The online detection of metal shaft parameters, such as torque, power and deformation, is widely applied in engineering projects. The power supply of metal shafts is the key to the detection reliability and practicality. However, traditional slip ring and battery power supply are limited in reliability and service life. In this paper, a side-mounted inductive power supply system for the rotating metal shaft is designed by using a Utype core. The equivalent reluctance and circuit models of the system are analyzed, and the methods of improving the coupling coefficient and transmission efficiency are proposed from theoretical analysis. Through the finite element simulation analysis of the system, the general relationships between the transmission power and efficiency of the system and the number of coil turns, the working frequency and the load are analyzed. The accuracy of theoretical analysis and simulation analysis is verified by the practical power transmission experiments. This paper provides a novel and reliable power supply method for inductive power supply of rotating equipment, and enriches the solutions of rotating power supply.
ZHAO Yong, JI Xiaojun, DAI Ming, QI Hongli, GAO Junkai
. Analysis of Transmission Power and Efficiency of Side-Mounted Inductive Power Supply System for Metal Rotary Shafts[J]. Journal of Shanghai Jiaotong University(Science), 2020
, 25(3)
: 273
-280
.
DOI: 10.1007/s12204-020-2181-4
[1] ABDOLKHANI A, HU A P, COVIC G A, et al. Through-hole contactless slipring system based on rotating magnetic field for rotary applications [J]. IEEE Transactions on Industry Applications, 2014, 50(6):3644-3655. [2] CHEN X, CHEN Q H, HE G M, et al. Control scheme and characteristics analysis of three-phase series resonant converter suitable for contactless slipring system [C]//Applied Power Electronics Conference and Exposition.Tampa, FL, USA: IEEE, 2017: 2873-2879. [3] BOYS J T, COVIC G A, GREEN A W. Stability and control of inductively coupled power transfer systems[J]. IEE Proceedings - Electric Power Applications,2000, 147(1): 37-43. [4] VILLA J L, SALL′AN J, OSORIO J F S, et al.High-misalignment tolerant compensation topology for ICPT systems [J]. IEEE Transactions on Industrial Electronics, 2011, 59(2): 945-951. [5] SALL′AN J, VILLA J L, LLOMBART A, et al. Optimal design of ICPT systems applied to electric vehicle battery charge [J]. IEEE Transactions on Industrial Electronics, 2009, 56(6): 2140-2149. [6] PANTIC Z, BAI S, LUKIC S M. Inductively coupled power transfer for continuously powered electric vehicles[C]//Vehicle Power and Propulsion Conference.Dearborn, MI, USA: IEEE, 2009: 1271-1278. [7] OLVITZ L, VINKO D, ˇSVEDEK T. Wireless power transfer for mobile phone charging device [C]//The 35th International Convention MIPRO. Opatija, Croatia:IEEE, 2012: 141-145. [8] WANG C S, COVIC G A, STIELAU O H. Power transfer capability and bifurcation phenomena of loosely coupled inductive power transfer systems [J]. IEEE Transactions on Industrial Electronics, 2004, 51(1):148-157. [9] ABDOLKHANI A, HU A P, NAIR N K C. A double stator through-hole type contactless slipring for rotary wireless power transfer applications [J]. IEEE Transactions on Energy Conversion, 2014, 29(2): 426-434. [10] ABDOLKHANI A, HU A P. Improved coupling design of contactless slipring for rotary applications [J]. IEEE Journal of Emerging and Selected Topics in Power Electronics, 2015, 3(1): 288-295. [11] FAWZI T H, ALI K F, BURKE P E. Eddy current losses in finite length conducting cylinders [J]. IEEE Transactions on Magnetics, 2003, 19(5): 2216-2218. [12] WANG C S, STIELAU O H, COVIC G A. Design considerations for a contactless electric vehicle battery charger [J]. IEEE Transactions on Industrial Electronics,2005, 52(5): 1308-1314. [13] SUN Y, XIA C Y, ZHAO Z B, et al. Analysis and optimization on power transmission characteristics for voltage-fed ICPT system [J]. Advanced Technology of Electrical Engineering and Energy, 2011, 30(2): 9-12(in Chinese). [14] LI C S, ZHANG H, ZHA B T. Eddy current loss analysis of exterior metal dielectric for electromagnetic coupling structure in fuze wireless power supply system[J]. Journal of Nanjing University of Science and Technology,2011, 35(3): 347-351 (in Chinese). [15] SVALOV A V, ASEGUINOLAZA I R, GARCIAARRIBAS A, et al. Structure and magnetic properties of thin permalloy films near the “transcritical” state[J]. IEEE Transactions on Magnetics, 2010, 46(2):333-336. [16] ANTONOVA E E, LOOMAN D C. Finite elements for thermoelectric device analysis in ANSYS [C]//24th International Conference on Thermoelectrics. Clemson,USA: IEEE, 2005: 200-203.
