Abstract: This paper investigates the gap between qualitative and quantitative constraints in spare parts stock
control, with specific reference to warship spare parts support projects. A critical literature review of theoretical
contributions about qualitative or quantitative factors for warship spare parts warehouse management is firstly
provided, which allows to analyze the reasons for this qualitative-quantitative gap by addressing the limitations of
spare parts models developed in the literature. Therefore a model including cloud model, marginal analysis and
Lagrange multiplier method (CML) for study is proposed in this paper to bridge the gap. The model is used to
solve the mix-constraints (both qualitative and quantitative constraints are considered) problem in a logic decision
diagram particularly at the different decision nodes of the diagram. Finally, verifying test results show that the
algorithm is feasible and its optimal support project meets the needs of engineering practices.
JIN Jiashan (金家善), CAI Zhiming* (蔡芝明), CHEN Yanqiao (陈砚桥)
. Warship Spare Parts Configuration Optimization for Stock Control: Investigating the Gap Between Qualitative and Quantitative Constraints[J]. Journal of Shanghai Jiaotong University(Science), 2017
, 22(4)
: 440
-448
.
DOI: 10.1007/s12204-017-1858-9
[1] SLEPTCHENKO A, VAN DER HEIJDEN M C, VAN HARTEN A. Effects of finite repair capacity in multiechelon,multi-indenture service part supply systems[J]. International Journal of Production Economics,2002, 79(3): 209-230.
[2] RUSTENBURG W D, VAN HOUTUM G J, ZIJM WH M. Spare parts management at complex technologybasedorganizations: An agenda for research [J]. InternationalJournal of Production Economics, 2001,71(1): 177-193.
[3] SHERBROOKE C C. Metric: A multi-echelon technique for recoverable item control [J]. Operations Research,1968, 16(1): 122-141.
[4] WEI S H, CHEN Y Q, JIN J S. Warship spare partsallotment method under space and cost constraints [J].Systems Engineering and Electronics, 2013, 35(12):2540-2544 (in Chinese).
[5] CAI Z M, JIN J S, CHEN Y Q, et al. Warshipspare parts allotment method under multi-constraints[J]. Systems Engineering and Electronics, 2015, 37(4):838-844 (in Chinese).
[6] LIU Y, GAI Q, ZHAO C, et al. Research on spare partsstorage decision for ships on sailing in multi-restrain[J]. Ship Science and Technology, 2013, 35(11): 144-147 (in Chinese).
[7] LEE L H, CHEW E P, TENG S, et al. Multi-objectivesimulation-based evolutionary algorithm for an aircraftspare parts allocation problem [J]. European Journal ofOperational Research, 2008, 89(2): 476-491.
[8] KLINE R C, BACHMAN T C. Estimating spare partsrequirements with commonality and redundancy [J].Journal of Spacecraft and Rockets, 2007, 44(4): 977-984.
[9] RUAN M Z, LI Q M, ZHANG G Y, et al. Optimizationmethod of carrying spare parts warship equipmentunder multi-constraints [J]. Acta Armamentarii, 2013,34(9): 1144-1149 (in Chinese).
[10] WANG N C, KANG R. An optimization model forinventory spares under multi-constraints and its decompositionalgorithm [J]. Acta Armamentarii, 2009,30(2): 247-251 (in Chinese).
[11] FEI G Y, ZHANG Z H, LIU J, et al. Configurationmethod of spares on warship [J]. Command Control &Simulation, 2014, 36(3): 133-136 (in Chinese).
[12] BIAN J H, GUO L H, KANG R, et al. Spares optimizationunder the influence of false alarm [J]. Journalof Beijing University of Aeronautics and Astronautics,2014, 40(3): 413-416 (in Chinese).
[13] WANG Z Y, CAO J P, ZHU Y H, et al. Optimizationmodel on removable spare parts warehouse deployment[J]. Systems Engineering and Electronics, 2013,35(11): 2352-2355 (in Chinese).
[14] XU L, LI Q M, RUAN M Z. Support project optimizationfor warship formation with finite repair capacity[J]. Systems Engineering and Electronics, 2014,36(11): 2226-2232 (in Chinese).
[15] WANG Z Y, CAO J P, ZHU Y, et al. An optimizationmodel of wartime spare parts resource allocation onconsideration of maintainability [J]. Acta Armamentarii,2014, 35(5): 719-724 (in Chinese).
[16] ROOSTAEE R. A multi-criteria intuitionistic fuzzygroup decision making method for supplier selectionwith VIKOR method [J]. International Journal ofFuzzy System Applications (IJFSA), 2012, 2(1): 1-17.
[17] HUANG H Z, LIU Y, LI Y F, et al. New evaluationmethods for conceptual design selection using computationalintelligence techniques [J]. Journal of MechanicalScience and Technology, 2013, 27(3): 733-746.
[18] LI D Y, MENG H J, SHI X M. Membership cloudsand membership cloud generators [J]. Journal of ComputerResearch and Development, 1995, 32(6): 15-20(in Chinese).
[19] FARLEY R D, PHUONG N, HAROLD D O. Numericalsimulation of cloud seeding using a threedimensionalcloud model [J]. The Journal of WeatherModification, 2014, 26(1): 113-124.
[20] REZAEI R, CHIEW T K, LEE S P, et al. Interoperabilityevaluation models: A systematic review [J].Computers in Industry, 2014, 65(1): 1-23.
[21] MOLENAERS A, BAETS H, PINTELON L, et al.Criticality classification of spare parts: A case study[J]. International Journal of Production Economics,2012, 140(2): 570-578.
[22] ROMEIJNDERS W, TEUNTER R, VAN JAARSVELD W. A two-step method for forecastingspare parts demand using information on componentrepairs [J]. European Journal of Operational Research,2012, 220(2): 386-393.
[23] COSTANTINO F, GRNVIO G D, TRONCI M. Multiechelon,multi-indenture spare parts inventory controlsubject to system availability and budget constraints[J]. Reliability Engineering & System Safety,2013, 119: 95-101.
[24] ZHANG F, YIN X Q. The standard time measurementbased on product batch production [J]. Journalof Shandong University of Technology (Natural ScienceEdition), 2014, 28(3): 56-59 (in Chinese).
[25] LI D Y, LIU C Y. Study on the universality of thenormal cloud model [J]. China Engineering Science,2004, 6(8): 28-34 (in Chinese).
