With rigorous dynamic performance of mechanical products, it is important to identify dynamicparameters exactly. In this paper, a response surface plotting method is proposed and it can be applied to identifythe dynamic parameters of some nonlinear systems. The method is based on the principle of harmonic balancemethod (HBM). The nonlinear vibration system behaves linearly under the steady-state response amplitude, whichpresents the equivalent stiffness and damping coefficient. The response surface plot is over two-dimensional space,which utilizes excitation as the vertical axis and the frequency as the horizontal axis. It can be applied to observethe output vibration response data. The modal parameters are identified by the response surface plot as linearityfor different excitation levels, and they are converted into equivalent stiffness and damping coefficient for eachresonant response. Finally, the HBM with first-order expansion is utilized for identification of stiffness and dampingcoefficient of nonlinear systems. The classical nonlinear systems are applied in the numerical simulation as theexample, which is used to verify its effectiveness and accuracy. An application of this technique for nonlinearityidentification by experimental setup is also illustrated.
LIU Xin ∗ (刘鑫), WANG Lixiao (王力晓), CHEN Qidong (陈启东), SUN Beibei (孙蓓蓓)
. Parameter Identification of Structural Nonlinearity by Using Response Surface Plotting Technique[J]. Journal of Shanghai Jiaotong University(Science), 2021
, 26(6)
: 819
-827
.
DOI: 10.1007/s12204-020-2242-8
[1] NO¨ EL J P, KERSCHEN G. Nonlinear system identificationin structural dynamics: 10 more years ofprogress [J]. Mechanical Systems and Signal Processing,2017, 83: 2-35.
[2] LIU X, SUN B B, LI L, et al. Nonlinear identificationand characterization of structural joints based on vibrationtransmissibility [J]. Journal of Southeast University(English Edition), 2018, 34(1): 36-42.
[3] CHEN C Y, SONG H W，WANG D Y, et al. The naturalfrequency shift of satellite vibration test and parameteridentification of nonlinear in satellite structure[J]. Journal of Shanghai Jiao Tong University, 2005,39(7): 1197-1200 (in Chinese). [4] AGUIRRE L A, LETELLIER C. Modeling nonlineardynamics and chaos: A review [J]. Mathematical Problemsin Engineering, 2009, 2009: 238960.
[5] LIU X,WANG L X, CHEN Q D, et al. Nonlinear modelingand identification of structural joint by responsecontrol vibration test [J]. Transactions of Nanjing Universityof Aeronautics and Astronautics, 2019, 36(6):964-976.
[6] MAO K, LI B, WU J, et al. Stiffness influential factorsbaseddynamic modeling and its parameter identificationmethod of fixed joints in machine tools [J]. InternationalJournal of Machine Tools and Manufacture,2010, 50(2): 156-164.
[7] G¨OGE D, SINAPIUS M, F¨ULLEKRUG U, et al. Detectionand description of non-linear phenomena in experimentalmodal analysis via linearity plots [J]. InternationalJournal of Non-Linear Mechanics, 2005,40(1): 27-48.
[8] AHMADIAN H, ZAMANI A. Identification of nonlinearboundary effects using nonlinear normal modes[J]. Mechanical Systems and Signal Processing, 2009,23(6): 2008-2018.
[9] PRAWIN J, RAMA MOHAN RAO A, LAKSHMI K.Nonlinear identification of structures using ambient vibrationdata [J]. Computers & Structures, 2015, 154:116-134.
[10] NO¨EL J P, KERSCHEN G, FOLT?ETE E, et al. Greyboxidentification of a non-linear solar array structureusing cubic splines [J]. International Journal of Non-Linear Mechanics, 2014, 67: 106-119.
[11] ALEJO D, ISIDRO L, JES′US R, et al. Parameter estimationof linear and nonlinear systems based on orthogonalseries [J]. Procedia Engineering, 2012, 35: 67-76.
[12] G¨OGE D, SINAPIUS M, F¨ULLEKRUG U, et al. Detectionand description of non-linear phenomena in experimentalmodal analysis via linearity plots [J]. InternationalJournal of Non-Linear Mechanics, 2005,40(1): 27-48.
[13] SADATI S M S, NOBARI A S, NARAGHI T. Identificationof a nonlinear joint in an elastic structure usingoptimum equivalent linear frequency response function[J]. Acta Mechanica, 2012, 223: 1507-1516.
[14] ¨OZER M B, ¨OZG¨UVEN H N, ROYSTON T J. Identificationof structural non-linearities using describingfunctions and the Sherman-Morrison method [J]. MechanicalSystems and Signal Processing, 2009, 23(1):30-44.
[15] FELDMAN M, BRAUN S. Nonlinear vibrating systemidentification via Hilbert decomposition [J]. MechanicalSystems and Signal Processing, 2017, 84: 65-96.
[16] JALALI H, AHMADIAN H, MOTTERSHEAD J E.Identification of nonlinear bolted lap-joint parametersby force-state mapping [J]. International Journal ofSolids and Structures, 2007, 44(25/26): 8087-8105.
[17] THOTHADRI M, CASAS R A, MOON F C, etal. Nonlinear system identification of multi-degree-offreedomsystems [J]. Nonlinear Dynamics, 2003, 32(3):307-322.
[18] AHMADIAN H, JALALI H. Generic element formulationfor modelling bolted lap joints [J]. Mechanical Systemsand Signal Processing, 2007, 21(5): 2318-2334.
[19] ARSLAN ¨O, AYKAN M, NEVZAT ¨OZG¨UVEN H.Parametric identification of structural nonlinearitiesfrom measured frequency response data [J]. MechanicalSystems and Signal Processing, 2011, 25(4): 1112-1125.
