.
[7] Tan X, Li J, Lu C. Structural behaviour prediction for jack-up units during jacking operations [J]. Computers
and Structures, 2003, 81(24-25): 2409-2416.
[8] Gaddy D E. Redesigned jack up elevating system expands harsh-environment operating range [J]. Oil
&Gas Journal, 1998, 96(41): 77-83.
[9] Li D, Tian H, Wang Y, et al. The hydraulic jackup system design on the ocean petroleum platform
161: The first self-installing product platform in China [J]. Advanced Manufacturing Systems, 2011, 201-203:
1015-1018.
[10] Chen Hong. The latest development of jack-up drilling platform [J]. China Offshore Platform, 2008, 23(5): 1-
7 (in Chinese).
[11] Song Guang-xing, Lin Zhen, Zhang Xin, et al. 3-dimensional contacting finite element analysis for selfelevating
platform gear and rack driven set [J]. Shipbuilding of China, 2008, 49(Special 2): 342-347 (in
Chinese).
[12] MSC. MSC Nastran 2012: Implicit nonlinear user’s guide [R]. Santa Ana: MSC, 2011.
