Reliability Evaluation of Compressor Systems Based on Universal Generating Function Method

Expand
  • (Beijing Key Laboratory of Urban Oil and Gas Distribution Technology, China University of Petroleum (Beijing), Beijing 102249, China)

Online published: 2018-06-19

Abstract

At present, universal generating function (UGF) is a reliability evaluation technique which holds the bare-looking and easily program-realized merits in multi-state system. Thus, it is meaningful to apply this method to an actual industry system. Compressor systems in natural gas pipelines are series-parallel multi-state systems, where the compressor units in each compressor station work in a parallel way and these pressure-boosting stations in the pipeline are series connected. Considering the characteristic of gas pipelines, this paper develops two different UGFs to evaluate the system reliability. One (Model 1) establishes a system model from every compressor unit while the other (Model 2) considers the whole system as a combination of multi-state components. Besides, all the parameters of “weight” in UGFs are obtained from thermal-hydraulic models based on the actual engineering and “probability” from Monte Carlo simulation. The results show that the system reliabilities calculated by different UGFs are approximately equal. In addition, the demand of gas and the gas pipeline transportation system show a reverse trend. Because the number of parameters needed in Model 2 is far less than that needed in Model 1, Model 2 is simpler programming and faster solved.

Cite this article

WEN Kai (温凯), LI Yichen (李熠辰), YANG Yang (杨洋), GONG Jing (宫敬) . Reliability Evaluation of Compressor Systems Based on Universal Generating Function Method[J]. Journal of Shanghai Jiaotong University(Science), 2018 , 23(2) : 291 -296 . DOI: 10.1007/s12204-018-1929-6

References

[1] DOS SANTOS S P, BITTENCOURT M A S,VASCONCELLOS L D. Compressor station availability:Managing its effects on gas pipeline operation[C]//Proceedings of 6th International Pipeline Conference.Calgary: ASME, 2006: 855-863. [2] DOS SANTOS S P. Availability and risk analysis effectson gas pipeline tariff making [C]//Proceedingsof 7th International Pipeline Conference. Calgary:ASME, 2008: 311-319. [3] DOS SANTOS S P, LEAL J E, OLIVEIRA F. Thedevelopment of a natural gas transportation logisticsmanagement system [J]. Energy Policy, 2011, 39(9):4774-4784. [4] LI X J, LI Y X, ZHANG M X, et al. Study on standbyscheme of compressor units based on binomial distribution[J]. Chemical Industry and Engineering Progress,2015, 34(9): 3487-3494 (in Chinese). [5] GAO P, XIE L Y. Reliability analysis of multi-statesystems based on improved universal generating function[J]. Acta Aeronautica Et Astronautica Sinica,2010, 31(5): 934-93 (in Chinese). [6] MASSIM Y, ZEBLAH A, BENGUEDIAB M, et al.Reliability evaluation of electrical power systems includingmulti-state considerations [J]. Electrical Engineering,2006, 88(2): 109-116. [7] LISNIANSKI A, LEVITIN G, BEN-HAIM H, et al.Power system structure optimization subject to reliabilityconstraints [J]. Electric Power Systems Research,1996, 39(2): 145-152. [8] LI W, ZUO M J. Reliability evaluation of multi-stateweighted k-out-of-n systems [J]. Reliability Engineeringand System Safety, 2008, 93(1): 160-167. [9] NEGI S, SINGH S B. Reliability analysis of nonrepairablecomplex system with weighted subsystemsconnected in series [J]. Applied Mathematics and Computation,2015, 262: 79-89. [10] LI J S. Reliability analysis of natural gas compressors[D]. Chengdu: Southwest Petroleum Institute, Collegeof Petroleum Engineering, 2005 (in Chinese). [11] SU X, WEN Y M, YE W H, et al. Failure analysis onSebei-Ningxia-Lanzhou gas pipeline system [J]. NaturalGas and Oil, 2011, 29(1): 12-14 (in Chinese). [12] ZHANG P, LIU S M, SUN Y, et al. Influential factorsfor unit consumption in Sebei-Xi’ning-Lanzhougas transmission pipeline [J]. Oil and Gas Storage andTransportation, 2015, 34(10): 1080-1086 (in Chinese). [13] KURZ R, LUBOMIRSKY M, BRUN K. Gascompressor station economic optimization [J]. InternationalJournal of Rotating Machinery, 2012.https://doi.org/10.1155/2012/715017 (published online).
Options
Outlines

/