Calculation of Strain Amplification Matrix for Strain Invariant Failure Theory Based on Representative Volume Element Models with Periodical Boundary Condition

doi:10.1007/s12204-017-1871-z

上海交通大学学报（英文版） ›› 2017, Vol. 22 ›› Issue (5): 523-529.doi: 10.1007/s12204-017-1871-z

Calculation of Strain Amplification Matrix for Strain Invariant Failure Theory Based on Representative Volume Element Models with Periodical Boundary Condition

ZHAO Jian¹* (赵剑), WANG Hai¹ (汪海), LÜ Xinying¹ (吕新颖), XIE Zonghong² (谢宗蕻)

(1. School of Aeronautics and Astronautics, Shanghai Jiao Tong University, Shanghai 200240, China; 2. School of Astronautics, Northwestern Polytechnical University, Xi’an 710072, China)

出版日期:2017-09-30 发布日期:2017-09-30
通讯作者: ZHAO Jian(赵剑) E-mail: zhaojian_email@163.com

Calculation of Strain Amplification Matrix for Strain Invariant Failure Theory Based on Representative Volume Element Models with Periodical Boundary Condition

ZHAO Jian¹* (赵剑), WANG Hai¹ (汪海), LÜ Xinying¹ (吕新颖), XIE Zonghong² (谢宗蕻)

(1. School of Aeronautics and Astronautics, Shanghai Jiao Tong University, Shanghai 200240, China; 2. School of Astronautics, Northwestern Polytechnical University, Xi’an 710072, China)

Online:2017-09-30 Published:2017-09-30
Contact: ZHAO Jian(赵剑) E-mail: zhaojian_email@163.com

摘要/Abstract

摘要： Strain invariant failure theory (SIFT) is a micro-mechanics-based failure theory for multi-scale failure analysis of composite materials originally proposed by Gosse and Christensen. In this paper, the approach for obtaining strain amplification matrix which is a key step for the execution of SIFT is improved by adopting representative volume element (RVE) finite element models considering periodical boundary condition, based on which more actual deformation mode is reflected. The deformation modes and strain data at the characteristic points of the centroid cell of multi-cell RVE model are analyzed and taken as a reference. It can be concluded that more reasonable deformation mode and relationship between the micro-mechanical and macro-mechanical strain states are obtained by employing the new model. Finally, numerical examples are provided to illustrate the determination of strain amplification factors within the RVEs considering periodical boundary condition at the characteristic points.

关键词: micro-mechanical modeling, periodical boundary condition, representative volume element (RVE), strain invariant failure theory (SIFT)

Abstract: Strain invariant failure theory (SIFT) is a micro-mechanics-based failure theory for multi-scale failure analysis of composite materials originally proposed by Gosse and Christensen. In this paper, the approach for obtaining strain amplification matrix which is a key step for the execution of SIFT is improved by adopting representative volume element (RVE) finite element models considering periodical boundary condition, based on which more actual deformation mode is reflected. The deformation modes and strain data at the characteristic points of the centroid cell of multi-cell RVE model are analyzed and taken as a reference. It can be concluded that more reasonable deformation mode and relationship between the micro-mechanical and macro-mechanical strain states are obtained by employing the new model. Finally, numerical examples are provided to illustrate the determination of strain amplification factors within the RVEs considering periodical boundary condition at the characteristic points.

Key words: micro-mechanical modeling, periodical boundary condition, representative volume element (RVE), strain invariant failure theory (SIFT)

中图分类号:

TB 332

ZHAO Jian1* (赵剑), WANG Hai1 (汪海), LU Xinying1 (吕新颖), XIE Zonghong2 (谢宗蕻). Calculation of Strain Amplification Matrix for Strain Invariant Failure Theory Based on Representative Volume Element Models with Periodical Boundary Condition[J]. 上海交通大学学报（英文版）, 2017, 22(5): 523-529.

ZHAO Jian1* (赵剑), WANG Hai1 (汪海), LU Xinying1 (吕新颖), XIE Zonghong2 (谢宗蕻). Calculation of Strain Amplification Matrix for Strain Invariant Failure Theory Based on Representative Volume Element Models with Periodical Boundary Condition[J]. Journal of shanghai Jiaotong University (Science), 2017, 22(5): 523-529.

参考文献 10

[1]	LIU K S, TSAI S W. A progressive quadratic failure criterion for a laminate [J]. Composites Science and Technology, 1998, 58(7): 1023-1032.
[2]	GOSSE J H, CHRISTENSEN S. Strain invariant failure criteria for polymers in composite materials[C]//42nd AIAA/ASME/ASCE/AHS/ASC Structures,Structural Dynamics, and Materials Conference and Exhibit. Seattle: AIAA, 2001: 1-11.
[3]	LI R, KELLY D, MIKULIK Z. A SIFT approach for analysing failure by delamination and disbonding in composite structures [C]//5th Australasian Congress on Applied Mechanics. Brisbane: ACAM, 2007: 1-6.
[4]	YUDHANTO A. Effects of micromechanical factors in the strain invariant failure theory for composites[D]. Singapore: Department of Mechanical Engineering,National University of Singapore, 2005.
[5]	BUCHANAN D L, GOSSE J H, WOLLSCHAGER J A, et al. Micromechanical enhancement of the macroscopic strain state for advance composite materials [J].Composites Science and Technology, 2009, 69: 1974-1978.
[6]	TAY T E, LIU G, YUDHANTO A, et al. A micromacro approach to modelling progressive damage in composite structures [J]. International Journal of Damage Mechanics, 2008, 17: 5-28.
[7]	TAY T E, TAN S H N, TAN V B C, et al. Damage progression by the element-failure method (EFM) and strain invariant failure theory (SIFT) [J].Composites Science and Technology, 2005, 65: 935-944.
[8]	PIPES R B, GOSSE J H. An onset theory for irreversible deformation in composite materials [C]//17th International Conference on Composite Materials.Edinburgh: ICCM, 2009: 1-10.
[9]	CHAMIS C C, MURTHY P L N, MINNETYAN L. Progressive fracture in composite structures[J].Composite Materials: Fatigue and Fracture, 1997,6: 70-84.
[10]	XIA Z H, ZOU CW, YONG Q L, et al. On selection of repeated unit cell model and application of unified periodic boundary conditions in micro-mechanical analysis of composites [J]. International Journal of Solid and Structure, 2006, 43(2): 266-278.

Calculation of Strain Amplification Matrix for Strain Invariant Failure Theory Based on Representative Volume Element Models with Periodical Boundary Condition

Calculation of Strain Amplification Matrix for Strain Invariant Failure Theory Based on Representative Volume Element Models with Periodical Boundary Condition

可视化

摘要/Abstract

引用本文

使用本文

参考文献 10

相关文章 6

编辑推荐

Metrics

本文评价

[1]	HAN Qingsong (韩青松), CAI Xiangwen (蔡相文), FENG Xiaojuan (冯小娟), ZHANG Qingxiang (张. Comparison of Biomechanical Properties and Hemodynamics of Three Different Vena Cava Filters[J]. Journal of Shanghai Jiao Tong University (Science), 2018, 23(6): 803-810.
[2]	ZHANG Bin1,2* (张斌), YU Xiaoming1 (宇晓明), GU Boqin3 (顾伯勤). A Generalized Self-Consistent Model for Interfacial Debonding Behavior of Fiber Reinforced Rubber Matrix Sealing Composites[J]. 上海交通大学学报（英文版）, 2017, 22(3): 343-348.
[3]	李华东, 朱锡, 梅志远, 张颖军. [J]. Journal of Shanghai Jiao Tong University(Science), 2015, 20(6): 735-742.
[4]	GU Juan1 (顾隽), HUANG Xian-cong2 (黄献聪), LI Yan2 (李焱), WANG Xin-ling1 (王新灵)，SHI M. Improving the Stab-Resistance Performance of Ultra High Molecular Weight Polyethylene Fabric Intercalated with Nano-Silica-Fluid[J]. 上海交通大学学报（英文版）, 2014, 19(1): 102-109.
[5]	CHEN Kun-kun (陈昆昆), LIU Long-quan* (刘龙权), WANG Hai (汪海). Analysis of Through-the-Thickness Stress Distribution in Thick Laminate Multi-Bolt Joints Using Global-Local Method[J]. 上海交通大学学报（英文版）, 2013, 18(3): 326-333.
[6]	CAO Ning1* (曹宁), WANG Wen-bo2 (王文波), DONG Jian-wen2 (董建文). Animal Experiment of Viscose Carbon Fiber Based C/C Composites Applied in Bone Fracture Intramedullary Fixation[J]. 上海交通大学学报（英文版）, 2012, 17(5): 537-540.